What should I do if my iPhone6 fails to flash?

Apple 6 can't turn on after flashing, it may be that the flashing failed, the phone is turned off, and then press and hold the volume up button + power button + home button at the same time to enter the recovery mode interface.

Connect iTunes, turn off your iPhone, press and hold the Home button and the Power Off button at the same time for 10 seconds, release the Power Off button, continue to press and hold the Home button until you see the device recognized in DFU state on the computer, after the computer prompts, release the Home button, select the recovery option button on iTunes, and click Confirm Recovery in the pop-up selection box.

3.Next, iTunes will pop up a page prompting that everything will be erased, and it will also verify the recovery with Apple servers, when the verification and extraction of files are completed, iTunes will automatically reinstall the **good firmware version for the iPhone, wait for the installation to be successful, and then reinsert the mobile phone card to activate the iPhone online.

4.Software failure, if you are sure that the current mobile phone battery is sufficient, but it cannot be turned on normally, there may be a problem with the mobile phone software system. At this time, we can try to press the home button + power button on the home screen of the mobile phone at the same time until the screen is lit up and there is a display.

If this method doesn't work, we can also plug the phone into the power supply at this time, and then press the power and home button on the home screen at the same time to see if we can turn it back on.

5.The system crashes, if none of the above solutions work, and you see an iTunes connection screen on the screen of your iPhone 6, it means that the phone has entered recovery mode at this time. When this happens, the only way to do this is to restore the system for your phone.

6.Solution: Connect your phone with the computer with a data cable, press and hold the home button and the power button at the same time for 10 seconds, then release the power button, continue to press and hold the home button for 5 seconds, if you see connect to iTunes, it is a failure, and you have to start again.

If the screen doesn't light up after these 2 steps, you will enter DFU recovery mode, and then you can use iTunes to restore your iPhone, or use a third-party flashing software to reflash your iPhone.

If your iPhone fails to flash, one, **one iTunes, two, open your iTunes, press and hold the home button on the phone while connecting to the data cable, three, if you see that your iTunes has been restored, the phone will restart under normal circumstances, four, after activation, the phone needs to be set to a new phone to see if the activation is successful, you can.

Open your iTunes, connect the phone data cable at one end, don't connect the phone first, press and hold the home button to connect the data cable when the width difference is the same, then a recovery interface will appear on the computer, click Restore, and then wait patiently. x0d x0a step 3: If you see that your iTunes has been restored, the phone will restart under normal circumstances, if there is no possibility of a slight delay due to network problems, don't worry, if you jump out of the recovery interface again and you click it again may restart.

X0D X0A Step 4: After activation, the phone needs to be set to a new phone to see if the activation is successful, if the activation is successful, you can restore the backup operation, choose to use iCloud cloud backup and iTunes backup, according to the size of the backup data has a corresponding time, you need to wait patiently. Once the backup is complete, your phone will be ready to use.

Step 2: Open your iTunes, connect the phone data cable at one end, don't connect the phone first, press and hold the home button while connecting the data cable, then a recovery interface will appear on the computer, click Restore, and then wait patiently.

Step 3: If you see that your iTunes has been restored, the phone will restart under normal circumstances, if there is no possibility of a slight delay due to network problems, don't worry, if you jump out of the recovery interface again, you may restart when you click it again.

Step 4: After activation, the phone needs to be set to a new phone to see if the activation is successful, if the activation is successful, you can then restore the backup operation, choose to use iCloud cloud backup and iTunes backup, according to the size of the backup data has the corresponding time, you need to wait patiently. Once the backup is complete, your phone will be ready to use.

Apple Flashing Assistant is the world's first set of one-click query shsh, one-click backup shsh, one-click flashing function in one powerful weapon, you only need to gently press a button to complete the query shsh, backup shsh, and flash, truly fully automatic one-click flash.

Absolutely fool-proof, simple and easy to use, when you are deeply immersed in the tedious and complicated flashing and unlocking tutorials, this flashing tool may be your savior, fashionable you will not miss it.