How to change the floor tiles, how to deal with the floor tiles

When choosing floor tiles, it is important to consider the following aspects: First, it depends on the brand. Only well-known brands of floor tiles, the quality of their building materials can meet the national standards, and the content of harmful substances can be within a safe range.

Second, it depends on its anti-pollution ability, if the family is very busy and can only clean once in two or three days, then choose the one with better anti-pollution ability. Third, if there are elderly people and children at home, you must do a slip resistance test when purchasing.

Specifically, the selection of floor tiles can start from the following aspects:

1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.

Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.

3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.

4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.

6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.

7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.

All pry up and repost.

Or pry a few lattices out and paste different bricks.

It can be exchanged.

It is difficult to replace only a few floor tiles, because it is almost impossible to match the same color, model and style of floor tiles over the years. If the original floor tiles have been partially damaged, hollowed out or falling off, the surface enamel has been worn, or seriously dirty, it must be removed and replaced.

At present, there are two kinds of brick wall renovation materials on the market: tile surface treatment agent, tile and mosaic binder, which can be directly painted on the old brick surface, and then paved with new floor tiles, saving time and energy. Kitchen and bathroom floors, regardless of the type of tile, can be directly tiled with new tiles on top of the old ones.

Extended Materials. Precautions for tile paving.

1. Before paving, the object to be pasted or the ground should be flattened, and the dry paving method can only be paved with tiles when the base layer reaches a certain hardness, and the joints are adjusted between 2-3mm when paving.

2. Before paving, the tile needs to be soaked in clean water for 20-30 minutes, and the water can be filtered before paving, otherwise the water will evaporate after paving, and the tile will easily warp. Moreover, before use, you should check whether the color number and size indicated on the outer packaging are the models you ordered, and whether the bricks with a unified color number have defects such as color difference and broken threads. Only by using a uniform color number can the color be uniform.

3. If the pattern inlay characteristics are obvious, please identify the parquet characteristics, maintain a unified direction of paving, and the pattern features are not obvious or no pattern, please combine the construction effect requirements to pave.

4. After the paving is completed, the cement stains remaining on the brick surface should be wiped off in time. The ground that has been paved needs to be cured for 4-5 days to prevent local unevenness of the ground caused by external forces.

Yes, you can change it. Knock it off and reinstall it, and stick it directly on the original floor tiles, both of which can be used.

But beware:

1. It takes time to re-knock it out and reinstall it again, and the cost will be even higher.

2. If the floor is low and there is a suspended ceiling, it is best not to choose the wooden floor for direct paving, because the thickness of the ground for paving the wooden floor will be higher, which will make the floor spacing shorter.

3. If you pave it directly, it will raise the ground, pay attention to whether the door and door frame are kept level and can be used normally.

It can be, but it is more troublesome to change a cement that has solidified tiles, you first ask if there is a master who is willing to do it, and then ask him how much he wants, and then see if there is a batch of bricks with your bricks, if it is not a batch of goods a manufacturer, the size will be deviated, and then decide whether to change or not.

The tiles should be dug up first (usually cut in the middle) and then knocked out from both sides.

Ask a professional.

But it can only be applied with adhesive.

Yes, ask a worker to tear it down and put a new one on it.

If it's not obvious, don't change it, changing the page can be a trouble, and if you don't get it, it will be a good brick.

Ask a professional to construct it, dig it out in the middle, and if you don't do it well, you will also break the other bricks.

The tiles that have been pasted are not good-looking, I want to replace them, what should I do?

Changing the floor to floor tiles is a way that many people are now decorating. Floor tiles are more resistant to wear and tear than flooring, and are easier to clean, making them a cleaner and more hygienic choice for your home. However, in the process of changing floor tiles, there are some issues that need to be paid attention to.

The following is an introduction to the specific steps and precautions for changing floor tiles.

1.Preparation.

To carry out floor tiling, you need to prepare tools and materials first. The materials needed include floor tiles, cement, water-resistant glue, floor tile glue, and tools include floor tile cutters, electric drills, brushes, shovels, mops, and so on. In the process of preparing materials, it is necessary to pay attention to aspects such as the choice of color, brand, and size.

2.Demolition of old floors.

Begin to remove the old floors in the room. Here you need to use a shovel or other tool to shovel the floor down with force. Similarly, parts such as thresholds, baseboards, etc., also need to be removed.

If there are uneven parts of the floor, it needs to be sanded and leveled, so that the floor tiles can be better cemented to the ground.

3.Do a good job of waterproofing.

After removing the old floor, it needs to be waterproofed. Here, it is necessary to use materials such as cement and water-resistant glue to coat the ground with a layer to ensure the waterproof effect. Waterproofing can ensure that the floor tiles last longer.

4.Cut the floor tiles to size.

After measuring the size of the object according to the actual situation, use the floor tile cutting machine to cut the floor tiles. The cutting floor tile ports need to be smooth, otherwise it will affect the aesthetics and installation. When cutting floor tiles, take care that the distance between the mill and the floor tiles is even.

5.Paste the floor tiles.

Apply a layer of tile glue to the floor and apply the tiles to the floor according to the pre-determined pattern. Note that there should be a certain gap when tiling, so as not to crack the ground due to temperature changes.

6.Clean the floor.

After the floor tiles are pasted, cleaning work is required. Clean the floor of residual glue and cement particles. Here you can use a wet mop or detergent to clean the floor tiles to ensure that the floor tiles are clean and tidy.

In short, floor tiles are a complex job that requires experience and technology. If you can't do it yourself, you can ask a professional to help. Before making a floor tile modification, be sure to prepare the materials and tools, and carefully consider each step to ensure that the construction is completed smoothly.

At the same time, it is necessary to keep the floor clean and waterproof after completion to prolong the service life of the floor tiles.

Enter the area and get the decoration for free**].

What should I do if the wall tiles are pasted with tiles? What are the reasons why wall tiles are used for a short time and are easy to fall off? As a non-construction worker, you may not know much about this.

But don't worry, I'll reveal the answers for you one by one. What to do if the wall tiles are pasted with local tiles If the paving area is not very large, then the use of a long time will definitely occur hollowing, Zhaoye falling off and other phenomena, so it is recommended that you first remove the wall tiles on the ground, and re-pave the floor tiles. Of course, if the paving area is large and it is not convenient to reinstall, it is recommended that you make the family shout to use expansion screws to simply fix the floor wall tiles.

What are the reasons why wall tiles are used for a short time and are easy to fall off1. I believe we all know that the water absorption of wall tiles is related to the adhesion. Of course, the higher the water absorption, the better, because if the moisture is insufficient, it will be inconsistent with the shrinkage of the cement, which will cause the tile to fall off. 2. The grassroots work is not done well in the construction process, and the foundation is a common problem at present.

Many people will remove the wall skin when renovating a new house, but people simply or paint the wall. Of course, no matter how much you paint the wall, if the wall skin is not cleaned, it will greatly affect the friction and adhesion of the wall. In addition, insufficient watering of the walls or inadequate cleaning of the tiles can also leave hidden dangers.

3. When the cement mortar is not completely bonded and dry with the wall, it is best not to let it be impacted, otherwise the mortar will be cracked, which will lead to the phenomenon of sticking not firmly, and it is very likely to fall in the future. 4. The gaps between the tiles are well known, and there is a need to leave a certain gap between the bricks, mainly due to the thermal expansion and cold contraction that cause them to squeeze each other, resulting in fracture and falling off. In addition, the cement mortar on the back of the wall tile should not be too thick, which will not only affect the overall effect, but also accelerate the peeling off of the tile.

Summary: After reading the above introduction, I believe you have a further understanding of what to do if the wall tiles are pasted with local bricks. If you need to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

Do the math how much it will cost you to renovate your home

After tiling on the floor, some treatment measures need to be carried out to ensure that the overall surface of the brick is flat, stable and beautiful. Here are some common ways to deal with it:

1.Removal of floating dust and residues: Cleaning is required before and after tiling. Use a clean mop or vacuum cleaner to clean the brick surface to remove dust and gravel from the surface.

2.Caulking and sanding: Sanding work is carried out on the brick face to remove uneven and sharp edges on the surface. If the brick joint is too large, it needs to be caulked to fill the gap and scrape the surface.

3.Waterproofing and stain repellent: Floor tiles need to be coated with a layer of waterproof paint to protect the floor from water or liquids. In addition, antifouling membranes can be used to protect the brick surface from contamination and corrosion.

4.Overall polishing and beautification: Finally, you can use a brick polisher to polish the whole to improve the smoothness and aesthetics of the brick surface. In addition, decorative patterns and patterns can also be applied to the brick surface to beautify the overall effect.

In short, after tiling the floor, it is necessary to go through a series of treatment measures to ensure that the final effect meets the expected requirements and prolong the service life of the floor.

The floor tiles are pasted, and I don't like to change them.

01. You can continue to choose some floor tiles, in fact, if the original floor tiles of your house are not particularly good, it is likely to be the quality of the floor tiles themselves, which does not mean that all floor tiles are not good. So when reinstalling, in fact, we can choose some slightly better quality floor tiles, the current market floor tile brands are still quite a lot, if you want to buy floor tiles try to choose a first-line brand, so that the quality must be guaranteed, in addition to not greedy for cheap, buy some inferior goods. As the saying goes, you get what you pay for, and the quality of more expensive floor tiles may also be better.

02. If you think that the floor tiles are really not easy to use, then I personally think that you can also choose wooden flooring, of course, the types of floors themselves are also divided into many kinds, such as composite flooring, solid wood flooring and so on. Therefore, when choosing the floor, it can also be selected according to the actual situation of a Ming Beilu people, I personally think that the solid wood floor must be very good, although it is more expensive, but the quality is indeed guaranteed. 03. In fact, this phenomenon should be relatively common in rural areas, when many people build houses in rural areas, they will neither choose wooden floors nor floor tiles, and many people will choose to use cement floors directly.

The advantage of using cement floor is that the cost is relatively low, and the speed of construction will be particularly fast, of course, the disadvantage is that it is not very good-looking. 04. If you can directly use the marble floor, if your funds are more sufficient when decorating, then when decorating the floor, we can also directly choose to use all the whole marble for laying. Marble is divided into artificial marble and natural marble, natural marble is more expensive, so it is more high-end, and now the artificial marble on the market is actually more expensive, so if the funds are not sufficient, don't consider marble.