What material is better for kitchen and bathroom waterproofing? What should be paid attention to dur

The kitchen and bathroom are relatively stable parts of the house structure, the area is small, there are many pipes, if the membrane is not easy to cut and paste, and there will be a pungent smell, it is not very environmentally friendly to use indoors. Therefore, it is recommended to use mortar waterproofing agent, which is not only firm in adhesion with the base surface but also puncture-resistant, high strength, waterproof life can be the same life as the building, construction is also simple and convenient, and cost-effective, so it is the most widely used material now. As for **, it is also slightly lower than waterproofing membranes and waterproof coatings.

Note: 1. Ground treatment; 2. Wall treatment; 3. After the waterproof layer is done, a certain amount of time should be left to make the waterproof layer better integrated with the building, and then the protective layer on the waterproof layer and then paved with floor tiles. 4. Waterproof construction is a concealed project, and the follow-up construction may also damage the waterproof layer, if the floor tiles have been laid, do not smash the floor tiles, use professional waterproof materials to plug all the gaps and do a good job of waterproofing. It is also suitable for waterproofing projects after the failure of the waterproof layer in the bathroom; 5. Waterproofing is a systematic project, and the causes and treatment methods are different in each place.

Materials are the foundation, construction is the key.

It is better to use green waterproof coatings, non-toxic and tasteless, and will not cause harm to the body. The powder is a synthetic migratory metal mineral powder. The two are mixed and mixed according to the design ratio on site, brushed or scraped.

Wallite self-closing waterproof coating uses the natural compatibility of concrete and cement, after brushing concrete or mortar base, penetration and film formation, to form a seamless semi-rigid and semi-tough continuous elastic waterproof plastic mold with roots and thorns.

Correct material selection and construction is the core of waterproofing, and the selection of waterproof products is the key to determining the quality of waterproofing and later use.

First, look at the product performance, choose excellent products with waterproof ability + environmental protection.

There are many waterproof products on the market, but there are only a handful of waterproof products that take into account the waterproof quality and ensure the follow-up construction effect. The coating film has good flexibility and can effectively avoid cracking and leakage.

Second, look at the product type and choose products with good adaptability.

Make specific choices for different decoration environments, and choose suitable products to make the decoration effect better and more perfect. It is also a rich product system, with 300 general series, 400 flexible series, 500 super flexible series and 600 elastic series. Each series of products adheres to the consistent high standards of Meichao, and there are more classic blue styles of Meichao, which effectively avoid missing brushes and make waterproof construction pleasing to the eye.

In short, if the kitchen and bathroom waterproof materials are selected correctly, the waterproof will win at the starting point. The quality of Meichaofang water solid products can be seen, and the environmental protection is also leading, so it must be a reliable choice!

Choose waterproof coating instead of waterproofing membrane for kitchen and bathroom waterproofing. Because the kitchen and bathroom area is small, there are many pipes, and it is not easy to construct, a continuous and complete waterproof layer is required to ensure the waterproof effect, and the waterproof coating can achieve this. There are also many waterproof coating products on the market, and I recommend Meichao's Fang Shuigu, which has obvious advantages:

1.Durable and not easy to crack. The flexibility of the water-solid coating film is very good, not easy to crack and seepage, and it is very suitable for places with complex structures such as kitchens and bathrooms;

2.The product system is rich. According to the decoration needs, Meichaofang Water Solid is subdivided into four series of products: 300, 400, 500 and 600, which are suitable for waterproofing in different environments.

3.Excellent environmental friendliness. As far as I know, the full range of products of Meichaofang water solid products have passed the highest standards of the world's four strict environmental protection certifications:

UL Green Guard [Gold] certification in the United States, Eurofins IAC [Gold] certification in Europe, GEV [EC1Plus] certification in Germany and [A+] standard in France, which is safe and environmentally friendly.

In short, products with excellent performance and environmental protection like Fang Shuigu can avoid a lot of risks for our kitchen and bathroom waterproofing.

When choosing waterproof products, we should pay attention to the following points:

1.The base layer of the waterproof product should be firmly combined, and there should be no cracks, blistering and falling off.

2.Waterproof products should have high flexibility and easy film formation, so as to eliminate problems such as how to better adapt to the deformation of the base layer.

If you want to do high-quality waterproofing, I personally recommend Meichaofang water solid products. The praise of this product in the industry is still quite high, and Meichaofang Water Solid has also passed the world's four strict environmental protection certifications, and the product strength is very strong, so you can use it with confidence.

Finally, I would like to remind you that the kitchen and bathroom waterproofing must be done well, otherwise it will seriously affect the aesthetics and use experience of the kitchen and bathroom decoration.

Generally, the kitchen will be waterproof when decorating, but the waterproof materials that can be used in different parts are also different. For example, the waterproof coating used for indoor waterproofing in the kitchen is usually called flexible waterproofing, which has the advantage of being able to take care of all corners and quickly form a film. Moreover, the kitchen wall does not need to be waterproof as a whole, only the wall needs to be 30 cm high from the ground.

Therefore, the general kitchen wall leakage is caused by the waterproof paint is not brushed in place, or the wall water pipe is leaking. If you want to repair it, you need to open the kitchen wall to expose the leaking water pipe, and after the water pipe problem is solved, then re-plaster and level it for waterproofing and restoration tiling. Here, it is better to repair kitchen leaks or waterproof with paint.

Waterproof coating is a suitable waterproof material for repairing kitchen wall leakage, because waterproof coating is quick and easy to apply, and it is especially suitable for local leakage repairs that require quick completion. And you only need to simply brush two layers of paint, and when it dries, it will form a layer of waterproof film, the thickness is very thin, and it will not affect the effect of plastering and leveling in the later stage, restoring the effect of projects such as wall tiles.

Of course, in addition to the waterproof coating can be used for the repair of kitchen wall leakage, waterproofing membrane is also a very good option. If the maintenance area is small, the difficulty of construction with waterproof membrane will increase, if the kitchen wall and the ground are redone with waterproofing, the effect of using membrane is also good, but the membrane is relatively fragile and easy to be scratched by construction slag, so the construction should be very careful, and we must pay attention to maintaining the dryness of the construction base, otherwise it will affect the final waterproof effect.

Waterproof characteristics and material selection standards for kitchen and bathroom rooms:

1. There are many nodes at the root of the pipe, and it is easy to cause cracking and leakage due to the different expansion and contraction rates of different materials, as well as the vibration reasons such as flowing water in the pipe. Therefore, the waterproofing material must be elastic and not afraid of cracking.

2. There are many yin and yang angles, and if the waterproof material is not pasted, it is easy to cause hollowing and form a hidden danger of leakage. Therefore, if you choose the waterproof material of the membrane material, you need to be light and thin, which can be well adapted to the treatment of yin and yang angles.

3. The ground is soaked in water for a long time, and the waterproof material is required to have good water resistance.

4. There is often water on the wall of the kitchen and bathroom, which needs to be waterproof and moisture-proof.

Therefore, the selection of waterproof materials in the kitchen and bathroom needs to pay attention to the material's crack resistance, adhesion ability, water resistance, and environmental protection. No envy.

Toilets are used very frequently, and people need to use them at least 5-6 times a day. Therefore, when decorating the bathroom, everyone will pay special attention to the waterproof treatment of the wall to avoid problems that affect the normal life of themselves and their families in the future. Do you know the steps of bathroom waterproofing construction?

Next, I will tell you about the steps of bathroom waterproof construction and what kind of bathroom waterproof material is good. Before waterproofing the bathroom, first make sure that the bathroom environment is dry and clean. The entire bathroom must be coated with waterproof coating, without omission, and firmly combined with the base, and there must be no falling off, bubbles, cracks and other phenomena.

The thickness of the coating should be in accordance with the standards specified by the product, while maintaining the consistency of the coating height. After the first layer of waterproof coating is dried, when brushing the second layer of waterproof coating, pay attention to maintaining a certain time interval with the first layer of waterproof coating, not too short, otherwise it will affect the waterproof effect, and the specific time is determined according to the requirements of coating construction. In order not to damage the waterproof layer in the subsequent construction, the waterproof layer should be coated with a protective layer, and the protective layer should be completely covered with the waterproof layer.

When applying the protective layer, there should be no falling off, bubbles, cracks, etc. Do a closed water test. During this process, the water on top of the ground should be less than 2 cm and the test time should be more than 24 hours.

If there is no leakage, it is qualified. However, if there is leakage, it should be re-waterproofed. Don't be careless when testing closed water.

Polyurethane waterproofing material has good adhesion and good adhesion when applied to walls. After all, the environment of the toilet itself is very humid. If the waterproof material used has poor adhesion, it is easy to leak water during use.

However, the aesthetics and smell of polyurethane waterproof materials are poor, and they are not environmentally friendly. Acrylic waterproof material has good ductility, excellent weather resistance and alkali resistance, convenient construction, moderate, will not affect the aesthetics of the whole space, and can be used as a waterproof material for toilets. Polymer cement shatterproof materials are non-toxic and odorless, and are very environmentally friendly.

After sticking to the wall, it dries quickly, adheres firmly to the base surface, has good air permeability, and will not bulge. However, the construction is more troublesome, and it is necessary to put in the appropriate amount of powder and liquid materials according to the instructions, otherwise its performance will be affected.

Waterproof materials such as cement mortar are truly environmentally friendly, drying fast and setting time short. In general, the steps of tiling can be carried out after two hours of construction. However, this waterproof material is not elastic after film formation, and is suitable for use in places with stable structures.

The above are the construction steps of bathroom waterproofing and what kind of good bathroom waterproof materials are used, I hope it will help you. When decorating the bathroom, be sure to do a good job of waterproofing, and the necessary places can be inlaid with each other.

During construction, you can hire some relevant staff to help you, and the waterproof material should also pay attention to the material. Choose some materials that are cost-effective. During construction, it is also necessary to pay attention to the close to the tiles, and at the same time to avoid some places that are easy to stain with oil.

When choosing a particularly good waterproof material, you should also pay attention to the overall design layout, and when installing, you should pay attention to the distribution of materials.

Generally, a layer of waterproof paint will be applied to the wall, or a layer of waterproof tiles will be hidden on the surface, or a layer of waterproof material will be pasted to do a good job of waterproofing.

The decoration of the new house should be planned for the future daily life, and the selection of unsuitable waterproof materials in order to save the budget will lead to water seepage and water leakage problems, which will affect the quality of living.

1.When purchasing, first look at the scope of application of the product manual, choose a certain type of product in combination with the environment and needs of decoration, and choose waterproof materials with better product quality and environmental protection performance as much as possible;

2.When the budget is sufficient, choosing branded products as much as possible can greatly reduce the cost of our trial and error;

3.The choice of environmentally friendly waterproof materials is particularly important, the relevant third-party authority authorized to use a variety of quality certification marks and environmental certification marks, I recommend Meichaofang water solid, after learning that all products have passed the world's four strict environmental protection certifications, can make our living environment more at ease.