Why is the network not good at night, and what should I do if the wireless network signal is not goo

Regardless of whether you go online during the day or at night, there is no absolute good or absolute bad, and you can only say in a broad sense that you should try to go as little as possible at night, for the following reasons:

First, the light is dim at night, which is not good for the eyes;

Second, the time spent on the Internet will be too fast, which will affect the rest time;

Third, long-term exposure to the computer will affect eyesight.

In the case that the computer, the cat, and the line are normal, the size of the network speed depends on the following aspects:

1.The bandwidth of the route you use to access the Internet. The trillions that people often talk about refer to it.

2.The configuration of your computer or the quality of your computer's operating system. Generally, the configuration of the computer does not affect the network speed, if the configuration is too low, too many programs or software will be affected.

3.The rate at which your data port allows. Some may limit the port rate in order for everyone to be in a timely manner. At this time, no matter how large your bandwidth and high computer configuration are, it is useless.

5.The number of users connected to the network by local nodes means that everyone is slow when they are using the network, and fast when there are few people. Generally slower from late to o'clock.

6.The computer may have a virus.

If you are using a Huawei phone and the signal is weak after connecting to Wi-Fi, you can use the following methods to troubleshoot the problem:

1.It is recommended that you check whether the mobile phone uses a metal protective case, magnetic protective case, magnetic bracket or magnetic chuck, it is recommended to remove it, metal and magnetic materials are easy to interfere with the signal, resulting in poor mobile phone signal.

2.It is recommended that you move to an area with strong signal coverage on the router, as it will affect the signal if it is blocked or far away from the router.

3.It is recommended that you restart the router to see if the signal returns to normal.

If the wireless network signal is not good every night, you can suggest that the mobile or telecom company send maintenance personnel to repair it.

There is no other way. There are more people using the Internet at night, and the lines are naturally congested, so you can apply for a higher broadband network.

The wireless network has a bad signal at night, and it depends on two parts. The first is the equipment problem of broadband operators, there are many users at night, resulting in insufficient bandwidth. There are too many people logging in to the wireless router, ****, etc., resulting in insufficient bandwidth.

Episode 24 What should I do if the mobile phone Internet signal is not good?

Although it sounds relatively simple to restart first if there is a problem, generally speaking, most software problems can be solved in this way, and this is also the most convenient way, there is no one If the problem of poor signal is only encountered by your own mobile phone, then restart the phone.

Update router firmware Updating the firmware of a router is often easy to ignore, in fact, the new version of the firmware often improves the signal, performance, stability, etc., the specific way is to go to the official **** to upgrade the software, and then open the router management interface.

Nowadays, the vast majority of people have installed wireless routers in their homes to provide wireless wifi Internet access.

This phenomenon arises from three reasons: First, the responsibility of the operator (failure of transmission and switching networks).

Operators must ensure that the signal quality to the user (bandwidth, bit error rate, signal-to-noise ratio, transmission rate, signal level, input and output impedance, signal stability, input and output impedance stability) in line with national standards); Specific**: Telecom 10000 Netcom 10060 Tietong.

The other ** is very good, and a certain ** is particularly bad, which is the problem of ** itself, and has nothing to do with the operator and the user. Copyright Statement: This answer is harmonious and original, and no one may steal it!

Three: the user (responsibility) The following factors will lead to your current state, if there is no problem with the above-mentioned operators after testing, the next is your user's own problem; If you don't have the following problems, you can directly call the operator** and ask the operator to deal with the operator's own related matters. Copyright Notice:

This answer is original and original and must not be stolen by anyone! The cause and treatment of this phenomenon by the user are under the premise that the user's device settings must be correct: 1:

Power supply with a multimeter.

Check if the power supply is stable? Are AC voltage fluctuations within the allowable range? Is it more than 5% of the rated voltage?

Is the ripple coefficient (checked with a millivoltmeter) acceptable after the power supply is converted? Is the temperature rise of the power supply abnormal? Do the voltage regulation characteristics meet the specifications?

Do the voltage regulation characteristics and ripple coefficient meet the technical specifications under rated load? When replacing a large fan, is your power capacity up to the requirements? The power supply of general auxiliary equipment (routers, network switches, cats, etc.) is a rectifier power supply, without voltage stabilization function, with a large ripple coefficient (which may be caused by the drying up of the filter capacitor), and the load capacity is also poor; Fever.

As a result, the equipment does not work, and special attention should be paid to monitoring during operation. Due to the overvoltage of the equipment (like feeding a child, more can hold up) and low voltage (like feeding a child, less will cause malnutrition.

Excessive voltage fluctuation (such as feeding children, hungry and full meals), overcurrent, heating, resulting in overheating protection action to cut out of fault and exit the equipment from operation (i.e., slow, delayed, repeated start, delay, disconnection, disconnection, automatic shutdown, crash and other appearances), etc.; Is the overcurrent protection and overtemperature protection of the power supply operating correctly? Is the movement sensitive?

2: Check the network cable and crystal head (R45): whether the crystal head and the socket are plugged in (loose)?

Is the contact good? What is the contact resistance? Is there any dirt accumulation?

Is it oxidized? Is the mechanical latching of the crystal head and seat locked? Is the latch secure?

Is the network cable and the plug pressed tightly and in good contact? The inter-line insulation resistance of network cables.

I use a 100V shake meter.

There are many factors that determine the slow network at home, involving terminals, lines, equipment and other aspects.

1. The network itself is a problem, the server bandwidth is insufficient or the load is too large.

2. Network cable, optical fiber problem, network cable connector loose or network cable quality is not good, the crystal head should be compacted, if there is a problem, directly change the crystal head to do it again, the optical fiber bend is incorrect (optical fiber, leather cable should not turn straight), the optical fiber adapter socket is loose or dusty (unplug and wipe with alcohol), resulting in poor contact and large attenuation.

3. Terminal equipment problems, the optical modem or router is not ventilated, the power is not interrupted for a long time, the router is overheated for a long time, and the quality of the router is not good, resulting in slow network speed.

4. Problems with mobile phones and computers, mobile phones and computers have been used for a long time, the memory occupies a large amount, the response is slow, the reception network signal is poor, and the mobile phone or computer is cleaned up.

5. Operator problems, the general operator to the user is a secondary splitter, and now the operator purchases the splitter with low pressure, resulting in poor quality, long time, plus dust and other factors caused by attenuation and larger, the network can be connected, and the Internet is slow or unusable.

The network is not good, first of all, you need to check the problem on the side of the business, you can call **consultation, such as the mobile can dial 10086, and you can also test how many megabytes the network is on the computer. If everything is fine, then restart the router at home.

If the internet is not good every morning, it means that there are too many people using mobile data in the local area, or there are people playing games on broadband.

It may be a problem with the network cable and optical fiber, the network cable connector is loose or the quality of the network cable is not good, the crystal head should be compacted, and if there is a problem, the crystal head should be changed and redone, the optical fiber bend is incorrect (optical fiber, leather cable should not turn straight), the optical fiber adapter socket is loose or dusty (unplugged and wiped with alcohol), resulting in poor contact and large attenuation.

If the network is not good every morning, it may be a problem with your network router or cat. Restart and then turn it back on again to see if it might get better.

Every morning the network is not good, it may be a problem with the connection, just start it again.

The network is not good every morning, what's going on? If the Internet speed is slow, the first thing to check is the line, is the plug not plugged in properly? Is there any looseness? It's still a problem with the cat, if these are all right, you have to shut down and restart.

If the network is fine, you can restart the router, or restart the phone, and the network should be better.

Check the network connection to make sure the router and the cat are working properly!

Because there are a lot of people, because after a night's rest, they get up in the morning and open their eyes to look at their mobile phones as soon as possible.

What's wrong with bad internet every morning? Do you see if it's a problem with your wireless router? You can turn off the router and restart it or restart the phone, it may be too long and you need to lose power.

What's wrong with bad internet every morning? There are two reasons why my mobile phone has a bad network, one is that I don't have a good Internet connection, and now it's fine.

This is not necessarily, it mainly depends on what the network is in your area? If only your home network is poor, it is recommended that you call ** to the mobile or telecom company.

Very good! Because of ignorance, I can go online and be more able to enrich and strengthen myself.

The internet speed is not good and the phone is too much junk and you can deal with it from these two aspects.

1. First of all, turn on the use of the signal detection tool, you can see the wifi signal distribution very intuitively, the current connection "home", you can see that the channel used is "4".

2. Enter the router, click "Running Status" on the left side, and the current WiFi information displayed on the right can clearly see that the current channel is "11".

3. Return to the tool interface again, and you can see a histogram in the upper right position, which clearly shows the current channel and the channel occupied by other routers around it.

4. The longer and red the red bar, the worse the surrounding network environment under the channel, which is not conducive to the transmission of wireless signals.

5. Next, you need to choose the cleanest channel as the channel for wireless propagation, which can make the signal sent by the router stable and efficient, and you can see that "4", "5", "12", "13", and "14" are all unused.

6. Try to select the middle channel, here preferably "4", after the channel is selected, enter the router again to modify the channel.

7. Click "Wireless Settings" on the left navigation bar, then click "Basic Settings", pull down the "Channel" option box under the "Basic Wireless Network Settings" column on the right, modify it to "4" and click Save.

8. After saving, you need to restart the router, and click "Restart" according to the prompts.

Summary. Hello, it can be used during the day, and it may not be used at night, and there may be several situations.

1. Problems with the computer itself, network card problems, driver drops, or network cable problems, routers, etc., which cause you to be unable to access the Internet, eliminate them one by one.

Second, the virus in the computer, IE is maliciously modified, IE error, etc., can be disinfected, and repaired with Huangshan IE repair.

3. If the packet is lost, there may be a problem with the crystal head, redo the crystal head.

Fourth, if DHCP is not enabled for routing, the IP address cannot be obtained, the network is restricted, or someone in the same network uses an executive officer to cause interference.

6. QQ and other instant messaging software can be logged in, or you don't open the web page, it may be that the DNS is not set up, please set it according to the public DNS address where the local area is located.

7. If you cannot access the Internet due to system damage, please reinstall or restore the system.

9. Router, if the cat is overheated, please turn off the power for 15 minutes and then turn it back on. Hope it helps.

Why is there a network during the day and no network at night.

Please wait. How to say.

Hello, it can be used during the day, and it may not be used at night, and there may be several situations.

1. Problems with the computer itself, network card problems, driving out of Qi Xuanqing, or network cable problems, routers, etc., which cause you to be unable to access the Internet, eliminate them one by one. Second, the virus in the computer, IE is maliciously modified, IE error, etc., can be disinfected, and repaired with Huangshan IE repair. 3. If the packet is lost, there may be a problem with the crystal head, redo the crystal head.

Fourth, if DHCP is not enabled for routing, the IP address cannot be obtained, the network is restricted, or someone in the same network uses an executive officer to cause interference. 5. The network speed is slow, it may be poisoned, or someone in the same network is seriously occupying resources, such as bt, **, etc. 6. QQ and other instant messaging software can be logged in, or you don't open the web page, it may be that the DNS is not set up, please set it according to the public DNS address where the local area is located.

7. If you cannot access the Internet due to system damage, please reinstall or restore the system. 8. After connecting to the Internet, you just can't open the web page, there may be a problem with the network signal, please contact the local broadband access department Gao Lu Liu to check. 9. Router, if the cat is overheated, please turn off the power for 15 minutes and turn it on again after the clock.

Hope it helps.

It's not a computer, it's a mobile phone, and you can't watch a TV, so it's okay to use it during the day.

That's it. Hello, it could be a problem with your router. It may be set for a limited time. Hope it helps.

You can watch a lot of TV during the day, and you can also use your mobile phone to surf the Internet, but you can't use the network at night.

Hello, this one could be an issue with your router settings. I recommend that you check it out.