How can fire engineers prepare for the exam better?

Hello, we are happy to answer your questions.

With 32 days left until the exam, you can:

Practice a lot and be able to answer questions (October).

The fire exam questions are flexible, which requires us to practice more before the exam, simulate more + do real questions. At this stage of practice, don't look for some basic chapters and fill-in-the-blank multiple-choice questions, choose a certain depth and a set of mock questions, conduct mock exams according to the requirements of the exam time, and carefully analyze the wrong questions after each set of questions, so as to draw inferences from one another. You can also take out the past year's past papers and do them carefully, and be familiar with the question type, difficulty and ideas of the past questions.

Prepare and answer the past questions (November).

Before the test, plan and arrange the place to eat and lodging, prepare the tools and admission ticket, and calculate the distance and departure time of the test room. I can't understand people who are late for the exam, I can only think that you didn't study well enough, and the exam is just to feel the atmosphere and question type of the exam. Otherwise, how could he be so irresponsible to himself, usually studying hard day and night, fighting for hundreds of days, and pinching this time after the exam.

The night before the exam, be sure to verify whether you have all the required things such as ID card, admission ticket, test center, 2B pencil, eraser, watch, etc. (it is recommended that you buy a mechanical watch during the exam, **You can buy one for more than 20 yuan, it is very important to master the time during the exam, especially the case). Check again before going out in the morning, send the test papers and answer sheets, don't rush to do the questions, fill in the exam information (name, admission ticket, etc.) first. Relax and answer questions without being influenced by other circumstances.

Finally, I wish you all the best of luck in passing the exam.

<> the textbook of the 2018 first-class fire engineer has not yet been published, at present, you can continue to use the 2017 textbook for review, after the publication of the new textbook, you should update the textbook in time or pay attention to the changes in the textbook, if you wait until the new textbook is published and then start to review the fire exam, then the time is a bit tight.

If you sign up for a course to learn from the teacher, it is more targeted, especially the fire test points, if you read the book yourself, you don't know which are the important test points, which are the required test points, which test points can be connected to memorize, there is no pertinence, for the first exam has no foundation for students, this will waste a lot of time, and it is difficult to have an effect on the review. If you have a foundation and have more time and energy, it is not much of a problem to choose self-study.

Here are a few review suggestions:

1.When the new textbook comes out, combine your time and syllabus requirements, make a preparation plan, set yourself the necessary study time every day, create a good learning atmosphere, and know which period of time you are most likely to absorb and digest. For the first time, you should first focus on the textbook, understand the coverage of the test center and the type of test questions, and read the textbook at least once.

This saves time and energy, and the difficult points will be more intuitive to learn.

2.We must grasp the three textbooks, which also focus on technical practice. The knowledge system of fire protection is very coherent, and the technical practice is half the success.

It is recommended that you start to prepare from now on, according to your own situation, you must have your own study plan, before the end of May, at least ensure that the textbook has been read more than three times, do not look at the specifications and atlases too early, there is no certain amount of knowledge reserves, the norms will only play a counterproductive role. When you close the book and be able to say the chapter table of contents fluently (not to memorize the chapter table of contents, so that there is no point at all, but to say that you have read more books, close your eyes and naturally know the order of the content of each book), you can move on to the next step of learning.

3.Building on the previous article, start learning the norms. Among them, the "Building Regulations", "Water Regulations", "Fire Regulations", "Self-spraying Regulations" and "Fire Extinguisher Specifications" are the key objects to be mastered, and the "Construction Regulations" and "Water Regulations" are recommended to cooperate with the corresponding atlases to deepen understanding.

Similarly, the specification needs to be taken out every once in a while to re-read and memorize. This will make the sprints that follow easy.

1. Regular learning status.

Maintaining a regular study state before the exam is crucial to pass the exam, which requires candidates to spend about three hours a day on revision, focusing on the high-frequency test points of each subject and the knowledge points of fire engineers that have been published over the years. And pinch the points to do the fire engineer past questions, and study the knowledge points in the past questions. The mistakes accumulated in the past should be reviewed regularly, and the combination of the three should be gradually cycled to gradually advance the learning progress.

2. Upward psychological state.

Mood directly affects the state of learning, many candidates are prone to anxiety before the exam, and the questions cannot be done, the book cannot be read, and the precious preparation time is wasted. In order to improve the efficiency of review and preparation, candidates need to maintain a positive learning attitude, face various problems in preparation with an invincible mentality, and overcome the problems one by one.

3. Healthy physical condition.

Preparing for the fire engineer exam is a mental and physical thing, as the so-called body is the capital of the revolution, it is important to maintain a healthy physical condition before the exam.

Some candidates are accustomed to raiding before the exam, reading at night in the last few days, sleeping only three or four hours a day, and studying for a long time is easy to produce brain fatigue, which is not only not conducive to preparing for the exam but will affect the development of normal work and life. Therefore, candidates should try to ensure 7-8 hours of sleep and maintain a healthy body to meet the exam.

Only with a good study, physical and mental state can you avoid worries and go all out to sprint for the exam.

First: make a study plan.

People are inert, making plans, making detailed plans to the day, can help you overcome a little laziness, is very helpful for learning, when a period of time, the formation of habits, then learning will be very smooth.

Let's talk about why the review time is set at 5 or 6 months, because the time is tight and the task is heavy!

There are a lot of regulations and data that need to be memorized in three books, practical and comprehensive, and finally you need to review and consolidate the exercises, so don't take a long review time, so don't think about passing the exam at one time.

Daily reading volume: because the three textbooks of fire protection are a bit similar to the trinity, how to say, that is, practice and synthesis are similar to the basics, and they are scattered knowledge points, so the case analysis is to summarize the knowledge points of the two books together, so as long as the practice and synthesis are hard enough, then the case analysis is also won in minutes.

So when reading books, the main focus is on two books, according to statistics, the two books have a total of ten articles and 67 chapters, and you can read them once a month, so you have to read at least three chapters a day, and if you want to consider the time of normal social delays, then you have to read four chapters a day.

Textbook selection issues.

The textbooks mainly include "Fire Safety Technical Practice", "Fire Safety Comprehensive Ability", "Fire Safety Case Analysis" + Specification + Atlas.

Textbooks are enough as long as the official textbooks issued by the state, you don't need to buy paper versions, you can use e-books, as long as you don't buy some shoddy textbooks, and moreover, only one set of reference books is enough, don't buy too much.

Too many reference books and too many miscellaneous will only distract attention and waste energy. Identify a set of books, and then study around this set of textbooks, as long as you study thoroughly, you will be one step closer to success. The so-called ever-changing is inseparable, the knowledge points are fixed, and the reference books will be taken into account, so don't care about anything else, just get the reference books done first.

Some people say that you can't buy it, because it's all in the textbooks, and it's useless to buy it.

Another reason is that the specification can also be used as an auxiliary textbook, which is very good for memorizing data!

Actually, this is not advisable.

**Analysis is to read in the case of a foundation, only to understand the textbook, and then read**, so that when you look at it, you will have a feeling of sudden enlightenment, why you, because**analysis is similar to answering doubts, or the existence of a teacher.

After you read the textbook, there must be something that you can't do, or your understanding is biased, then, you look at the **, and then you will understand the joints, and you will deepen the impression. Therefore, ** is not for you to be a basic general view, but as a teacher to answer questions.

I hope that the exam 100 can help all candidates, avoid detours on the road to the exam, make use of the trivial time, and strive to clear the customs at one time.