What is the difference between a copper door and a real copper door

Look at the cross-section of the copper door, the real copper door is made of pure copper plate, and the imitation copper door is made of stainless steel copper plating, and the two have an essential difference. The most direct and ruthless method is to rub a section at the bottom of the copper door with a file before the installation of the copper door. Otherwise, it is a real bronze door.

In addition, to have an understanding of the copper door, too cheap is often imitation copper door, do not be greedy for cheap and fall into the trap of bad manufacturers.

Jinlai shield, the copper door is divided into real copper door and imitation copper door, the real copper door is the outer finish is pure copper plate, and the outer finish of the imitation copper door is stainless steel copper-plated plate or composite copper door; However, the inner skeleton is all hot-dip galvanized square tubes, and the inner filling is aluminum honeycomb.

The inside of the steel and copper door is a steel structure skeleton, and the outside is wrapped with processed copper panel profiles. The bronze door used for the outer eaves of the courtyard is larger, graceful and luxurious, and although the door of the ordinary apartment is slightly smaller, it is also rich and noble, and the taste is good.

1. Nearly ten colors of modern brushed copper doors can be made. The inside of the copper door is a steel structure skeleton, and the outside is wrapped with processed copper panel profiles. T2 copper strip that is easy to bend and plastic, not easy to crack, is a very good profile for copper door panels, and is used more in copper doors.

2. Although copper is an anti-corrosion material, copper doors are often further anti-corrosive in the production. For example, the surface is first drawn, and then the surface is cleaned and passivated several times to block the contact between the surface of the panel profile and the corrosive material to maintain the original color of the copper.

3. Next, no less than two phosphating treatments are carried out to form a protective film on the surface, and then it will go through the steps of spraying protective paint, Tongling 1600 degrees Celsius baking, natural cooling, etc., and the finished copper door can be finally completed. As for the steel skeleton in the door, it is hot-dip galvanized, and then the copper structure is welded and installed. Like other material doors, copper doors should also be customized, and after the workers conduct on-site surveys to determine the detailed size, they will go back to the material according to the relevant data and graphics, and then come to install.

Summary. Dear, I'm honored to have your question The information that the teacher found for you here is: the difference between copper-plated doors and pure copper doors.

The craftsmanship of the pure copper door is very exquisite. Naturally, this also forces copper door manufacturers to spend the most energy on product quality and service life. It is even necessary to give more consideration to the characteristics of the regional climate and make a slight structural adjustment.

The copper-plated door is plated with a layer of copper foil on a stainless steel or zinc alloy plate through an electroplating process.

The difference between a copper-plated door and a pure copper door.

Dear, I'm honored to have your question The information that the teacher found for you here is: the difference between copper-plated doors and pure copper doors: the craftsmanship of pure copper doors is very exquisite.

Naturally, this also forces copper door manufacturers to spend the most energy on product quality and service life. It is even necessary to give more consideration to the characteristics of the regional climate and make a slight structural adjustment. The copper-plated door is plated with a layer of copper foil on a stainless steel or zinc alloy plate through an electroplating process.

The above is the full <> of the teacher's reply

2.Have more questions? The teacher can continue to answer your <>

Looking forward to serving you again <>

I wish you a happy life and all the best! 4.If you are satisfied with my service, please give a thumbs up and wish you all the best again! Peace and joy <>

<> precautions: <> pro

Now that the epidemic is repeated, you must pay attention to safety when you go out, yo <>

Wear a mask when you go out, wash your hands frequently! Have a great day, <>

No.

The copper content of the real copper door is not 100%, but it is extremely close to 100%.

The copper content of the real copper door can reach more than 99%, for example, the copper door of Jingongcheng is made of Luoyang copper plate with a copper content of more than 99%, which is more graded, more durable, and has renovation value.

Tips for distinguishing real and fake copper doors:

First, the door frame: the copper door frame copper plate can be crushed by folding the double knife, so that people can see that it is very thick, but those who understand it are clear at a glance, because there is an arc on the side of the two layers of copper plates stacked together, and the edge of the real single-layer copper plate is at a 90-degree right angle, in addition, the phenomenon of external thickness and internal thinness can be clearly seen on the splicing angle.

Second, look at the paint and lines: the paint of the copper door is not bright enough and can easily be powdered by ultraviolet rays and wind and rain. The fake copper door is sprayed with black wire, while the real copper door is sprayed with imported black gold wire.

It goes without saying whether the chosen material is good or bad. In contrast, the texture of a true copper door is clearer and more intuitive.

The third look at the color: the fake copper door is only mixed with some copper powder in a smooth plastic powder, and electrostatic spraying is carried out to reduce the adhesion with the plate, which will wipe off the metal, so the metallic feeling is not strong and the color is uneven. The real copper door is sprayed with anti-ultraviolet acrylic high-thickness resistant paint blended with a lot of copper powder, with a strong metallic sense and uniform color.

Enter the area and get the decoration for free**].

With the development of the times, the decoration of houses has become more and more high-end. Just like when many people choose doors and windows, they will not choose traditional iron doors and windows like in the past, but will choose some different materials as doors and windows. For example, steel and copper doors and pure copper doors are very popular.

So what is the difference between steel copper doors and pure copper doors? Next, let me lead you to solve this merger problem together. 1. The difference between steel and copper doors and pure copper doors Pure copper doors refer to copper doors with high copper content.

The general production process is not often excellent, and the performance in anti-theft is also excellent, and the high-end atmosphere is very face-saving. It is a popular material for doors and windows in recent years. However, the high copper content makes it not cheap.

At this time, many people will take a step back and choose a material that looks similar to that of a pure copper door. Imitation copper doors are similar substitutes, and steel copper doors also belong to imitation copper doors. There is a layer of copper film on the surface of the steel cylinders, and the hardness of the keel structure inside is not the same as that of the pure copper door, and the main material is steel but there is only a small amount of copper on the surface, that is to say, the copper content of the pure copper door is higher than that of the steel copper door.

Second, the advantages of steel copper door and pure copper door The pure copper door has obvious patterns, beautiful appearance and excellent performance. It has good stability, corrosion resistance, excellent thermal insulation and sound insulation. It has very few internal impurities and is highly uniform.

The color looks very pleasant, does not cause harm to the human eye, and also supports the health of the human body, such as absorbing harmful light. The steel and copper door adopts advanced science and technology to do some special treatment to meet people's needs, similar to doing the old and antique. It is very malleable and very easy to handle.

It can be used in a variety of situations and is often used in some special environments. It has a very long service life and excellent oxidation resistance. Summary:

Steel copper door and pure copper door are two materials, each with its own advantages. We need to choose according to our own needs. We have to think about color, durability, longevity, etc.

Don't blindly follow trends. To buy is to buy something that truly meets your own desires and needs. There is only the most suitable material for yourself, there is no best material, I hope you can buy the right copper door material.

Do the math how much it will cost you to renovate your home

The material of the pure copper door is the same inside and outside.

The bronze door is deeply loved by people, and it has a lot to do with its exquisite decorations, which are all copper vertical chain digital arts. As an ancient art, copper art is mainly used on pure copper doors, mainly through some relief, hollowing, forging and other patterns and auspicious patterns. The animals that are more classic than the rest are dragons, tigers, phoenixes, turtles, lions, unicorns, deer, cranes, mandarin ducks and other flowers and plants.

Or text decoration abstract patterns complement each other, placing people to ward off evil spirits, ward off evil spirits, and pray for blessings. In addition, the detailed carvings on some European-style bronzes also draw on Western architectural decorative elements, such as the Doric pre-calling, Ionic style, Corinthian style, Taskan style, composite style and other classical Greek and Roman column styles on both sides of pure copper, which makes the overall feeling gorgeous and atmospheric.

Basic Information. As the production process that inevitably occurs in the production process of the copper door, the drilling process will definitely leave the drill dirt on the copper door, because the existence of the drill stain does not affect the normal use of the copper door, and the impact on the aesthetics of the copper door is relatively small, so it often does not get the attention of the user, which leads to a series of problems.

Copper is an extremely stable metal, and the manufacturing process of copper doors often requires the use of drill bits with a speed of 16 to 180,000 times per minute. The hole walls of the drilled holes are often made of epoxy glass substrate, which is not a good conductor. The high temperatures during the drilling process tend to leave drill stains on the surface due to the presence of epoxy glass substrates.