How to choose hardwood flooring? How to choose hardwood flooring

Jiusheng is made of pure solid wood, with high stability and durability We bought this from several households in the same corridor.

Choosing a solid wood floor can look at the following points, paint the surface.

Whether it is a bright or matte paint floor, the selection should be based on whether the paint mold on the surface of the paint board is uniform, plump, smooth and delicate, whether there is paint leakage, bubbling, holes, and another important indicator is the wear resistance of the paint film. For example, the painting process of natural flooring is in a leading position in the industry, and the surface of the floor adopts its unique high-pressure painting technology, and the service life is twice that of ordinary flooring. At the same time, the wear resistance of nature's paint surface exceeds that of its peers by more than 4 times.

Back paint: Good floor to look at both sides. Good brand products can make the paint sealing rate on the back of the solid wood floor high, which can effectively prevent moisture from penetrating into the floor from the back, and have a good anti-deformation effect. The back of the natural wood floor is made of active ecological paint with special moisture-proof and mildew-proof treatment.

Due to the wide variety of tree species, the variety of wood ** varies greatly.

In the cost composition of the floor, the selection of materials occupies a large part, and the grades are different. Unscrupulous traders may use fast-growing forest species as valuable species. Therefore, the selection of wood species should be based on national standards rather than market standards.

In terms of specifications, the larger the size, the more expensive it is. When consumers buy flooring, they should consider the comprehensive quality of the floor and choose the most cost-effective one in their minds.

Dry control technology. In addition to the inherent thermal expansion and cold contraction characteristics of the object, wood also has the characteristics of wet expansion and dry contraction. Therefore, the drying process in the production process of wood flooring is an extremely important process, and the quality of the treatment has a great impact on the quality of the floor. For example, the natural floor is dried and steamed by computer high-temperature steam for 720 hours to completely remove the moisture of the board to ensure that the treated board does not attract insects and mosquitoes and absorbs moisture and discharges moisture.

How to choose solid wood flooring? 1. Moisture content, moisture content is an important factor that directly affects the deformation and cracking of the floor, and the moisture content of the purchased floor must be consistent with the local equilibrium moisture content. It is generally stipulated that the moisture content of the floor is 7 12, not more than 14, and the inspection report must be seen clearly when purchasing.

If there is a condition to use the moisture content tester, the exhibition hall first measures the moisture content of the purchased varieties, and then unpacks the box to detect the moisture content of the purchased varieties of wood flooring, if the moisture content of the two is only 1 2 different, it is a qualified product. 2. Processing accuracy, assemble on the flat ground with several floors, touch and see whether the processing quality accuracy, finish is smooth and smooth, and whether the tenon, installation gap, anti-deformation groove and other assemblies are tight and tight. 3. The quality of the substrate, as for the natural texture of the wood, there is no need to be too strict about the small knots and color difference, which is the natural attribute of the wood, and it is the natural texture of the color difference and rich changes that shows the natural color of the solid wood floor.

The vast majority of them are chord sections, and a small number are radial sections, which are difficult to achieve in solid wood floors if they are all the same faces, unless they are planed veneers. Check the grade of the floor for defects such as insect eyes, cracks, decay, blue staining, and dead joints.

1. Determine the type of plank. When purchasing solid wood flooring, it is necessary to take into account the factors of the indoor environment, if the indoor humidity is relatively large, then it is necessary to choose white pine, red pine, catalpa wood flooring, these three kinds of wood are not easy to deform after being damp.

2. Determine the size. When purchasing solid wood flooring, in order to reduce deformation, the floor should be narrow rather than wide, and the size should be short rather than long. At the same time, it is also necessary to take into account the size of the floor, if the area is small, it is better to choose a small size wooden floor.

3. Observe the quality of paint. Nowadays, it is common to use UV lacquered floors, and there are types of glossy lacquer and matte lacquer. It should be observed whether the paint film is uniform, plump, smooth, no leakage, no bubbles, and no holes. It is best to seal the paint on six sides.

Solid wood flooring has the advantages of environmental protection, beauty, and comfortable feet; When choosing solid wood flooring, you need to pay attention to the appearance of the floor, the surface of the board should be smooth and smooth, wood defects, hardness, length, width and thickness, etc.

The appearance is intact and the flatness is good.

The length, width and thickness of a good floor are small, and the whole floor should be straight and neat. Appearance without scarring, insect eyes, repair holes.

Tongue and groove.

The error of tenon and tenon groove should be controlled below plus or minus millimeters.

The harder the density of the wood, the greater the strength, and the better the quality; The darker the color and the heavier the weight, the greater the density and the better the strength.

In addition to the properties of thermal expansion and cold contraction, dryness wood also has the properties of wet expansion and dry contraction. The moisture content of the solid wood floor should be controlled below 15%, otherwise there will be cracks or squeezing between the solid wood places in the case of moisture or dryness. When you buy it, you can feel it with your hands, and if you are professional, you can test it with a test instrument.

Length and width.

The shorter and narrower the solid wood floor, the more flat and firm it can be, and the long solid wood floor, about 2 meters long and 80 mm wide is the best. In addition, because the solid wood floor is too long and too wide, the dry shrinkage and humidity rise are large, and the solid wood floor is prone to warping and cracking.

Material color difference.

Different batches of wood come out after the material and color difference are different, in the purchase of solid wood should buy a few more pieces than the budget, otherwise the installation is prone to color difference, affecting the aesthetics.

In fact, I think that if you choose solid wood flooring, you should still choose a big brand** relatively high.

Solid wood flooring purchase skills:

1. Environmental protection level: pure solid wood flooring will not use glue in the production process.

2. Surface effect: you can choose according to personal preference.

And choose a child where to advertise, and then consult to know.

Solid wood flooring is the preferred material for floor laying in home decoration, when buying solid wood flooring, you must pay attention to the selection, below I will introduce you to the skills of choosing solid wood flooring, welcome to read.

Take a closer look at the texture of the wooden floor.

High-quality wood flooring, clear texture, beautiful and generous, if the texture is disorganized, very unpleasant, such wood flooring is often of average quality, and some are made of inferior wood.

Look at the color of the wooden floor.

The color of high-quality wood flooring is very natural, neither too dark nor too light, if the color of the wood floor is very heavy, it is likely that a layer of thick paint is deliberately painted to cover the color of the wood floor, such wood flooring should not be bought.

Look for cracks in the wooden floor.

It is normal for some wood floors below the mid-range to have subtle cracks, but not too much, normal cracks are between the textures of the wood floor, such cracks will not extend, and can be purchased and used. However, if the crack is very long, exceeding the texture of the wooden floor, it is easy to appear hidden dangers after a long time, so remember not to choose this.

Take a closer look at the cross-section of the wooden floor.

Through the cross-section of the wood floor to observe the worst, the general high-quality wood floor section of the wood fiber is delicate, very tight, this kind of wood floor is strong and durable, will not expand and deform due to moisture. The wood fibers with poor material properties are thick and very loose.

Look at the tightness of the wooden floor building.

When the wooden floor is laid, it should be very dense, and the large gap indicates that the quality of the wooden floor is problematic. When choosing wood flooring, try to piece multiple pieces of wood flooring together to see how well they seal and whether they fit perfectly.

Look at the paint quality and paint process of the wooden floor.

When choosing a wood floor, we should look at the quality of the paint surface, the key is to look at the finish of the paint surface, and see if there are bubbles, paint leakage, etc. The paint surface should be uniform and flat, without bubbles, cracks, and paint leakage.