What is the reason why the air conditioner does not turn?

What is going on with the air conditioner outside unit not turning - control transformer damage What to do if the air conditioner outside unit does not turn: remove the transformer, measure the primary coil without resistance, the secondary resistance value is normal, obviously, the primary coil of the transformer has been damaged, after replacing a new transformer, connect the power supply, the power indicator light is on, and the machine is working normally. What is the reason why the air conditioner does not rotate - varistor breakdown damage What to do if the air conditioner does not rotate:

Open the shell of the machine to detect, found that the 5A fuse has been blackened, this situation is mostly caused by lightning strikes, here, comfort 100 network reminds customers that in the summer when thunderstorms occur, it is best to unplug the air conditioner power plug when the weather changes, so that unnecessary losses can be avoided. What to do if the air conditioner does not turn - condenser and evaporator What to do if the air conditioner does not turn: the evaporator and condenser of the air conditioner are dirty and blocked (such as catkins and dust), which will make the refrigeration effect significantly reduced, and even the phenomenon of non-refrigeration, this phenomenon is often thought by some users that it is a lack of fluorine, and some users often think that it is a lack of fluorine, so they will be sent to the repair department for repair, and users should pay attention to the regular cleaning and maintenance of the air conditioner.

What to do if the air conditioner does not rotate - the damage of the starting capacitor of the compressor What should I do if the air conditioner does not rotate: if a split air conditioner does not refrigerate after starting, the indoor and outdoor fans are rotating, but the compressor is not working, turn on the outdoor unit, measure 220V has reached the binding post, turn off the power supply, measure the resistance of the compressor winding is normal, the starting capacitor of the compressor has not been charged and discharged, obviously it has been opened, after replacing the starting capacitor, troubleshooting. What is going on when the air conditioner does not turn - the capacity of the air conditioner power cord is insufficient What should I do if the air conditioner does not turn outside:

The 220V power supply is normal before moving, and the voltage measured at the moment of compressor start is only about 150V, which is mostly due to the improper selection of the 220V power supply line, and the wire cross-section is thin. What to do if the air conditioner does not rotate, the above are the main reasons and solutions for the air conditioner not turning. In fact, the air conditioner is not installed once and for all, and consumers also need to clean and maintain it regularly during the later use process; Secondly, if the air conditioner fails, we can first conduct a simple investigation to understand the cause and severity of the faulty product, and then decide whether to find someone to repair it, which may also help you reduce a lot of expenses.

There are many reasons why the air conditioner does not rotate, among which the more common ones are:

1. Power supply problems, when the power supply is aging, short circuit or the plug is loose, the external unit of the air conditioner may not rotate.

2. Voltage problem, when the power supply voltage is unstable or the voltage is insufficient, it will also cause the external unit of the air conditioner to fail to operate normally.

3. The starting capacitor of the air conditioner compressor is faulty, resulting in the compressor not starting normally.

4. The computer board of the air conditioner is faulty, resulting in the air conditioner unit not being able to receive the operation instructions normally, resulting in the situation that the air conditioner does not rotate.

5. If the compressor or fan of the air conditioner is damaged, it will also cause the air conditioner to not be able to operate normally.

Common reasons why the air conditioner does not turn outside:

1. AC contactor damage: the power supply of the outdoor unit is disconnected, and a new contactor needs to be replaced;

2. It is also possible that the computer board failure and compressor failure may cause the external machine not to rotate, and it is necessary to disassemble the external machine for testing and maintenance.

Note: For your safety, it is recommended to contact the maintenance master for external maintenance.

If the air conditioner does not rotate, this may be caused by the following reasons:

1.Air conditioner power supply problem: If the power supply of the air conditioner is not properly powered, the external unit may not work. You can check that the power plug is securely plugged into the socket and make sure that there are no damaged parts of the power cord.

2.Air conditioner switch problem: If the air conditioner's switch is not working properly, the external unit may not start. You can check if the switch of the aircon is turned on correctly and make sure that there are no damaged parts of the switch.

3.Failure of the external unit of the air conditioner: If there is a fault inside the external unit of the air conditioner, it may cause the external unit to fail to work. In this case, it is recommended that you contact a professional for repair.

4.Air conditioner indoor unit failure: If the air conditioner indoor unit fails, it may cause the outdoor unit to fail to work. In this case, it is recommended that you contact a professional for repair.

5.Blocked condenser of the air conditioner: If the condenser of the air conditioner is blocked, it may cause the external unit to fail to work. In this case, it is recommended that you contact a professional shirt dealer for repair.

Hello dear! There may be several reasons why the air conditioner does not turn around:1

Power issues. First of all, you need to check whether the power socket of the external unit is in good contact and whether the power supply is normal. 2.

Control board failures. The external control board is responsible for controlling the start and stop of the air conditioner motor, and if the control board fails, the motor may not start. At this point, you need to replace the board that controls the board.

3.Motor failure. Motor damage is another common cause that usually causes the air conditioner to not work.

In this case, the faulty motor needs to be replaced. 4.The question of longevity.

The air conditioner has been working for a long time, and there may be problems because the life span has expired. In this case, the motor also needs to be replaced. 5.

Cleanliness issues. If there is too much dust or other items blocking the heat dissipation port, it will affect the heat dissipation effect, and even cause the air conditioner to overheat and stop running. At this time, it is necessary to clean the air conditioner.

If you are unsure about the fault of the air ruler noise adjustment machine, you can find an air conditioner maintenance personnel with a difficult background to check and repair. In order to prevent the air conditioner from malfunctioning, it is recommended to clean the air conditioner regularly to ensure that the air conditioner is operating properly. Hope mine can help you!