Does Audi Q5L burn engine oil? Can it suppress Highlander?

It will not burn the engine oil, but after a long time, the oil must be changed, otherwise it will cause damage to the car body. And Highlander have their own well, and they don't suppress each other. The former has enough power and has an obvious push back feeling at the start, while the latter is stable and feasible on mountain roads.

Causes of Highlander oil burning and how to prevent it.

The engine oil itself has a certain amount of consumption, and excessive consumption is the problem of burning engine oil. There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the following reasons will aggravate the oil consumption and cause the burning of engine oil, so that the vehicle appears:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem.

Burning engine oil means that the engine oil enters the combustion chamber of the engine and participates in the combustion along with the mixture. The phenomenon of "burning engine oil" in the vehicle will damage the vehicle's oxygen sensor too quickly, resulting in an increase in carbon deposition in the combustion chamber, unstable idling, weak acceleration, increased fuel consumption, and excessive exhaust emissions.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

Engine oil is very easy to corrode and age in a long-term high temperature state, resulting in the oil film becoming thinner, and it is easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston wall clearance, etc., all have a direct or indirect relationship with the formation of carbon deposits, considering the relationship between domestic oil products, it is necessary to use high-quality engine oil and (PNF) fuel additives to achieve, which is also the key to achieve no dismantling and repair to solve the problem of burning engine oil.

No oil burning, this car is very good, there will be no burning of engine oil. can be suppressed, this car is much better than the Highlander in terms of its appearance, interior and cost performance.

I don't think the Audi Q5L burns oil. The engine of this car is of good quality, very advanced, does not burn oil, and I don't think it can suppress the Hanlan.

The engine with the 2020 Audi Q5L does not burn oil. The new Q5L is powered by Volkswagen's classic EA888 engine. The key to burning oil in this engine is the first-generation engine.

This engine has been updated to the third generation. Of course, the phenomenon of burning engine oil is generally rare. It is worth mentioning that the engine equipped with this car has not burned oil after market feedback.

In order to protect the engine and prolong the life of the engine, Audi cars are designed to reduce the frictional resistance between the piston ring and the cylinder wall, and an oil film will be formed in the cylinder wall, and part of the oil film will be burned off with the gas burned at high temperature, so the oil loss is more than the same period last year.

1. The processing technology of the engine cylinder of Audi car, the engine cylinder wall is shown as a mesh shape under the microscope, and each small mesh is the "small oil depot" of the oil tung socks, and the piston is better than the lubrication performance of the flat cylinder wall when running up and down in the cylinder, which also minimizes the wear between the piston ring and the cylinder wall.

2. The toughness of the piston ring of the Audi car is better, and the degree of tension is weaker than that of the Japanese car, simply put, it is strong, but the elasticity is small, and this matching naturally reduces the wear caused by the piston ring running up and down on the cylinder wall, so the Audi car after driving hundreds of thousands of kilometers to measure the wear of the engine cylinder wall, which is much smaller than other car series, and the engine can still maintain good working condition.

3. The engine is like the heart of the car, the engine burns oil in the final analysis, or the piston ring has a problem, under normal circumstances, there is no oil loss of 1000km, if it exceeds too much, it is possible to burn oil. If there is a problem with the sealing of the piston ring, the oil will follow the movement of the piston and secretly drill into the combustion chamber to participate in the combustion, and then the oil will be burned.

4. In order to prolong the service life of the engine, Audi car manufacturers burn engine oil.

Precautionary measures for burning engine oil:

1. Use high-quality engine oil

The oil is extremely wide and easy to corrode and age under high temperature for a long time, resulting in the thinning of the oil film and the easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

2. Pay attention to the cleanliness of the fuel circuit

Fuel local excitation in the combustion process is indispensable to produce carbon deposits, and carbon deposits are the root cause of some car failures, such as the aging of valve seals, piston cylinder wall clearance, etc., are directly or indirectly related to the formation of carbon deposits, considering the relationship between domestic oil products, it is necessary to use high-quality engine oil and (PNF) fuel additives to achieve, which is also the key to achieve no dismantling and repair to solve the problem of burning engine oil.

It is a very common phenomenon for Audi to burn engine oil, in fact, no matter what car type of engine has a certain amount of oil consumption, it is not that you think that it is not burned or not, but the performance is not obvious, but excessive consumption is to burn engine oil. As long as there is no serious strain on the cylinder wall, there is no need for major repair.

Most of the engine oil is caused by the piston ring being trapped by carbon deposits. Relying on the addition of high-viscosity engine oil to continue life is only an expedient measure to cure the change. When the oil enters the combustion chamber to participate in combustion, more carbon deposits will be formed, which in turn will lead to the aggravation of the burning of engine oil, forming a vicious circle.

In the long run, it will cause cylinder wall strain, or even cylinder burst, and finally the engine can only be disassembled for overhaul.

Four reasons why you burn engine oil

A ...If you don't clean the oil circuit for a long time or don't do effective oil circuit cleaning, detergents are used at will, and using detergents and effective detergents are two different things;

IIThe antifreeze replacement cycle is too long or not changed at all;

IIIThe oil change interval is too long;

IVLong-term or often short-distance driving.

The above four points of the vehicle that burns engine oil must be occupied by one or all four points.

How the piston rings are stuck

The principle of piston loss sensitive ring stagnation should start from the oil circuit, the oil bearing temperature is 110 degrees, and the high temperature caused by the long-term unclean oil circuit makes the oil at a temperature of 120 degrees or higher for a long time, so that the oil will be exhausted in advance, the small hole of the oil ring is very small, and the oil inside will be dried and scabbed for a long time, and a cylinder stuck is 5000 kilometers of a liter of oil, at this time, the working conditions of other cylinders will also begin to be bad, and soon 4 cylinders will be stuck. It becomes a liter of engine oil for 1000 kilometers or even hundreds of kilometers. Therefore, in order to solve the problem, we must start from the root oil circuit, which is the way to remove the root.

The solution to burning the oil

In the habitual thinking of car enthusiasts, they always think that burning engine oil should be overhauled, so that they not only have to bear high maintenance costs, but also bear the unpredictable risks and depreciation losses brought about by the overhaul. Destroy the airtightness and precision of the engine pins. And there is a possibility that the engine oil will burn again after tens of thousands of kilometers, so overhauling the engine is not sustainable.

Now the no-dismantling technology has been very mature and gradually accepted by the majority of car owners. Especially containedThe patent technology of the PNF is popularNon-destructive repair products, has completely gotten rid of the technical shackles of the operation of the auto repair shop, without removing a screw, the owner can operate it himself, and the piston ring is repaired and released during driving, and the effect is remarkable.

The new Audi Q5L will also burn engine oil

1. The situation of burning engine oil in Q5L is less than before, but it is still used, and the solution to burning engine oil can only be done now to overhaul the engine, but it is too troublesome and the cost is high, I think it is not necessary;

2. Now it is all continued with engine oil, using imported GT Magic Red engine oil, four types of PAO base oil, its own quality is very good, even if there is a situation of burning engine oil, it will not produce any carbon deposits, and it will not have any impact on engine power;

3. At the same time, it can be very good to protect the engine, although there is still a situation of burning engine oil, but there is no problem with the power, and the oil is less.