What are the main lights of the car? What are the car lights?

Headlights: commonly known as headlights, there are two kinds of low beam and high beam, and the main function is used for night driving lighting; Width indicator light: mainly used to show the width and length of the body at night, reminding other vehicles and pedestrians to see themselves; Daytime running lights:

It is only used to remind other vehicles and pedestrians to pay attention to safety during the day; Turn signals: general turning, merging, and double flashing lights in emergency situations are all realized, emitting yellow and regular flashing lights to remind other vehicles and pedestrians to pay attention to safety; Brake light: The brake light is red, which is used to tell the rear car to slow down; Fog Lights:

Fog lights can help drivers improve visibility in foggy days, notify oncoming vehicles, avoid each other, and meet cars safely; Reversing lights: After engaging in reversing, the reversing lights will be lit up synchronously, and their function is to remind the rear vehicle or pedestrians behind the car to indicate the intention of reversing; License plate light: This lamp is used at night when the sky is not good, illuminate the vehicle license plate, in the road traffic safety law clearly stipulates that the license plate light must be turned on when driving at night, and it is required to be clearly visible within 20 meters.

1. Car headlights.

Car headlights are a very important lamp when the car is driving at night, and there are many types of car headlights, including halogen headlights, LED headlights, xenon headlights and laser headlights, and the types of headlight shape design are also different.

2. Fog lamp. There are two kinds of fog lights: front fog lamps and rear fog lights, the front fog lights are installed in the front of the car, and the installation position is slightly lower than the headlights. Because the penetration of fog lamps is relatively strong, they are mainly used for driving in rainy and foggy weather, so the driver must turn on the fog lights when driving in foggy days, and cannot replace them with small lights.

3. License plate lamp.

The license plate light is installed above the license plate at the rear of the car and is used to illuminate the license plate at night.

4. Night travel indicator light.

Colloquial name"Small lights"This light is used to show the width and length of the body at night, and the driver usually has to check it frequently when he carries out routine maintenance, and some drivers think that the small lamp does not play a lighting role, and does not pay enough attention to it, which is very wrong.

Hello, the main automotive lights are: headlights (including high beam, low beam), front position lights, rear position lights, license plate lights, instrument lights, turn signals, brake lights, hazard warning flashing lights, reversing lights, front fog lights.

Hope this helps you, please, thank you!!

The lights on a car are high beam, low beam, rear light, headlight, and turn signal.

There are a lot of lights on the car, these lights are distributed in different positions, and they play different roles, so let's talk about the role of the lights in each part of the car.

In front, there are headlights (high beam, low beam), daytime running lights, turn signals, fog lights (not all models have front fog lights). Indicator light.

There are brake lights, turn signals, fog lights at the rear. License plate lights.

Automobile lights can be divided into two categories according to their functions: lighting lights and signal lights, and according to the installation position, they can be divided into external lights and internal lights. Exterior lights mainly play the role of lighting and signal indication, mainly including automotive lamps according to the function of headlights, fog lights, license plate lights, reversing lights, brake lights, turn signals, position lights, marker lights, parking lights and warning lights, external lights generally use white, orange and red three colors.

Hello. The headlights and taillights in front of the main light atmosphere, of course, the front fog lights, are composed of three parts, the more common ones are the headlights, turn signals, brake lights, etc., which are all lampposts that belong to the signal class.

The "soul" of the headlight is its bulb, and its performance will affect the effect of night lighting, which is directly related to driving safety. Therefore, high-quality headlight bulbs should be used to fully guarantee safety.

Daily maintenance of car lights should be done well.

According to the different principles of luminescence, headlight bulbs can be divided into several types such as vacuum lamps, halogen lamps, and xenon lamps. Vacuum lamps and halogen lamps** are cheap and widely used, but they have a shorter lifespan, generally a few hundred hours. The service life of xenon lamps can reach 2500 to 3000 hours, and the illumination effect is better, but ** is higher.

Of course, no matter what type of bulb it is, its basic maintenance knowledge is almost the same.

In the same way that the oil filter needs to be replaced during regular maintenance, the headlight bulb needs to be replaced regularly. Generally speaking, every 50,000 kilometers or about 2 years, the brightness of the headlight bulb will be weakened, at this time it is best to go to the 4S store for a test, if there is indeed a lack of brightness, then it is recommended to replace the bulb, it is recommended to replace the left and right sides at the same time, so as to avoid the situation that the brightness on both sides is not the same. I just didn't replace the bulb in time after the brightness of the bulb dimmed, which caused the time to be wasted during the annual inspection.

There is also a situation where the lampshade is aging due to the influence of the environment, which will also reduce the brightness of the headlights to more than 50%. Dirty and aging lampshades will also blur the lights and make people dizzy, so the aging of the lampshades should also be replaced in time. I hope the subject and netizens are grateful.

Mainly: headlights (including high beam, low beam), front position lights, rear position lights, license plate lights, instrument lights, turn signals, brake lights, hazard warning flashing lights, reversing lights, front fog lights, etc.

Low beam, high beam, overtaking lights, small lights, fog lights, reversing lights, brake lights, emergency lights, turn signals.

Headlamps (including high beam, low beam), front position lights, rear position lights, license plate lights, instrument lights, turn signals, brake lights, hazard warning flashing lights, reversing lights, front fog lights, etc.

October 14, 2020 · Guangming Network Official.

As a novice, car lighting is a problem, let's get to know the various lights of the car through **.

Article**1 High beams and low beams may be the most similar, and they are also the easiest to confuse car owners, in fact, they are still very different. The light lines of the low beam sign are diagonally downward, while the light line of the high beam sign is straight forward.

Article**2 In addition to looking at the dashboard, how can you judge? As shown in the figure, the light of the low beam is shining downward, and between 12-18 meters in front of the car, there is a very obvious cut-off line of light and darkness.

Article **3 looks very similar, and there are also front and rear fog lights. Fog lights are light signals used in foggy weather, and fog lights are more penetrating in fog, so they are easier for vehicles or pedestrians to notice early.

Article **4 In use, first of all, make sure that the width indicator light is turned on, and then you can turn on the fog light. Among them, the front fog lights can be turned on separately; The rear fog lights can only be turned on at the same time as the front fog lights, and cannot be turned on separately.

Needless to say, the turn signal switch is generally raised, and the right turn signal is on; Pull down, and the left turn signal is on. Up, right, down, left, this design is also in line with the human body's feelings, more in line with the human body's operating thinking.

Article **5, Article **6

When turning to the width indicator light position, the car's small lights turn on. The width indicator lamp is a kind of warning sign of the car light, white in the front and red in the back, generally installed at the edge of the top of the car, so that it can indicate both the height and width of the car. It is usually opened when the sky is not completely dark, and it is mostly used in the evening.

Article **7 Article **8

The red triangle button on the instrument panel is the double flash switch, which can be turned on when pressed. The function of the double flashing lights is to arouse the vigilance of other vehicles when the vehicle has an accident to prevent a rear-end accident.

Article**9 The brake light does not switch directly, but through the light that lights up when we press the brake. When the brake pedal is pressed, the brake light immediately illuminates and emits a red light to alert the vehicle behind it.

Article **10

The same principle also has the reverse light, the switch is related to the reverse gear, and does not need to be operated directly. The reversing lights are white, which is used to illuminate the road surface at the rear of the car, reduce blind spots when reversing, and also serve as a reminder to the rear.

Disclaimer: This article is for the purpose of conveying more information. If there is a ** marking error or infringement of your legitimate rights and interests, please contact this website with the author's ownership certificate, and we will correct and delete it in time, thank you.

Mainly: headlights (including high beam, low beam), front position lights, rear position lights, license plate lights, instrument lights, turn signals, brake lights, hazard warning flashing lights, reversing lights, front fog lights, etc.

Hello, car lights can be divided into high and low beams, marker lights, hazard warning flashers. Turn signals, brake lights.

Hello, about this kind of problem, low beam, high beam, marker light, hazard warning flash, front fog lights, rear fog lights, daytime running lights, turn signals, brake lights, I hope to help you, hope to adopt!

1. Alternate use of high and low beams, urban roads generally use low beams, if you use high beams, do not use them for a long time, turn on the lights in special weather, and turn on the wide lights ,..

2. If the visibility is less than 50 meters, turn on the fog lights, and the highway will also show wide lights during the day to make it easier for others to pay attention to you.

3. The high beam of the special road section becomes the low beam, and the opposite side of the car will be met.

Low beam: Used at night when driving in the city. On the one hand, the roads of the city are illuminated by street lights, and there is no need for high beams to search the road surface in the distance, just to see the road surface conditions in front of the car; On the other hand, there is a large traffic flow on urban roads, and turning on the high beams not only causes the other party to dazzle when meeting the traffic, but also affects the vision of pedestrians on both sides of the road.

In heavy rain and snow, not only is the visibility very low, but the braking distance of the vehicle is also increased.

The automotive lighting system includes: headlights (high beam, low beam), turn signal, fog lamp, reversing lamp, indoor lighting, brake light, tail light, instrument lighting, license plate light, etc.

Low beam, high beam, marker lights, hazard warning flashers, front fog lights, rear fog lights, daytime running lights, turn signals, brake lights.

Left turn indicator: indicates that the car is about to turn left, and it is pre-opened 100 30 meters away from the intersection;

Right turn indicator: indicates that the car is about to turn right, and it is pre-turned 100 30 meters away from the intersection.

The reversing light automatically turns on when the vehicle is in reverse gear.

Anti-fog lamp, turn on and use in foggy days, rain and snow days (night).

Width indicator lights, tail lights, and license plate lights are turned on at the same time as the headlights are turned on. Left turn indicator: indicates that the car is about to turn left, and it is pre-opened 100 30 meters away from the intersection;

Right turn indicator: indicates that the car is about to turn right, and it is pre-turned 100 30 meters away from the intersection.

The reversing light automatically turns on when the vehicle is in reverse gear.

Anti-fog lamp, turn on and use in foggy days, rain and snow days (night).

Width indicator lights, tail lights, and license plate lights are turned on at the same time as the headlights are turned on.

1. Headlamp: The main purpose of headlamp is to illuminate the road and objects in front of the car to ensure driving safety. It can also use the alternating transformation of high beam and low beam as a night overtaking signal.

Headlamps are installed on both sides of the car's head, with 2 or 4 headlamps per car. The bulb power is 45 60W for high beams and 25 55W for low beams.

2. Fog lamp: The fog lamp is installed near the headlamp or slightly lower than the headlamp. It is a luminaire that serves as a road light and provides a signal for oncoming traffic in conditions of low visibility, such as fog, snow, heavy rain or dust.

The lights are mostly yellow, because the yellow light wave is longer and has good fog permeability. The bulb power is generally 35W.

3. Reversing light: The reversing light is installed at the rear of the car to illuminate the road behind the car and inform the vehicle and pedestrians that the vehicle is reversing or preparing to reverse. It also functions as a light signaling device. The light is white and the power is 28W.

4. License plate light: The license plate light is installed above the tail license plate of the car, and its purpose is to illuminate the rear license plate of the vehicle. The requirement is that the number on the license plate can be read 20 meters behind the car at night. The light is white and the power is generally 8 10W.

5. Dome light: a lamp installed on the top of the cab or car for lighting in the cab. The ceiling light is white, the lampshade is mostly made of transparent plastic, and the bulb power is generally 5 8W.

6. Instrument light: It is a tool for instrument lighting, which is often connected with the dashboard. The light is white, and the bulb power is generally 2 8W.

The car is equipped with various lighting and signal devices, in order to ensure the safety and reliability of the car, to illuminate the road, to indicate the width of the vehicle and the position of the vehicle, and to illuminate the interior of the cabin. Indication instruments and night vehicle maintenance, etc. In addition, in the case of turning, braking, meeting vehicles, stopping, reversing and other working conditions, bright or audible signals should also be emitted to warn pedestrians and other vehicles.

Automobile lamps and lanterns are divided into lighting lamps and signal lamps according to their functions; According to the installation position, it is divided into external lamps and internal lamps.

1. Exterior lamps.

Combined lamps, the car assembles the headlights, front turn signals, and front position lights together, which is called a combination headlight.

The rear turn signal, brake light, rear position signal, rear fog light, and reversing light are assembled together, which is called a combination rear light.

1. Headlamp.

Also called headlights or headlights, they are installed on both sides of the front end of the vehicle and are used to illuminate the road when driving at night. In order to prevent the strong light of the headlamp from dazzling the driver of the oncoming vehicle, the headlamp generally uses a double-filament bulb, that is, two filaments, high beam and low beam, which emit a high beam beam and a low beam beam respectively.

2. Position indicator light.

Position indicator lights are also called wide indicator lights and position lights; Mounted on the edges of the front and rear sides of the car to indicate the presence and width of the vehicle.

3. Fog lamps. Fog lights are installed at the head or rear of a car to improve the illumination of the road surface in conditions of fog, rain, snow or wind and dust.

The front fog lights are generally yellow or orange and are installed lower than the headlights. The rear fog lights are red to warn trailing vehicles to keep a safe distance.

4. License plate lamp.

The license plate light is installed above or on the left and right sides of the tail photo.

5. Reversing lights.

The reversing light is installed at the rear of the car, and when the gearbox is in reverse, it automatically lights up, illuminates the rear side of the car, and warns the rear vehicles and pedestrians at the same time.

6. Turn signal.

The main turn signals are generally installed on the left and right sides of the head and tail of the car to indicate the driving direction of the car. Generally, there are also side turn signals installed in the middle of the side of the car. Gradually, in small cars, side turn signals are installed in the exterior mirrors.

7. Brake light.

Also called a brake light, it is installed in the rear of the car. When the brake pedal is pressed, a strong red light is emitted to indicate braking.

8. a marker lamp.

Vehicles with an empty vehicle height of more than 3 meters are equipped with marker lights to indicate the contour of the vehicle.

Second, the internal lamps.

1. Dome light. Cars are generally equipped with a dome light, which is not only used as interior lighting, but also can also monitor whether the doors are closed reliably.

2.Meter lights.

Gauge lights are used to illuminate instrument panels. It is controlled by the main light switch, and the main light switch is turned on, and the instrument light is on.

3. Door lights. The door light is located at the bottom of the inside of the car's outward-fledged door, and when the door is opened, the door light illuminates to warn pedestrians behind you.

4. Reading light.

The reading light is mounted on top of the cockpit.

5. Luggage compartment light.

Installed in the baggage compartment, it will automatically light up when the baggage compartment is opened.