How to use car lights correctly for newbies? Are there any rules for use?

Tips for beginners to use car lighting correctly: follow the car: when following the car at night, the front high beam should be turned off, and Lu turned on the front low beam; Meetings:

When encountering or coming from the opposite direction, we must turn off the high beams. The high beam will make the driver of the oncoming vehicle unable to see the road ahead, which can easily cause accidents. When passing through a dimly lit intersection, alternate between near and far lights and whistles.

Correct use of car lights for beginners:

1.Turn left when driving a motor vehicle, change lanes to the left, prepare to overtake, and turn on your left turn signal when driving away from a stop or making a U-turn.

2.Turn right when driving a motor vehicle, change lanes to the right, drive back to the original lane after overtaking, and turn on your turn signals in advance when stopping on the side of the road.

3.When driving a motor vehicle in low visibility conditions such as rain, snow, dust, hail, etc., the large jujube lights, marker lights, and rear position lights should be turned on, but the high beams shall not be used when the rear vehicle driving in the same direction is close to the front vehicle.

4.When driving a motor vehicle in foggy weather, turn on fog lights, hazard warning flashers, headlights, marker lights, and rear marker lights. However, when driving in the same direction, the high beams shall not be used when the rear vehicle and the front vehicle are driving for a short distance.

5.When driving a motor vehicle without street lights or poor lighting at night, turn on the high beams, position indicators, and rear position indicators, but when the rear vehicle driving in the same direction is close to the front vehicle, the high beam shall not be used.

6.When driving a motor vehicle at night through sharp bends, steep slopes, arch bridges, and pedestrian crossings, as well as when crossing and overtaking without traffic lights, low beams should be used alternately, and low beams should be used when crossing with pedestrians and non-motor vehicles on narrow roads and bridges.

7.When driving a motor vehicle near a sharp bend, a ramp top and other road sections that affect the safe visual distance, overtaking, or encountering an emergency, you should slow down and honk.

8.When driving a motor vehicle to break down on the road or a traffic accident occurs, obstructing traffic, the hazard warning flashing lights shall be turned on in accordance with the regulations, and warning signs shall be set up 50 meters or 100 meters behind the vehicle. At night, marker lights and tail lights should also be used at the same time.

9.Drive a motor vehicle from the ramp onto the highway, turn on the left turn signal, and enter the acceleration lane without hindering the normal operation of the vehicle already driving on the highway.

10.When driving a motor vehicle off the highway, the right turn signal should be turned on in advance, and the vehicle already driving on the highway should enter the deceleration lane without hindering the normal driving of the vehicle already on the highway, and enter the ramp after slowing down.

Millions of car purchase subsidies.

The precautions for the use of automobile lights are as follows: 1. When a motor vehicle passes through an intersection controlled by a traffic signal and turns to the left, turn on the turn signal, and turn on the low beam when driving at night. When driving in close proximity between the vehicle behind and the vehicle in front of the vehicle driving in the same direction, the high beam lights must not be used.

2. When a motor vehicle passes through a sharp bend, slope, arch bridge, pedestrian crossing or an intersection without traffic signal control at night, it shall alternately use high and low beam lights. 3. On roads where there is no central isolation facility or there is no center line for those who sing stoves, the night meeting car should be changed to low beam lights 150 meters away from the opposite direction. 4. Low beams should be used when meeting non-motorized vehicles on narrow roads and narrow bridges.

5. When a motor vehicle breaks down on the road or a traffic accident occurs, and the wild trail obstructs traffic and is difficult to move, the hazard warning flashing lights shall be turned on in accordance with the regulations, and warning signs shall be set up at 50 meters to 100 meters behind the vehicle, and the light and rear position lights shall be turned on at the same time at night.

1. Left turn signal.

Operation: Flip the light stick down.

Instructions for use: 1) In the process of driving, the left turn signal must be turned on when it is necessary to overtake;

2) When the car starts, the left turn signal must be turned on;

3) When you need to turn to the left at an intersection, you must also turn on the left turn signal.

2. Right turn signal.

Operation: Flip the light stick up.

Instructions for use: 1) To complete the overtaking action during driving, the right turn signal must be turned on;

2) When the car is parked, it must turn on the right turn celery direction light in advance;

3) When you need to turn to the right at an intersection, you must also turn on the right turn signal.

3. Low beam.

Operation: Turn the pulley to the position of the low beam.

Instructions for use: 1) When driving in urban areas at night, you must turn on the low beams;

2) In the process of driving, the low beam must be turned on when encountering the tunnel;

3) When handing over cars at night, turn on the low beams.

4. High beam.

Operation: Turn the pulley to the position of the high beam.

Instructions for use: When driving on country roads at night, you can turn on the far-bend balance lights. However, it must be noted that if you encounter an oncoming car in front of you, you must switch the high beam to low beam.

5. Fog lamp. Operation: Rotate the fog lamp position to the "on" position.

Instructions for use: If the road you are driving on is foggy or rainy, you can turn on the fog lights.

6. High and low beams.

Operation: Swing back and forth the position of the high and low beams.

Instructions for use: 1) When driving at night through some entrances or with pedestrians or bicycles in front, you can turn on the high and low beams to inform the vehicles coming behind;

2) During night driving, if the oncoming car on the opposite side has its high beams, you can also turn on the high and low beams to tell the other party to turn off the high beams.

7. Double flashing lights.

Operation: Press the double flash button below the dash cam.

Instructions for use: 1) In the case of traffic congestion, you can turn on the double flashing lights to avoid rear-end collision by the rear car;

2) In the case of temporary docking, it can also be turned on double flash;

3) When the car breaks down and is parked on the side of the road, you can turn on the double flash to inform the oncoming car behind to pay attention to avoidance.