After a power outage, the broadband is always cut off, what is the reason and how to get it 50

Call the carrier's customer service to reactivate.

Restart the next cat, it's generally a failure, and it's still not good after restarting, so that professional people can repair it by calling ** to customer service.

There are 3 ways to inquire before and after a power outage.

1.Call 95598 Electric Service** and follow the voice prompts.

2.Search for the ** in the region where the (State Grid) login is located, click on the central location of the home page [Service and Support] - [Power Service] - [Power Outage Announcement] - fill in [Region] - Start and End Time], fill in [Power Outage Range], and click [Query].

3.If you want to view the power outage information, click Public Information, and then click Power Outage Information;

5.Finally, you can see the power outage information, and if the area is not right, you can also choose the right area.

Note: If there are frequent power outages in the area, it is recommended to buy a generator set to standby, the choice of gasoline generator for the family can be, if the household power is more than 10kw, it is recommended to use a diesel generator is more cost-effective, the generator set is noisy, you can choose a silent diesel generator, the gasoline generator is quieter, and there is basically no need for a silent box.

The standby power generator set used by the enterprise unit is good to choose the diesel generator, which can be used, silent diesel generator set, or automatic diesel generator set, the automation can be self-starting, and when the mains power is off, the diesel generator set starts by itself, which is very convenient.

If the power goes out and the call comes, the broadband can not be connected, you can turn off the optical modem and the router, and turn it on again in a few minutes, it should be able to connect, if it is not good, contact the operator's customer service to refresh the background data.

Hello, I have seen your question. We're working hard to sort out the answers for you, and it takes a little time to type, so please wait a minute. You can check the answer later or ask a follow-up question. I hope my answer is helpful to you.

Hello, cause analysis: It may be due to a sudden call, resulting in a router startup and running error, it is recommended to power off the router and the cat for 2 minutes, and then turn on the power to try. Workaround:

1. Restart the router, or click reset on the router to restore the factory settings, or enter it on the computer to reset the password of the wireless router. In the event of a sudden power failure or power failure, the mobile phone has a full wifi signal, but it is not connected to the Internet, so don't worry. When a call comes in, turn off the power switch on your router.

Hope it helps.

If you call again after a power outage, and the broadband connection does not go up, you should restart it and reconnect.

After the power outage, the broadband connection is not available, which means that it takes a certain amount of time to connect to the broadband after the power outage, because the broadband needs to be redialed in the process of connection before you can access the Internet.

What should I do if the electricity broadband connection is not available after the power goes out, you can manage that cat for five minutes and ten minutes before restarting.

After a power outage, the broadband connection is not available, and there is no prompt connection error code, the solution is as follows:

Broadband connection is not available due to an abnormal NIC driver

1. Right-click "My Computer" or "Computer" and click to open "Device Manager".

2. After opening "Device Manager", select and open "Network Adapter".

3. After opening the "network adapter", check whether the network card driver is normal, now it is normal, if there is a yellow exclamation mark, the network card driver is abnormal, and the network card driver can be reinstalled. (The network card driver can be ** in driving life).

Solution to the Failure to Connect Broadband Caused by Network Cable and Optical Modem:

1. Turn off the power supply of the "modem" and restart, and check whether the "modem" indicator does not light up.

2. Unplug and reinsert the "network cable" connected to the computer host, or unplug the network cable that is plugged into the "optical modem" network cable connection and try to plug it back in.

Special note: If the modem indicator is abnormal or the indicator light is not lit, it is recommended to check the "manual" for specific operations, if it still cannot be solved, it is recommended to go to the broadband business hall to replace the new modem to connect to the network normally.

Then all devices should be restarted, especially the optical modem. Then I'm going to look at your router. See if autodialing is in progress.

The power outage causes the broadband connection to be unavailable, you can restart the router when you call, and you can use it normally when you restart the router, if it is not yet normal, you can find a staff to help you check and repair.

There is a problem with the moden or the line. Call the service provider. For example, if you call 10,000 for telecommunications.