What happens if two memory bars are broken, and what happens if the memory sticks are broken?

Updated on number 2024-04-14
14 answers
  1. Anonymous users2024-02-07

    Everything above says that the memory is incompatible,I'll step on them all one by one,To be honest,The landlord has no problem with your test,To this point, I think you should be able to draw conclusions.,I don't know why you have to come up and ask.,There's no problem with the power supply.,There's a problem with the motherboard slot? A little doubt,You see if the single-socket AEGON can't get up in every slot.,If so, it's undoubtedly the problem of the ADATA strip.,As for your group's DDR2 533 and the previous dual-pass no problem.,If it's not compatible, it won't cause you to get up with the single-socket Vigang.,It's obviously a problem with the strip.,It is recommended that you go to the place where you buy it.,If it can be used at the dealer.,It means it's a problem with your board.,But it's a bit far-fetched to explain with incompatibility.,Personal feeling, The possibility of a problem with the memory module is very great, the possibility of incompatibility of the motherboard is very small, and the possibility of the motherboard slot being broken is general, so start with the memory to check it, take it and replace it, if it is good, then check the motherboard slot, it is best to consider whether the motherboard is problematic, whether there will be the possibility of incompatibility, or that sentence, the possibility of incompatibility I said above is very small, in fact, I think it is the possibility of 0

  2. Anonymous users2024-02-06

    This means that your ADATA memory module is broken or your motherboard is not compatible with this memory, you can plug in Qimonda, but it will be a little slower if you run too many programs, and the rest will be fine.

  3. Anonymous users2024-02-05

    The best brand of dual-channel is the same, at least the memory module is from the same manufacturer, and the delay should be the same. There is a software on the Internet, I forgot the name, you can say that the delay of the two memories is set to read only one.

    You can also insert DIMM 1 and 3 into the memory, which can make the memory activate initially.

  4. Anonymous users2024-02-04

    What are you talking about?? Go test it yourself, and the division method will come out. 2 swap slots to try, cheat and slot cleanup, try slowly, maybe try to have hung up,。 Can 2 plugs be bright?

    It can't be broken.

  5. Anonymous users2024-02-03

    There's just one that works, it's just that the computer is running a little slower.

  6. Anonymous users2024-02-02

    Hungry? It only means that your awesome is broken. It affected the normal operation of the follower.

  7. Anonymous users2024-02-01

    Dual-channel is best 2 of a model, different models are prone to problems together. . .

  8. Anonymous users2024-01-31

    1. No display at startup It is a common phenomenon for such failures to occur due to memory modules.

    2. The operation of the Windows system is unstable and often produces illegal errors This kind of failure is generally due to the poor quality of the memory chip.

    3. The Windows registry is often damaged for no reason, prompting users to restore Such failures are generally caused by poor quality of memory modules, which are difficult to repair and can only be replaced.

    Fourth, Windows often automatically enters the safe mode This kind of failure is generally caused by the incompatibility between the motherboard and the memory module or the poor quality of the memory module, which is common in PC133 memory used on some motherboards that do not support PC133 memory module, you can try to reduce the memory read speed in the CMOS setting to see if it can solve the problem, if not, then only replace the memory type of noisy strip.

    Random crash This kind of fault operation is generally due to the use of several different chip memory modules, due to the different speed of each memory module resulting in a time difference resulting in a crash, which can be solved by reducing the memory speed in the CMOS setting, otherwise, the only way to use the same model of memory.

    There is also a possibility that the memory module is incompatible with the motherboard, which is generally rare, and it is also possible that the memory module is in poor contact with the motherboard and causes the computer to crash randomly, which is more common.

  9. Anonymous users2024-01-30

    You can add one.

    If it is 512*2, the bad one will hardly change the speed at all, and the 256*2 bad one will have a more obvious speed drop, especially when opening a large program.

    128*2 words,,Buy memory,512M is only 400 yuan,It's cheap enough.。

    A broken memory module is just missing the corresponding memory capacity.

    Classification of memory:

    DR memory sticks.

    Memory is divided into DRAM and ROM, the former is also called dynamic random access memory, one of its main features is that data will be lost after power failure, we usually refer to this kind of memory; The latter is also called read-only memory, we usually start the BIOS program stored in the ROM on the motherboard first, and then it calls the Windows in the hard disk, one of the main features of the ROM is that the data will not be lost after power failure.

    According to the number of pins on the memory module, we can divide the memory module into 30 lines, 72 lines, 168 lines, etc. 30-line and 72-line memory modules are also known as single-column memory module SIMMs, (SIMM is a memory structure in which both sides of the gold finger provide the same signal,) and 168-line memory modules are also known as dual-column memory module DIMMs.

    The 30-line memory module is gone; The popular varieties in the first two years are 72-line memory modules, which generally have a capacity of 4 megabytes, 8 megabytes, 16 megabytes and 32 megabytes; The mainstream variety of the market is 168 lines of memory, the capacity of 168 lines of memory is generally 16 megabytes, 32 megabytes, 64 megabytes, 128 megabytes and so on, the general computer plug in is OK, however, only motherboards based on VX, TX, and BX chipsets support 168-line memory modules.

  10. Anonymous users2024-01-29

    If the computer has been plugged into the power supply, sometimes the voltage is too high or the voltage is unstable. So when the power is turned off, it is best to wait for 3-5 minutes before turning it on a second time.

    A memory module is a computer component that can be addressed by the CPU and can be read and written. Memory modules used to be an extension of the main memory in the history of personal computers. With the continuous update of computer software and hardware technology, the memory module has become the whole of Zen reading and writing memory.

    When we talk about the size of a computer's memory (RAM), we refer to the total capacity of the memory module.

    A computer is a machine that uses electronic principles to process data according to a series of instructions. A computer can be divided into two parts: a software system and a hardware system.

    The first computer was the ENIAC general-purpose electronic computer born at the University of Pennsylvania in the United States on February 15, 1946.

    People refer to computers without any software installed as bare metal. With the development of science and technology, some new types of computers have emerged: biological computers, photonic computers, quantum computers, etc. On May 24, 1954, the transistor electronic computer was born.

  11. Anonymous users2024-01-28

    If it's 2 unplugged bad ones, it's fine! Nothing else matters! The memory is smaller, and the speed of opening web pages will be a little slower!

  12. Anonymous users2024-01-27

    Looking at the computer, there are a few. If there is only one, then the computer display will not light up. If there are only two, then the computer will be stuck than before.

  13. Anonymous users2024-01-26

    If you can't read it, it's just that one is missing, and if it's only one, then you can't turn it on.

  14. Anonymous users2024-01-25

    Memory sticks. It is not easy to destroy, and the general life can last until the entire computer is eliminated.

    1. The memory module is semiconductor fiber, no mechanical structure, and no wear. The damage rate is extremely low.

    2. There are also memory damages, which are usually caused by incorrect operations, such as live plugging and unplugging, moisture and water. Normal use, the annual rent is rarely broken.

    3. When overclocking and using memory, pay attention to heat dissipation. Overclocking can also overheat, which can also lead to memory corruption.

Related questions
12 answers2024-04-14

To detect whether there is a problem with the memory module, you need to click the start menu control panel, double-click to open the management tool, if the display is different, click the view method in the upper right corner, select the big icon, double-click the windows memory diagnosis in the management tool, click restart now and check the problem, restart, and automatically enter the windows memory diagnosis tool.

8 answers2024-04-14

ASUS P5VD1-X motherboard chip.

Supports dual-channel DDR 400 333 >>>More

6 answers2024-04-14

The speed of adding memory will be felt.

10 answers2024-04-14

DDR3 is definitely DDR2 good, but the slots are not the same, that is to say, two slots cannot be inserted into the same slot. If you originally support DDR2 800, then you can only change DDR2. If the motherboard is a mix of DDR2 and DDR3, remember to correspond.