The speed of the master of the installation is 20, and the speed of the master of the installation i

Motherboard 380 Western Digital Blue Disk 320g --320 yuan.

Memory 667 discontinued 800 of it. 1g gives him a maximum of 80 If it's expensive, don't buy it. I just got the same machine as you.

I don't know why I chose a 320G hard disk CPU for AMD 5000+ 1500 to get it.

The price of hard drives has increased recently, but it should be no problem It is recommended to use ASRock's G31 motherboard.

Use ghost to install a CD, one-click installation system, convenient and fast, go to the computer city to buy one! A worry-free hand-mounted machine!!

A few problems with the first 2G RAM installed on a 64-bit system ,, it will definitely not run.

Second, if your system is not good, it is recommended to change the system and reinstall it again.

It turns out that you feel smooth with the XP system? If the configuration is low, the installation of win7 and win8 system will become a card.

I only have a different opinion about TPV's monitor, I have repaired a lot, and I personally think that this is not of good quality, so I don't recommend it.

The fastest USB installation system, novices highly recommend the optical disk installation system. Partition first,Then recover WinXP's GHO to C drive,I'm talking about using ghost software to install the system。

Cell phone? Computer? Hardware? Software?

This is a rare question. I also have a hard disk of this kind, and the normal speed should be about 150. Will it be a problem with the data cable, replug it or try another one.

This has nothing to do with the SATA interface you plug in, SATA2 or 3 is not much different, after all, the bandwidth of SATA2 fully meets the maximum speed of the hard disk.

The hard drive interface of the ASUS M5A97 LE is SATA3, which is the same as your hard drive, so it is not a hardware issue. In addition, you should pay attention to the use of SATA3 hard disks.

SATA3 hard disk data cable, data cable and power cable both ends of the plug tightly, do not hot-swap the rest is the software problem.

First of all, you need to enable AHCI mode in the BIOS.

Secondly partition the hard disk under PE. This month, you can also hang it to someone else's win7 system machine to partition it, and naturally achieve 4K alignment.

Then install the system to the C drive.

If you do it correctly, the transfer time is 10M, and it depends on what your other hard drive looks like, and the speed depends on the slowest one.

First, look at the manual, connect the cable to the SATA1 port (anyway, the number is the smallest) (remember that the number of large interfaces is compatible on some motherboards) Second, use the SATA cable.

Third, AMD supports SATA hard disk is more troublesome, in addition to the driver of the motherboard chip to install patches, there is also the driver of the South Bridge chip (after installation, SCSI and RAID controllers will appear in the device manager, and the disk drive will also become SCSI Disk or the like), but also to install RAID Xpert, and run to open NCQ

Fourth, the sequence of installing drivers may also be a problem, first install the motherboard's patches and drivers, and then install others.

Read? What do you mean by reading? Transfer computer files to an external USB flash drive or extract files?

You save the things in the C drive, desktop, and my documents, put them in the D and E drives, and when you reinstall them, just format the C drive.

After entering PE, there should be a system installer or restore software on the desktop of PE.,Open it and follow the prompts on the line.,If you ask for a GHO file or something, it's generally in the same directory as PE.,Of course,You can also use your own.。

Are you going to install the system or what?

Your installation disk is not good, it is recommended to use a U disk or a native disk.