The Huabao electric water heater is not heated, and the Huabao induction cooker is not heated

The hit rate of a broken heating tube is 70 percent.

There is nothing in the electric water heater, let alone the mechanical one, the indicator light is on, which means that the electricity is on, and the heater is not heated and the heater is the most likely to be broken.

The temperature control switch is generally adjusted, and few people will be so bored and adjusted every day, so it is unlikely to be broken.

There are two thermostats, and there is also an anti-dry over-temperature protection, and the one is disconnected and will not be automatically connected.

It's expensive to change it for 140 yuan, but what's the solution, Miss, what do you say?

Must it be that the heating tube is broken?

Why are you sure that I am a zealous person? If it can be fixed, won't it?

This is simple, you watch them take it apart, stare at them, see what they don't move except the heating tube, if you only move the heating tube, replace the heating tube, you can use it, then the heating tube must be broken.

It's all up to your eyes, okay, it's bad or not, just change it, you say it's not.

If you can buy the same model of heating pipe, you can also change it yourself, this depends on whether you will, dare not, dare not bear the accident yourself (there are reports on the Internet that the electric water heater has electrocuted people, this they have changed, of course, there is something to find them, and you can only find yourself if you change it).

Do you know that people who are not old, who are not sick and have knowledge, and who are in good health, but who just can't make money?

Tell you, is it because they lack guts and? (Two words to tell you later).

I have time to talk, I'm bored anyway. It's up to you whether you choose the best or not, and there's nothing good about a zero score, are women so stingy? Are you sure?

I don't know what the structure of your water heater is, the general water heater is controlled by the temperature switch, if the temperature switch is damaged, it will also cause no heating, ** at about 2 yuan, if the heating pipe is damaged, after the warranty period, you can take the damaged heating pipe to the electrical market to buy, generally about 10 yuan can be bought, and it will be OK after installation as it is.

Huabao electric water heater does not heat because the heating pipe is broken, it is recommended to find a professional maintenance personnel to replace the heating pipe.

The heating tube is made by loading the heating wire in the seamless metal pipe (carbon steel tube, titanium tube, stainless steel tube, copper tube), and the void part is filled with magnesium oxide powder with good thermal conductivity and insulation, and then shrinking the tube, and then processing it into various shapes required by the user. It has simple structure, high thermal efficiency, good mechanical strength, and good adaptability to harsh environments. It can be used for the heating of various liquids and acids and alkali salts, and is also suitable for the heating and melting of metals with low melting points (lead, zinc, tin, babbitt).

If the temperature switch is damaged, it will also cause no heating, ** about 2 yuan, if the heating tube is damaged, after the warranty period, you can take the damaged heating tube to the electrical market to buy, generally about 10 yuan can be bought, according to the original installation on the OK.

Water heaters that use electricity as an energy source for heating are often referred to as electric water heaters. It is one of the three major water heaters alongside gas water heaters and solar water heaters. Electric water heaters can be divided into three types: water storage type (also known as volumetric type or heat storage type), instant heating type, and rapid heat type (also known as semi-water storage type) according to the heating power.

Electric water heaters can be divided into three types: water storage type (also known as volumetric type or heat storage type), instant heating type, and rapid heat type (also known as semi-water storage type) according to the heating power. The storage type is the main form of electric water heater, which can be further divided into vertical, horizontal, floor-mounted, under-sink type, and the newly listed integrated type with bathroom cabinet integration design according to the different installation methods. According to whether it is under pressure or not, it can be divided into open type (simple type) and closed type (pressure type), and can be divided into household and commercial according to the way of use. According to the heating method, it can be divided into three types: magnetic energy, resistance wire, silicon tube, etc.

Huabao induction cooker is a kind of intelligent induction cooker, which adopts radio frequency electromagnetic induction heating technology, which is easy to use, safe and energy-saving, and is an indispensable kitchen appliance for modern cooking. However, sometimes the induction cooker does not heat properly, resulting in food that cannot be cooked. The following are the reasons that may cause the Huabao induction cooker not to heat:

1.Faulty power cord or outlet: If the power cord is damaged or the outlet is faulty, it can cause the cooker to not work properly. It is recommended to replace the power cord or change to a stable outlet to ensure that the power supply** is normal.

2.Unsuitable cookware: The induction cooker needs special adapted cookware, otherwise the cooker is not enough to contact the heating area and cannot transfer heat well, resulting in the induction cooker not heating. It is advisable to use suitable cooking utensils or replace them with suitable cooking utensils.

3.Overload: If the induction cooker is overloaded, it will not be able to heat normally. Check whether the rated power of the induction cooker matches the power of the power supply used to ensure that no overload is generated.

4.Circuit board problems: If the circuit board is damaged, it will cause the induction cooker to not work properly and cannot be heated. At this time, it is necessary to contact the after-sales service for repair or replacement parts.

In short, no matter what the reason, once it is found that the induction cooker does not heat the Zipei, it should be stopped in time, find the cause and carry out trace maintenance to ensure its normal operation.

Summary. Hello! The reasons and solutions for the failure of Huabao gas water heater to ignite, 1. There is no gas source

Natural gas in some areas needs to be recharged before it can be used, sometimes I don't notice that there is no balance in the card, so there is no natural gas directly, of course, when you turn on the faucet, you can only hear the sound of Huabao gas water heater ignition, but it can't catch fire, and you can't get hot water. 2. Power failure: If the Huabao gas water heater with a battery is used, first check whether the battery is too old, and the voltage is not enough will also cause the gas water heater to not catch fire; If the AC power supply is used for a strong discharge type, check whether the power switch is loose.

Check whether the AC power plug indicator is on, and rule out the cause of power supply first.

Hello! The reasons and solutions for the failure of Huabao gas water heater to ignite, 1. No gas source: natural gas in some areas needs to be recharged before it can be used, sometimes there is no balance in the card, so there is no natural gas directly, of course, when you turn on the faucet, you can only hear the sound of Huabao gas water heater ignition, but it can't catch fire and can't come out of hot water.

2. Power failure: If the Huabao gas water heater with a battery is used, first check whether the battery is too old, and the voltage is not enough to cause the Yuxiaopi gas water heater to not catch fire; If the AC power supply is used for a strong discharge type, check whether the power switch is loose. Check whether the AC power plug indicator is on, and first rule out the cause of the power supply side.

3. Electric igniter failure: If one of the pulse igniters and controllers fails, the gas water heater cannot be ignited normally. The solution is to first check if there is a problem with the pulse igniter or controller.

Once the problem part is identified, replace the problem part. 4. Ignition porcelain needle or induction porcelain needle problem: ignition needle offset or aging:

Causing difficulties in ignition of gas water heaters. The solution is to replace the aging ignition needle or place the ignition needle correctly; Induction aging, the induction can be polished and placed. 5. Solenoid valve failure:

If you only hear the ignition sound and not the clicking sound when using the water heater, it is likely that the solenoid valve of the gas water heater is damaged or aging, resulting in the solenoid valve being out of control. This can be done by replacing an aging or damaged solenoid valve. 6. The smoke pipe cannot be exhausted normally

The smoke pipe may be clogged, and the pipe should be removed for cleaning, or the pipe is not properly installed. 7. Water-air linkage device is troubled: the tympanic membrane grip core in the water-gas linkage valve is aging or damaged, and the micro switch cannot be pushed, and a new one needs to be replaced.

8. Low water pressure: The water pressure is not enough during the peak period of water consumption, which is also one of the reasons why the gas water heater cannot catch fire, and this reason is relatively common. 9. The gas type does not match:

For example, if the liquefied gas water heater is connected to natural gas, the liquefied gas water heater needs to be changed to natural gas before it can be connected and used. 10. Blockage of the filter screen at the water inlet: it will cause the cold water to not enter the gas water heater normally.

The solution is to clean up the blockage of the filter at the inlet.

If the situation is more complicated, it is recommended to ask the manufacturer or a professional to overhaul.

Hello! The above are the reasons why Huabao gas water heater cannot be lit and the solution.

Hello dear, what is the reason why the Huabao gas water heater cannot be lit; One of the reasons why the gas water heater of the bridge does not catch fire: the solenoid valve is faulty. Phenomena that appear:

If only the ignition sound is heard during ignition, and there is no magnetic sound of the solenoid valve "clicking", it may be that the solenoid valve is damaged or aging. If the solenoid valve is aging, it can be sucked at the beginning of the ignition, and the fire will be ignited, but then the ignition will be extinguished again. It may also be that the gas pressure is too high or too low, and the water heater using cylinder gas will have the pressure of the cylinder pressure reducing valve to slow out the pressure is too high or too low, resulting in the water heater cannot be ignited.

It is also possible that the solenoid valve is dirty. If the solenoid valve cannot be overgased, the gas will not come out, so that it will not ignite. Before confirming the failure of the solenoid valve, it is necessary to confirm whether the ignition control circuit is normal, and if there is a fault, it cannot control the solenoid valve to suction.

Solution: Check the elimination method one by one to determine the specific cause. If the solenoid valve is aged, replace the solenoid valve.

If there is a problem with the gas pressure, replace the gas cylinder with a new one. If there is any swag on the gas valve, clean it up. If the ignition control circuit, the circuit problem is repaired.