Optical drive professionals, please enter, 280 points reward!

Nowadays, the ordinary optical drives on the market are not very good in quality. In particular, it refers to the quality of the main chip of the optical drive.

It's especially easy to break... By the way, I have been engaged in optical drive maintenance for more than 3 years) 1, your optical drive has no response after a month of taking it The reading disk is unstable, which means that the quality of the optical drive you bought is indeed very bad. . .

2. You rub the laser head with alcohol, but there is no reaction at all. Ninety-nine percent of the time, you get the laser head scratched because it's a very fragile, sensitive piece of hardware.

And the computer you mentioned has an icon in it, which means that your optical drive is installed fine.

The pop-up of the right mouse button can only indicate that your optical drive is functioning normally.

The indicator light is on, but it doesn't mean anything!

So I'm almost certain to tell you that your optical drive is broken!!

The previous reading disk was unstable, and I judged that the biggest possibility was that there was a problem with the main chip.

And after that, I'm almost certain that you've scratched the laser head!

Fortunately, the optical drive is not expensive now. Let's change it. If it's still under warranty, congratulations!

If not, I suggest you don't fix it either, it's not interesting to repair things now!

No store will repair it, and they are not happy to fix it!

If you are willing to repair, you will also decide to simply buy a new one because of the problem of **!

Oh, if I'm satisfied with you, please give me some pen and ink! Thank you.

It is estimated that the bald head is damaged, so it is recommended to buy a disc dedicated to cleaning the bald head and try it. If the bald head is really broken, it is generally impossible to repair it, and it can only be replaced directly. But in that case, the cost is too high, at least 80 yuan, it is better to buy a new one.

The disc drive spring is broken.。。。 Only to change or send it for repair.

If there is a problem with the disc, try it on a different disc.

It's obvious that the bald head is broken, change the bald head

You're much better than me, I cleaned the motherboard and the boards with medical alcohol (not anhydrous alcohol), and now the computers are scrapped.

See if the pin header is bent.

If you don't know how to move, I can only wish you good luck.

1.Launch"Registry"(。

2.Find the values for upperfilters and lowerfilters in the registry key:

3.Remove the UpperFilters and LowerFilters values.

4.Exit"Registry"。Remarks:

After removing the UpperFilters and LowerFilters values, you may need to reinstall a particular program, such as CD recording software, if you notice that the software is missing functionality.

5.Restart your computer.

6.If you haven't found it, you can unplug the drive and put it back on, sometimes due to poor contact.

1 Unplug it and put it back on and see if it works.

2 win7 find the driver.

Select the optical drive in the Device Manager, right-click and select Update Driver. Select Manual Find selection from the list. Select the original one.

Not looking from a cd. You follow the steps I said. I'm asking you to restore the driver to its original one. In fact, your computer has already recorded the good one.

The optical drive driver is uninstalled, or simply deleted, and then the driver wizard is re-clicked

No need to reinstall the system Reinstallation is a simple and practical way

There is a small eye on the panel of the optical drive, poke that eye with a straight paper clip to see if it can pop out, if not, it may be that the optical drive is broken.

You look for it on the disc drive panel, have a small eye, find a paper clip and poke the spring inside, so that the disc drive can open on its own, and it will be normal in the future, if it is still broken, then maybe the disc drive is broken.

Take the drive off and take it apart.

Take the computer apart and turn it back on!!

Let's change it first! Repairing it is almost the same as buying a new one!

You can choose the pioneer of the optical drive, the light sculpture is a new technology, and I personally think it is useless.

It may be due to system reasons, you can try to reinstall the system and repartition, but the files in the hard disk partition must be backed up.

What system do you have installed, take a look at the book with the system divider.

You take a look in the device manager.,If you don't, you use Master Lu software to detect something on your computer.,There's a problem.。

It has the function of expanding the recognition range of the computer, because the disc is generally safer and more convenient, and the memory is large.

The optical drive is used to put discs! Read the contents of the disc.