The waterproofing upstairs is not done, and the downstairs becomes a water curtain hole , how to do

If the waterproof facilities upstairs are not done, then it is very disturbing for the residents downstairs, and some people laugh and say that their homes are going to become water curtain holesTherefore, when decorating at home, we must pay special attention to these aspects.

The first is the choice of waterproof materials, there are many waterproof materials on the market now, so you must choose a more professional designer to choose waterproof materials for the family, and this is a thing that can not be stingy with cost, the hard decoration at home is done, and the soft decoration can be more comfortable. The whole two choices are cost-effective, especially the waterproof materials with good quality, and you must not cut corners and save costs here.

Especially in the bathroom, the kitchen, which is easy to seep and leak, should be waterproof twice as much as possible, so as to reduce the poor waterproof facilities upstairs, resulting in the occurrence of the phenomenon of water curtain holes in your homePay attention to pipes, corners and joints, as these are the most likely areas to leak.

At the end of the hard installation, be sure to do the closed water test, as well as the leakage testAt this time, the upstairs neighbors need to cooperate, and then carry out soft decoration when the hard decoration is undoubted, otherwise it is very troublesome to rework, so this step must not be saved, and the waterproof project must be built when decoratingThen proceed to the next step of construction, otherwise it will definitely cause trouble in the future.

Neighbors should understand each other, and when decorating downstairs, they should also give a high degree of cooperationIn fact, this is the best of both worlds, and if the waterproofing project is done well, both families will benefit, and it will also enhance the harmony between neighbors.

Home decoration to do waterproof, these 5 points on your snack!

1. What materials should be used for home waterproofing:

There are many kinds of waterproof materials, including JS composite waterproof materials, acrylic waterproof coatings, polyurethane waterproof coatings, cement mortar and other waterproof coatings.

Among them, polyurethane waterproof coatings have the best waterproof performance, but there are many counterfeit products on the market, and the quality of counterfeit products is not up to standard or environmentally friendly, so you need to buy carefully. Acrylic and JS composite waterproof materials are more common, with good environmental protection and high cost performance, so it is recommended to use. Although cement mortar saves money, it is not suitable for the decoration of new houses that may have settlement.

Second, where do you need to do waterproofing:

Bathroom walls and floors need to be waterproofed, which goes without saying, and I personally recommend that the kitchen and balcony floors should also be waterproofed, just in case.

3. Waterproof construction process:

Waterproofing should be done after hydropower renovation and before tile paving, try to choose sunny weather to do (so that the waterproof coating dries faster) The basic process of waterproofing is: cement leveling - the first layer of waterproofing - cross painting the second layer of waterproofing - the corners of the brush waterproof - closed water test - laying cement mortar protective layer.

4. Precautions for waterproof construction of toilets:

1. The waterproof bathroom floor should be brushed with more than 2 layers, and the waterproof horizontal and vertical crosses should be painted twice, so as to ensure that the application is uniform and no omission is left.

2. The waterproofing of the bathroom wall should be more than one meter.

3. The interfaces, corners, and wall joints between pipes and walls and floors are particularly prone to leakage, so flexible waterproof brushing should be done.

4. It is recommended that the bathroom door stone is 5 10 mm higher than the bathroom floor, so as to intercept the water, and the door stone should also be waterproof, and many people have missed this place.

Fifth, the closed water test must be done:

After the waterproof layer is dry, the water level should be marked in the bathroom with a height of more than 200mm, and the observation will be more than 24 hours. The upstairs neighbor just didn't do this step and hurt my family!

The waterproof project is not only a matter of their own family, but also affects the lives of the neighbors downstairs. Therefore, we should not take chances, and we must do a good job of waterproofing before proceeding to the next step of construction.

When using mortar waterproofing agent to do waterproofing in the bathroom, then you need to apply plain mortar first, and then wait for 20 minutes before applying waterproof mortar, if you use waterproof paint, you need to apply a layer of waterproof paint first, and then wait until the surface is dry and then apply it vertically for a second time. The perimeter of the sewer pipe must be blocked and waterproof.

First of all, when decorating, we must do a good job in the decoration of the floor, and the cement mortar is more suitable for the parts with stable structure, and it is non-toxic and harmless.

There are two aspects, one is that the bathroom waterproofing is not done well and leaks downstairs. The other is that even if the bathroom is waterproof well and does not leak under the water, it is a problem with the waterproof layer.

Especially in the bathroom, the kitchen, which is easy to seep and leak, do the waterproof material twice as much as possible, so as to reduce the poor waterproof facilities upstairs, resulting in the occurrence of water curtain holes in your home, especially for pipes, wall corners and wall joints, these important parts pay more attention, because these places are the most prone to water leakage.

Cement mortar is suitable for the part of the structure is relatively stable, it is non-toxic, harmless and pollution-free, can be directly constructed on the concrete surface, and the bond is firm, and the tile can be directly paved on it after two hours of construction. The disadvantage is that the film lacks elasticity after formation, which will affect the waterproof performance due to the dislocation or settlement of the building.

We must do a good job of decorating the floor, which can play a waterproof role.

If there is water seepage in the floor-to-ceiling window, we need to clean the perimeter of the window frame, find the leakage gap, and analyze the cause of the leakage;

The parts with cavities inside the wall need to be chemically grouted or filled with other elastic waterproof materials according to the specific situation;

Clean the surface of the gap between the floor-to-ceiling windows, and keep the surface free of oil, floating and sinking and other isolators.

From experience, the leakage of the toilet must be caused by the collection of water at the bottom of the bathroom, and finding the cause of the water collection is the most important thing. This can be addressed in two ways. If the water supply and drainage pipes are fine, then the water collection is left by the workers during the renovation construction.

Drilling to drain the water collection is instinctive. If the water collection is caused by the leakage of the water supply pipe, the general owner will choose to redo the bathroom, of course, it can also be solved by the water supply pipe through the open pipe, but it is not beautiful. If the water collection is caused by a leak in the drainage pipe, and the waterproofing of the bathroom is not done well, this situation will inevitably have to redo the bathroom, and there is no choice.

Judging whether the pipeline is leaking is simply the water supply pipe pressure method and the drainage pipe dyeing method. The specific operation depends on the maintenance experience of the plumber.

The window sill is installed separately, and the waterproof and leakage proof agent is supplemented, and the original waterproof glue is dug out of the outdoor part and re-marked with waterproof glue. Leak-proof in the bathroom and kitchen. The reason for leakage is that the waterproofing is not done well, and the method of leakage prevention is:

Before decoration, carefully check whether there is leakage in the kitchen and bathroom on the upper floor, and if there is, you should first do the waterproof project upstairs before decorating. If there are no occupants on the upper floor for the time being or for other reasons, the waterproofing works on the upper floor cannot be treated for a while, measures should be taken to remedy the situation: apply polyurethane to the bottom of the leaking part, but the plastering layer of the leaking part should be disposed of and the base layer should be dried.

When decorating the kitchen and bathroom, if the original wall and floor tiles are removed and redecorated, regardless of whether the original waterproof layer has been made, the waterproof layer should be redone before re-pasting the wall and floor tiles, and the waterproof layer of the surrounding side walls is 200mm high. Be sure to do a good job of waterproofing upstairs, and so onstairs waterproofing, after the decoration is done, otherwise leak downstairs, if the ceiling is latex paint white, it must be scraped again, and the lamps and lanterns also need to be removed, if it is leaking to the kitchen and bathroom, it is particularly troublesome, so it is necessary to make the upstairs waterproof.

When building a building, the developer has done waterproofing, but it is likely that the garbage products used do not meet the national standards, and they can continue to find the property, which is the responsibility they must face, the state stipulates that the water quality warranty period of the building must be ten years, and the developer will withhold the warranty money of the material supplier when selecting the materials, so this situation is all the responsibility of the property. If the upstairs neighbors do not cooperate or do not repair in time, the damaged owner can follow the relevant regulations: "The adjacent parties of the immovable property shall correctly handle the adjacent relationship in terms of water interception, drainage, passage, ventilation, lighting and other aspects in accordance with the spirit of conducive to production, convenient life, solidarity and mutual assistance, fairness and reasonableness."

Where obstructions or losses are caused to neighboring parties, the infringement shall be stopped, the obstruction removed, and the losses compensated. "Take the dispute to court.