My Huawei phone is telecom and mobile, how can the data not be converted

If you buy a telecom dual-mode mobile phone, then the mobile phone can only support telecom data networks. Mobile data is not available.

There are two reasons for this.

1.If the button to switch mobile data is grayed out, both cards may not be turned on, and it is recommended to turn on both card 1 and card 2.

2.If it is turned on or can not be switched, it may be that the mobile phone is a customized version of the full Netcom mobile, according to the latest policy requirements of China Mobile, the mobile full Netcom version of the mobile phone, requiring the mobile 4G card to be given priority when using dual cards, that is: when inserting a mobile card and a non-mobile card, the mobile card is defaulted as the 4G Internet main card, not switchable to a non-mobile card, and another non-mobile card as a secondary card can only be used to call** and send text messages.

If you need to use the data traffic of China Unicom or China Telecom card, you can temporarily disable the mobile card.

The default mobile data in the dual SIM management in the Huawei phone settings is gray, and what should I do if I can't click and can't switch the data?

It is possible that the phone does not support telecommunications.

What should I do if the telecom card traffic card is not switchable?

Why can't card 2 be connected**.

Impossible. My mobile phones and tablets are all Huawei brands, and as long as I don't turn on the data connection, I will never take a little traffic.

There is still no restriction on which link is in place.

Unless you're using wifi with a broadband connection, your phone is mobile. This mobile traffic is not necessarily China Mobile's, but refers to the data traffic generated when you use the operator's network to access the Internet through your mobile phone. Operators in China are commonly referred to:

China Telecom, China Mobile, China Unicom. In addition, when you use your mobile phone, you should make sure that your mobile phone has been connected to wifi, if it is not connected, or the connected wifi is not connected to the network, the mobile phone will automatically switch to the mobile data network, thus generating mobile data traffic.

This may be a problem with your settings, when you set up the network again, you didn't choose to switch manually, he just turned on the first time, there is a main card, a secondary card, he Coco preferentially uses a card's network, if you set the jitter for debugging, which card is mainly used, this can be set.

The default data connection of Huawei Telecom phones is China Telecom, and if you want to switch from China Telecom to mobile, you must first disable the China Telecom data network before you can use mobile data.

In the "Settings" section of the main menu page

3.Turn off the telecom data in your phone and then select Mobile data.

Telecom version of the dual-SIM dual-standby phone, the default connection of the mobile phone uses card slot 1 telecom data traffic.

Connect using card slot 2

For the data traffic of the mobile phone card of China Mobile or China Unicom, the network connection of the telecom mobile phone card in slot 1 must be disabled in order to connect to the data traffic connection of the mobile phone card or China Unicom.

The steps for Huawei Mobile Data Switching Card 2 are as follows:

1.Turn on your phone, swipe the desktop to find your phone's "Settings", and tap the settings icon to enter the settings interface.

2.In the list of settings, select the "Wireless & Network" option above.

3.After entering, then we click "Dual SIM Management" in the page to enter the dual SIM management page.

4.In dual card management, we click on card 2.

5.After clicking on Card 2, a reminder will pop up at the bottom of the page to inform you that the data traffic will switch to Card 2. Let's just click on the "Switch" option below. This solves the problem of Huawei mobile phone data switching card 2.

Here's how:

1. First find the settings of your phone;

2. Then select Dual SIM and Mobile Network in the settings;

3. After entering, you can see that the mobile phone data is turned off by default, and select to turn on the data;

4. After opening the data, you can see that the card that uses the data by default is my telecom card, and switch it below;

5. Click on the data row, you can see the screen shown in the figure below, select another card, that is, the mobile card, and click to confirm to see that the default data card has been replaced with a mobile card.

1. Swipe the desktop to find the "Settings" of your Huawei phone.

2. In the settings list, select the "Wireless & Network" option above.

3. After entering, then we click "Dual SIM Management" in the page to enter the dual SIM management page.

4. In Dual SIM Management, you can see which card is used for the default mobile data traffic. Click on "Card 2".

5. After clicking on another card, a reminder will pop up at the bottom of the page to inform you that the data traffic will switch to card 2. We click on the "Switch" option below.

6. After switching, the mobile phone will temporarily have no network status, and the card will re-register the network. After the registration is completed, you can see that Card 2 has generated data in the signal bar of the Huawei phone, and the switch is complete.

For the full Netcom version of the phone, click Settings - Dual SIM Management - Default Mobile Data, and select Card 2.

When a mobile and non-mobile card is inserted at the same time, it cannot be switched, and the mobile card can only be temporarily disabled to use the data traffic of the non-mobile card.

Prefer the point setting, then the wireless and network; Find Dual SIM Management, then find the default mobile data, and finally click Card 1 or Card 2, and it's OK to switch arbitrarily.

For the specific method of switching the data traffic of Huawei mobile phone to card 2, you can take a look at the data in the settings.

First of all, open the phone and go to (Settings) and click (Dual SIM Management), and then click to switch the default mobile data to Card 2. Hope it helps.

Go to "Settings", click "Dual SIM Management", and click to switch the default mobile data to card 2.

Settings - Dual SIM Management - The default mobile data setting is Card 2

Click Settings, SIM Card Management, and select Card 2 under Default Data.

Method: Click Settings - Dual SIM Management - Default Mobile Data and select another card.

The specific method of switching between the two cards is as follows:

1.First, open the settings menu page of your phone and select SIM card management.

2.In the "Default Settings Bar" under the SIM card management page, you can see that there are voice** and data connections for selection.

3.Let's turn on Voice** first and switch on the pop-up board.

China Unicom and Mobile switch mode into the following:

1.Open the data connection first, and check China Unicom on the pop-up panel.

2.If you go back to the previous step, you can see that both the voice** and data connections have been successfully switched.

How to switch the traffic of Huawei mobile phones.

Hello, this situation should be that your Huawei mobile phone is a mobile phone with a full Netcom version, and the mobile phone with all Netcom cannot use the data network when the mobile phone card is installed, and the telecom mobile phone card can use the 4G data network normally after removing the mobile phone card.

Waiting for leisure to know the east wind side, thousands of purples and thousands of reds are always spring.

Huawei Glory 5 mobile phone, this mobile phone,If it's full Netcom,It only has one card in the order,If you say this, you have to read the manual,Or if you look at this to this online to see this mobile phone,Uh,Parameters, let me see what kind of requirements this card 1 and card 2 have,Isn't it? Card one is Unicom and Telecom, ah, hundreds of thousands of Carls can only be used, this telecom's hundreds of thousands, if you put the card of card 2, the card of Telecom to card one, at this time it is ah, there is a design network that can not be recognized, so you look at the data of this meal card, and the card of a card is reversed.