-
Dmv. It is possible to inspect the car. Vehicle control vehicle inspection matters:
1. During the annual inspection, it will be tested whether the vehicle exhaust gas detection is qualified, that is, the oxygen sensor and the three-way catalytic converter.
Their optimum operating temperature is 400 to 800 degrees Celsius.
Therefore, it is recommended that car owners start the vehicle in advance in the external inspection area for preheating when carrying out the exhaust gas line detection. will increase the pass rate!
2. Before the annual inspection of the car, the car mainly cleans the body in advance, and the cleaning of the vehicle body, engine compartment and chassis in advance can provide convenience for the inspectors and is also conducive to passing the annual inspection.
3. The vehicle management office will check the lights of the vehicle. If the vehicle is found to have too dim or too strong lights, it will be considered unqualified and will not pass the annual inspection. It is recommended to restore the condition of the original headlights before the annual inspection to pass the inspection.
4. The braking performance of the vehicle is one of the most important indicators of vehicle safety, and it is a project that must be checked during the annual inspection. So, brake fluid.
As well as brake pads are two areas to focus on.
-
Cars with less than seven seats are exempt from inspection for six years, and once every two years, you can directly get an annual inspection certificate, and then go online for more than six years.
-
Hello, the new car is inspected within 6 years and 2 years, and it is inspected in the vehicle management office. With the vehicle owner's ID card, driving license, strong insurance policy within two years, vehicle and vessel tax bill, you can directly apply for the annual inspection sticker at the vehicle management office, and there is no need to check the car online.
-
Hello, family car non-operating vehicles 7 seats below the new car is not required to inspect the car online, 2 years another annual inspection form, the sixth year only need to inspect the car, there is a special car inspection company.
-
Generally speaking, it is exempt from going online within six years, as long as the traffic police brigade receives the sign of annual examination, and you can go to the vehicle management office for annual inspection after six years.
-
Generally speaking, if you inspect the new car, it is basically a 4S shop for a car inspection, if you are licensed, it is at the DMV.
-
Hello, is it a new car license plate inspection or annual inspection? If you don't need to inspect the car online within six years, you can just take the certificate and replace it!
-
The license plate of this new car does not need to be inspected, and the first six years after the license plate is less than 7 seats can be obtained every 2 years to receive a vehicle qualification mark.
-
Hello, the new car 7 seats do not need to be reviewed online. It's a two-year trial of the car, and there is no need to go online.
-
Generally, the car does not need to be tested online within six years, and you can go directly to the vehicle management office to replace the annual review label.
-
Hello, the new car can go directly to the vehicle management office to inspect the car, and it will be exempted from online inspection within six years, just take a look.
-
1. What things are inspected by the vehicle management office?
1, the vehicle management inspection of the vehicle inspection of heavy and medium-sized trucks are inspected dimensions, curb weight, side and rear protection devices, body reflective logos and vehicle tail sign version, tire wear and other items, strict inspection of large and medium-sized passenger car speed limiting devices, dynamic monitoring devices, seat belts, emergency exits, tires and other items.
2. Legal basis: Article 2 of the "Opinions on Strengthening and Improving the Inspection of Motor Vehicles".
Strict implementation of motor vehicle inspection standards. Inspection agencies to strictly implement GB21861, and large and medium-sized buses, heavy and medium-sized trucks as the focus of inspection, strict inspection of heavy and medium-sized trucks dimensions, curb weight, side and rear protection devices, body reflective signs and vehicle tail sign plates, tire wear and other items, strict inspection of large and medium-sized passenger cars speed limiting devices, dynamic monitoring devices, seat belts, emergency exits, tires and other items, enhance the effectiveness of inspection work in the source of prevention of major traffic accidents. The maximum allowable detection amount should be verified in strict accordance with the inspection time specified in GB21861.
It is necessary to improve the professional level of large and medium-sized automobile inspection, and implement the use of automatic measuring instruments for the overall size of vehicles and other scientific and technological equipment in the large and medium-sized automobile testing line.
2. What materials are needed for vehicle inspection by the vehicle management office?
1. Original driving license;
2. A copy of the compulsory traffic insurance;
3. The People's Republic of China Organization ** Certificate (with fresh seal);
4. Power of attorney (stamped with fresh seal);
5. A copy of the ID card of the ** person;
6. Vehicles.
-
1. You can go to the local vehicle management office for car inspection.
2. Get the vehicle annual review form in the service hall, fill it in according to the regulations, and paste the rubbed frame number and engine number. Sign the owner's name at the owner's signature.
3. Drive the vehicle to the external inspection window, park it in order, and prepare the inspection form and driving license. Wait for external inspection.
4. After the completion of the external inspection (refers to a pass.) If there is a change of number, change of engine, change of appearance, dirty engine compartment, do not carry an emergency stop sign [that is, a tripod], fire extinguisher, covered with sunscreen film, etc., it will not be able to pass the external inspection smoothly at one time).
5. Drive the vehicle to the initial inspection lane, park it in order, and wait for the initial inspection of the vehicle to go online.
6. After the initial inspection is off the line, go to get the printing results, and repair them according to the unqualified items printed. Of course, you must ask them to repair it carefully, because there is still a re-inspection waiting for you.
7. After repairing, repeat step 2.
8. After completion, drive the vehicle to the re-inspection lane, park it in order, and wait for the vehicle to be re-inspected online.
9. After completion, go to the service hall to pay the money, vehicle inspection fee, initial inspection online fee, re-inspection online fee, and external inspection fee.
10. Then, the last step: the original and copy of the vehicle insurance policy, the copy of the owner's ID card, the driving license, the receipt of payment, etc., are handed over into the window, and wait for the printing of the label that has passed the annual examination.
-
Check that the car is dislodged. Go to your local DMV to check your car. The precautions for Hongshi's in the vehicle inspection are as follows:
Start the vehicle early to warm up:
During the annual inspection, the vehicle exhaust gas detection will be checked to see if it is qualified, that is, the oxygen sensor and the three-way catalytic converter. And their optimal working temperature is 400-800 degrees Celsius, so it is recommended that the owner start the vehicle preheating in the external inspection area in advance when conducting the exhaust gas ** test.
Clean the body in advance:
Before the annual inspection, it is mainly to talk about cleaning the body in advance. Cleaning the body, engine compartment and chassis in advance can provide convenience for inspectors and help them pass the annual inspection.
Check the lights in advance:
The DMV will check the lights of the vehicle. If the light of the inspected vehicle is too dim or too strong, it will be regarded as unqualified and cannot pass the annual inspection. It is recommended to restore the original headlight condition before the annual inspection to pass the inspection.
Millions of car purchase subsidies.
The process of a new car inspection is:Inspect the paint for scratches, spots, dents and abrasions; >>>More
The annual conscription time will not change basically, online registration will begin in June, as of October 31, the state will issue a conscription mobilization order in October, and issue relevant requirements and indicators for conscription (at this time to know what soldiers are recruited in various places), the conscription points will begin to register, and the cadres who will receive the troops will go down to the districts and counties in November to begin to receive the political examination, visits, and physical examinations related to the work, and on November 20, the whole country will begin to transport recruits into Tibet, and on December 10, the whole country will ship other recruits, and all the transportation will be completed before December 20. >>>More
If you want to remove formaldehyde and odor from a new car, it is very important to use the right method, formaldehyde as a toxic gas, it has always been among the best, long-term contact with great lethality, so it is urgent to buy a new car to remove formaldehyde, should be carried out immediately, the following is recommended for you to remove several aldehyde tips, I hope your new car as soon as possible to remove formaldehyde. >>>More
The main reason for the factory inspection of a new car is to apply for a motor vehicle license plate before it is licensed. >>>More
Open the window for ventilation, which is the most convenient way, and open the window for ventilation when driving. >>>More