The switch of the wall hung boiler always jumps by itself, what s going on

The switch of the wall-hung boiler always jumps by itself because the electrical load is too large.

The wall-hung boiler has a variety of safety protection measures such as anti-freezing protection, anti-dry burning protection, accidental flame-out protection, over-temperature protection, and anti-jamming protection of water pump. The gas wall-hung boiler has a powerful home heating function, which can meet the heating needs of multi-bedrooms, and each room can be set at will to set a comfortable temperature according to the needs, and it can also be decided to turn off the heating in a room separately according to the needs.

1.Leakage between components and casing: check to eliminate or replace components;

2.The heating element and the temperature sensitive switch probe are directly thermally conducted by metal, if the heat conduction is too fast or too high, malfunction will occur!

3.Failure handling of either leakage protection plug and temperature-sensitive switch: replace temperature-sensitive switch or leakage protection plug;

4.If the insulation performance of the heating element is reduced, the leakage protection plug will be dealt with immediately: check and eliminate or replace the heating element;

5.The leakage protection plug is in poor contact with the inferior socket, and the malfunction occurs due to overheating.

The general process starts from discovering the problem and raising the problem, and after discovering the problem, make assumptions about the answer to the problem according to their existing knowledge and life experience Design the first plan, including the selection of materials, design methods and steps, etc. After reaching a conclusion, it is also necessary to reflect on the whole process of the general methodological steps of the experiment: asking questions, making hypotheses, making plans, implementing plans, drawing conclusions, expressing and communicating

The most commonly used methods in science include observation method, experimental method, investigation method and data analysis method

Observation is a basic method of science Scientific observation can be made directly with the naked eye, with the help of magnifying glasses, microscopes and other instruments, or with the use of cameras, video recorders, video cameras and other tools, and sometimes it is also necessary to measure Scientific observation should have a clear purpose; Observations should be comprehensive, meticulous, and realistic, and recorded in a timely manner; Be planned and patient; Think positively and record in a timely manner; To exchange views and discuss The design of the experimental protocol should be carried out closely around the questions and hypotheses raised When studying the influence of one condition on the research object, the experiment carried out under the same conditions except for the different conditions is called a controlled experiment General steps: find and ask questions; gather information related to the issue; make assumptions; design of experimental protocols; Conduct experiments and record them; analysis of experimental phenomena; Conclusion Investigation is one of the common methods of science When investigating, we must first clarify the purpose of the investigation and the object of the investigation, and formulate a reasonable investigation plan During the investigation process, sometimes because the scope of the investigation is very large, it is necessary to select a part of the survey objects as samples During the investigation process, it is necessary to record truthfully The results of the investigation should be sorted out and analyzed, and sometimes the statistical methods should be used to collect and analyze data is also one of the common methods of science There are many ways to collect information Go to the library to consult books and newspapers, and visit relevant people, The form of information includes text, data, and audio-visual data, etc., and the information obtained should be sorted out and analyzed, and answers and clues should be found from it.

There are two situations when the household power supply trips, 1, it is due to excessive electrical load, which causes the wire to heat up to the limit, and the power supply switch starts to protect and trips. 2. In the case of leakage and short circuit of household appliances or wires, the power supply will trip. At this time, it is recommended to find a property or professional to inspect the door, and you can't operate blindly.

I don't quite understand, is it the switch at home that trips after turning on the wall-hung boiler, where there may be a short circuit.

Your question is not detailed enough, try to change the high-power switch and see if it works'

Hello, dear, I've kept you waiting, and now I'll answer for you. The reasons why the electric wall-hung boiler has been tripping are as follows: the leakage protector of the wall-hung boiler is damaged, which causes the wall-hung boiler to trip; Replace the leakage protector of the wall-hung boiler.

The current of the wall-hung boiler is too large; There is a problem with the temperature control system of the wall-hung boiler, which cannot automatically cut off the power, and the wall-hung boiler is directly in the heating state, causing the wall-hung boiler to trip. Improper installation of wall-hung boiler; If the lead wire of each Weizhiqin joint is not firmly connected and loosened for a long time, it will slow down the heating and oxidation of the joint, burn out the outer insulation of the wire, and emit sparks and burnt smell, resulting in undervoltage of the line and air switching. Wall-hung boiler or line leakage, short circuit; When you find that the wall-hung boiler used is leaking, immediately unplug the wall-hung boiler.

There are two situations when the household power supply trips, 1, it is due to excessive electrical load, resulting in the heating of the wire reaching the pole touch grace, and the power supply switch starts to protect and trips. 2. In the case of leakage and short circuit of household appliances or wires, the power supply will trip. At this time, it is recommended to find a property or professional to inspect it, and you can't blindly operate it.