About the content of Subject 2 and related issues

Subject 2 includes the inside road and the pile test, the pile test is compulsory, the inside road includes: ramp fixed-point parking and starting, (mandatory) side parking (mandatory), crossing a unilateral bridge, curve driving, right-angle turning, speed limit through the width limit gate, passing through continuous obstacles, 100 meters plus and down gears, undulating road driving.

I don't know if you're **, Beijing is now taking the test together with the pile, and you can only go to the test road after the pile. Because the test is completed in one and a half days, the time is relatively tight, and now in addition to the 2 compulsory items in the exam, the examiner generally only tests some simple operations, such as right-angle turning, curve exercise, and a maximum of 100 meters.

Pickup trucks are supposed to be heavier than Santana or something, but in fact, coaches are heavy. But it's all the same, as long as you remember the essentials and points.

I just got this too, don't worry, when I took the exam, I found that the existing men are not as good as our women!

There are no good cars in driving schools, they are all broken cars, so it would be good to practice more and master the essentials and habits.

Regulations on the Application and Use of Motor Vehicle Driver's Licenses".

Article 24 The test subjects are divided into road traffic safety laws, regulations and related knowledge test subjects (hereinafter referred to as "subject 1"), field driving skills test subjects (hereinafter referred to as "subject 2") and road driving skills test subjects (hereinafter referred to as "subject 3"). The order of the examinations is according to the subjects.

1. Subjects. 2. Subject 3 will be carried out in turn, and only after passing the examination of the previous subject will you be allowed to take the examination of the latter subject.

Subject 1 is the theory test after passing the car should be practiced, 40 days after the test subject 2 and subject 3, that is, the pile test and the road test, but these two items contain a lot of content, but generally do not test so much content.

Pile test: ramp fixed-point parking and starting, side parking, passing unilateral bridges, curve driving, right-angle turning, speed limit through the width limit gate, passing through continuous obstacles, 100 meters plus and down gears, undulating road driving.

Road test: getting on the bus, starting, driving in a straight line, changing lanes, passing an intersection, pulling over, passing a pedestrian crossing line, passing a school area, passing a bus stop, meeting a car, overtaking, making a U-turn, driving at night.

There are five main contents at the beginning of subject 2:

1. Reversing into storage:

Reversing into the warehouse is more practice in the course of the subject 2 exam, and it is also a subject that students think is more difficult in the subject 2 exam. Before preparing to enter the garage, the trainee can look at the garage sideline from the rearview mirror to determine the angle of the steering wheel when reversing. The body should be kept meters to meters away from the sideline, and the front of the car should start to reverse slowly with infrared light.

The vertical lining of the triangular window on the right side of the rear door should coincide with the upper right corner of the yellow edgeline, and the direction can be reversed into the garage.

2. Side parking:

Side parking is a more commonly used technology in the daily driving process, the vehicle is driven to the front of the garage parallel to the forward direction, and then reverses to the right rear into the garage, there can be no pause in the middle, as long as the side parking in this range does not pass the edge of the storage position, it is considered to pass. It is important to note that you will fail the stop-in test.

3. Fixed-point parking for uphill start:

When the car is parked on the ramp, in order to prevent the car from slipping, the handbrake will be tightened, and then the process of starting acceleration and passing the ramp in the ramp is the test of ramp start. Points will also be deducted for slipping.

4. Right-angle turning:

When making a right-angle turn, you need to control the speed of the car, use low speed according to the prescribed driving route, and make a 90-degree sharp turn through the right angle without stopping. If you fail to turn a corner, or if you stop the engine in the middle of the game, you will be deducted points. When turning at a right angle, pay attention to the angle of the car and try to stay on the side of the road, so that it is easy to pass.

5. Curve driving:

The subject of curve driving requires students to have a certain sense of driving, and the vehicle is driving on the S-shaped road surface of the specified width, and the road edge line is not allowed to be squeezed, and the direction is used freely. The purpose is to train the motor vehicle driver to use the steering and master the wheel trajectory skills, and it will be easier to master the car feeling.

Hello, subject two includes reversing into the garage, side parking, right-angle turning, turning over the S bend and half-slope start, the order of each item is different in the order of each test room, but there will be a distance between each item in the exam can be stopped and waited without turning off the ignition, if you are nervous during the exam, you can adjust your mentality in this distance. Hope, thank you.

Reversing into the garage, side parking, right-angle turning, parking and getting cards, curve driving, uphill start.

The subject 2 exam is mainly divided into five items: reversing into the garage, side parking, curve driving, right-angle turning, ramp fixed-point parking and starting. Regardless of whether you are learning manual transmission (C1) or automatic transmission (C2), these five items are required for the whole country.

Side parking, half-slope start, right-angle turn, S curve, reverse into storage.

Inverted, sideways, half-slopes, right angles, S-bends.

As of April 2021, subject 2 exams.

The project includes: reversing into storage.

Side parking, ramp stop and start, right-angle turn, curve driving.

1. Reversing and warehousing: Examine the driver's ability to operate the car in the field, and reversing into the warehouse is a driver's test.

One of the assessment points, i.e., maneuvering the vehicle into the garage correctly from both sides during the movement.

2. Side parking: Side parking.

It is an increasingly common situation in cities, especially when there is a shortage of parking spaces in regular parking lots, and many places have divided the original streets into parking spaces on both sides, becoming "side parking spaces".

3. Ramp fixed-point parking and starting: Ramp fixed-point parking and starting is an assessment point of subject 2 in the driver's test. Exam Requirements:

It is required to stop at a fixed position on a ramp with a slope of 10% and a slope length of 30 meters, and the coordination of direction, braking, and clutch is investigated. The purpose is to train motor vehicle drivers to accurately judge the position of the vehicle, and to use the brakes, gears and clutches correctly to meet the needs of stopping and starting on uphill roads.

4. Right-angle turn: Right-angle turn is an assessment point of subject 2 in the driver's test, which assesses the ability of motor vehicle drivers to correctly control the steering and accurately judge the difference between the inner and outer wheels of the vehicle when driving the vehicle in a rapidly changing road section.

Hang first gear and release the handbrake.

Gently lift the clutch to maintain semi-linkage.

Go forward at a constant speed, keep the left side of the windshield wiper on the left side of the car (the first rivet) and the yellow line on the right edge of the road 20 cm apart, and then look at the front of the left side of the car door and the middle door lock a little bit in front of the car.

5. Curve driving: Curve driving is an assessment point of subject 2 in the driver's test, commonly known as S bend. The test requires the vehicle to drive on the S-shaped road surface of the specified width, not to squeeze the road edge line, and to use the direction freely.

The assessment is the ability of the motor vehicle driver to control the steering and control the curve of the vehicle. The purpose is to develop the skills of motor vehicle drivers in the use of steering and the operation of wheel tracks.

The content of Module 2

1. Preparation before the exam.

1) My ID card and admission ticket, after the driving school organizes the test room, according to the reserved test session, go to the waiting hall 30 minutes in advance to swipe the ID card to get the sign-in number.

2) Wait in the test hall, please pay attention to the hall broadcast number and pay attention to the information displayed on the hall screen, call your name, and wait for the examiner to call you on the test lane according to the instructions.

2. Get on the bus and prepare.

1) Fasten your seat belt, adjust the seat to the usual position of the car practice, and then adjust the rearview mirror to make it easier for you to see the point.

2) After confirming with the examiner that you can start the test, you can start according to the voice prompts.

3) Under normal circumstances, the coach car is not turned off, at this time, Yanwanling stepped on the clutch, stepped on the brake, released the handbrake, hung up the first gear, and then slowly lifted the clutch until the body shaken, released the brake and slowly drove to the test area. If the coach has turned off, then press the clutch, brake, and neutral ignition before proceeding with the above steps.

3. The examination has officially begun.

Reversing into storage. 1) The car drives to the right reverse garage stop line position, the shoulder coincides with the stop line and stops, and hangs the reverse gear to start the reverse garage. After the car enters the garage, the body must be straightened, do not turn left and right, and stop at the point.

2) Hang a gear out of the warehouse, drive to the left reverse warehouse control line, and stop after the same shoulder coincides with the control line. Hang the reverse gear to start the left reverse, stop after entering the warehouse, and finally go forward and drive out of the warehouse.

3) Do not stop, slip, turn off, or press the line in the whole process.

Side parking.

1) When entering the side parking test area, take the raised part of the wiper point as a reference, so that it drives along the road sideline, and the latter keeps a distance of 30 cm between the body and the storage location side line through the rearview mirror.

2) Stop when the shoulder coincides with the side parking control line, step on the clutch, step on the brake, and hang the reverse gear to start the side car parking.

3) In the process of side parking, it should be poured into the warehouse at one time, and it is not allowed to stop, slip, turn off the ignition or press the line halfway.

The contents of the second subject are: reversing into the garage, side parking, right-angle turning, simulated emergency obstacle avoidance, and visual discrimination.

1. Reversing into storage: Candidates need to reverse the vehicle into the designated parking space to test their reversing skills and spatial judgment ability.

2. Side Parking: Candidates need to park their vehicles on the side of the designated area to test their ability to master vehicle control and parking skills.

3. Right-angle turn: Candidates need to pass through the designated position in a right-angle turn on the road to test their proficiency in the operation and steering control of the vehicle.

4. Simulate emergency obstacle avoidance: Candidates need to take avoidance actions in time when encountering an emergency on the road at a predetermined speed, and test their response ability and avoidance skills to emergencies.

5. Visual discrimination: Candidates need to distinguish various traffic signs, traffic signals and road conditions on the road, and test their visual discrimination ability and mastery of traffic rules.

The importance and skills of the Subject 2 exam

The Module 2 test is an important part of assessing driving skills and safety awareness. Through this test, the examiner can understand the candidate's ability to control the vehicle, spatial judgment, ability to react quickly and avoid obstacles, as well as understanding and application of traffic rules in actual driving situations. Passing the Subject 2 exam means that the candidate has a certain degree of driving skills and safety awareness.

The Subject 2 exam requires candidates to complete various tasks within a limited time, and they need to be proficient in the operation methods and skills of the vehicle. In the process of preparing for the exam, candidates need to do more simulation exercises to improve their proficiency and reaction speed in vehicle operation. At the same time, you need to understand and obey the traffic rules, pay attention to the road conditions and the behavior of other road users, and ensure your own driving safety.

Conduct more simulation exercises and familiarize yourself with various operations and road test routes. Pay attention to the smooth start and stop of the vehicle, and avoid sudden braking and sharp turns. Maintain good observation habits and pay attention to judging road conditions and other traffic signs and signals.

Learn to properly use the various instruments and equipment in the car, such as the steering wheel, brakes, gear lever, etc.

The content of subject 2 includes curve driving, ramp fixed-point parking and starting, right-angle turning, reversing and parking, and one is side parking, a total of 5 items.

1. Reversing into the garage, which is a more difficult test item in subject 2, the car needs to enter the garage smoothly, and the body needs to be straightened, and it cannot turn left or right. The whole process can not be stopped in the middle of the process, nor can the ignition be turned off.

2. Side parking, which seems to be a relatively simple project, but it is also prone to errors, and it is necessary to adjust the distance between the body and the edge of the library, not too close, nor too far.

3. Curve driving, the project is simply put, that is, the ruler shirt needs to drive on the curved line, pay attention to control the speed, and each curve needs to be on point.

4. Right-angle turning, before entering the right-angle corner, you must place the body well, and pay attention to adjusting the distance between the body and the sideline, so that you can pass smoothly.

5. The ramp stops and starts, and the car chain cavity needs to be called and parked on the ramp, and it also needs to start forward. Pay attention to the speed when going uphill, not too fast, the whole project except for fixed-point parking, other locations can not park or slip.

Subject 2: As soon as you get on the car, you have to practice stepping on the clutch, and controlling the clutch well is also something that the coach often talks about. If the clutch is not stepped on well, the speed is too fast and the point will be missed, and if it is too slow, it will stop and hang out.

The key point of the second subject is to find the position of the semi-linkage point, and follow the principle of "one fast, two slow and three linkage", that is: at the beginning, lift quickly, and when you feel that you are about to reach the semi-linkage position, lift slowly and loosely, so as to find the critical point of the semi-linkage.

Each student has 2 chances per exam. I didn't do it twice, and I couldn't make an appointment for the exam until 10 days later. 2. Deduction criteria:

Failure to wear a seat belt: 100 points will be deducted; When the engine is not in neutral when starting: 100 points will be deducted; Failure to use turn signals (including starting, changing lanes, overtaking, turning, pulling over); The turn signal is turned on for less than three seconds; Forgot to turn off the turn signal or used the turn signal incorrectly:

10 points deducted; Turn off the flame once: 10 points will be deducted.