Wireless Router with Telecom Cat Problem 5

You entered the Telecom Cat because you are currently connected to the Telecom Cat.

Do you not want to use the wireless of the telecom cat now, the wireless of the TP?

Don't connect to the telecom cat first, use the wire to enter the background of the router, that is, use it, point the network settings Lancôme settings, change the Lancôme IP to 192,, click OK, restart the route, connect the telecom modem, and use the route when you enter the cat.

The setting of the router is to fill in the bowl setting in the network settings into the things that Telecom gave you, and then set a wireless security password.

Simple,You're like this,Don't connect the cat first,Just connect the computer directly to the wireless router,1234 port just that port is connected first,Input,adminEnter the settings,LAN settings in the network parameters,Put the IP address road wireless cat is not the same,For example,Pay attention to the new route to enter,Then set the wireless router wifi password,Then DHCP server DHCP is not enabled on the line,Then plug it directly into the cat, This setting is to set the wireless router to a wireless switch, the gateway is changed to save the conflict with the IP network management address of the cat, DHCP is not enabled, there is no routing function, and the IP address cannot be automatically assigned, because the wireless cat already has a routing function, this wireless router does not use DHCP, note: do not use the router WAN interface, 1234 port plug in casually.

See below. Telecom modem connection router].

Steps. First, the connection method.

Routing modem --- router WAN port; The LAN port of the router --- a computer.

Steps. Second, the setting method.

Before setting, please disconnect the WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP range of the router.

In order to avoid conflicts, you can change the IP of the router to other IP segments in order to avoid conflicts (routing the LAN port of the cat). For example, it is modified to:

2. Set up the router Internet access method.

View the IP details of the computers connected to the routing modem. (win+r--input, cmd--input:ipconfig.)

All remember: IP, Mask, Gateway, DNS])

Set it on the router, and select [Static IP] in the [Setup Wizard]. Enter the same as the IP address of the routing modem, the others: mask, gateway, and DNS settings.

Restart the router after the setup is complete.

Settings:1First, connect the computer to the LAN port of the 340G router, and change the IP address from the router to a different network segment address, as long as it is not in the same network segment as the main router. , as long as you change the 340g router address to it;

2.Then turn off the DHCP function of the 340G router in the settings;

3.Finally, connect the network cable from the main router to the LAN port of the 340G router (any one is fine), note that it cannot be a WAN port.

This method can be connected to 6 computers at the same time!

Use your 340G+ as a switch. Directly connect the cable from the Huawei router to the LAN port of 340. WAN does not answer.

Put your 340 in the settings and turn off the DHCP service. This way all your devices are in the same network segment, so it's fine. Wireless or shine on.

Your wireless router should be connected to the wrong wire.,The first line routed to the wireless router should be connected to the LAN port.,Connected to the WAN port, you can't use wireless.。。

1.Plug the broadband modem or home network cable into the WLAN port of the router, and then connect to the computer through the network cable or wireless network.

3.After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

4.Click the Setup Wizard, follow the prompts on the page to set up broadband without oppoe dialing, and enter the broadband account password.

5.According to the prompts on the page, check the box to turn on the WiFi network, and set the password, when finished, click Next, and the device will automatically restart.

Hello: You first connect the device as shown below.

Enter the address you see on the router in your browser, which is usually.

Then enter,Enter the corresponding account and password,Generally, the newly bought admin is indeed the operation interface,You will see a setup wizard on the left,Enter the setup wizard interface。

Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

Go to the wireless settings and select whether the router is enabled for wireless status, which is enabled by default. The SSID is the login name used for authentication by the wireless LAN, and only the authenticated user can access the wireless network.

First, connect the cable of the optical modem, wireless router, and computer. The connection method is as follows: any LAN port of the optical modem is connected to the WAN port of the wireless router, and any LAN port of the wireless router is connected to the network port of the computer.

After connecting, enter Tengda router in the browser; There are also routers that go to the settings page.

Enter the login password in the figure above, the original password is admin, and the login password can be changed after entering the settings page. Enter your password.

Advanced Settings" (if you use ADSL to dial, fill in the account number and password directly).

After clicking "Advanced Settings", the following interface appears, click the WAN port settings shown in the following figure in this interface.

After clicking, the following interface appears, as shown in the figure below, you need to fill in 1 place to set as pppoe; 2. Fill in the account and password given by the operator in the 3rd place. Click OK when you're done.

Once you're OK, click System Status in the top left corner. If you see the following example, the connection is successful.

Next, you need to change the login password of the wireless network, click 1 and then 2, and the following screen will appear. Enter the password you set in 3 places.

Finally exit the router.

Use a network cable to connect the LAN port of the telecom modem to the WAN port of the router.

The cat is connected to the WAN port, and some routers cannot dial up. LAN interface, the router is equivalent to the role of a switch, of course, you can access the Internet. If both stations are connected to the Internet, they can only connect to the WAN port.

According to the router instructions, go to the settings interface to turn on the DHCP service and dial the number with the router. As long as you don't turn off the router, connect 24 hours a day.

I think the cat you're talking about should be a wireless cat.

1. Set the wireless modem to the routing mode first, and turn off the wireless function (otherwise it will conflict with the wireless router), so that the main routing setting is established (the telecom cat needs to ask the local business hall or check the Internet by yourself to set the routing function).

2. Set the wireless router to automatically obtain the IP Internet access mode (the default appearance), modify the wireless configuration and wireless connection security configuration, modify the router IP segment, can not conflict with the cat, and finally turn off the DHCP automatic IP assignment function of the wireless router, which is also to prevent the cat conflict (the above steps are carried out in order, otherwise it will be very troublesome, it is best to restore the router to factory settings and then set it in order), after the above steps are completed, the wireless router is set up as a switch with wireless function.

3. Connect a wire from the non-IPTV interface behind the set cat to any LAN port of the wireless router (must not be a WAN port), if you want to split the wired device from the wireless router, you only need to connect several other LAN ports.

4. Wait for a period of time and use the computer to test whether the network is connected.

First the main line into the cat, and then the cat is linked to the wireless router, (set up the wireless function on the computer, the wireless router behind or the manual has a setting method) and then connect to the computer from the wireless router, and create a local link in the main computer.