How to connect the wireless router behind the telecom modem?

After the router is connected to the broadband modem, you need to go to the router background to set the parameters before you can use it.

Open the browser and enter the admin address, and then enter the default login password admin to log in to the background.

<> select Setup Wizard and click Next to enter your broadband account and password as prompted.

Then click Next to set the connection password and SSID of the wireless wifi.

Once the settings are complete, save and reboot and you're good to go.

1. First of all, you need to get the normal "Internet access" and "Internet password": the easiest way is to use "broadband dialing" to verify the Internet access and password without connecting to the wireless router, usually you can manually enter the Internet access and password, and click the "Connect" button to see if you can access the Internet normally.

2. If you can't dial normally at this time, it means that it is caused by the error of "Internet access" and "Internet password". The corresponding solution is: call the customer service of the telecom network operator**, provide the ID number and the name of the network account opening, and then you can find the broadband Internet access and password.

3. Next, physically connect the wireless router to the telecom modem. Usually, the LAN port of the telecom cat is connected to the WAN port of the router, and the other LAN ports of the router can be connected to the computer network card. 4. Set the IP that is usually used for dial-up computers to the "dynamic acquisition" mode.

And log in to the router background management interface on this computer. The method of logging into the router management interface can be obtained from the back of the router. 5. Switch to the "Network Parameters" - "WAN Port Settings" tab, and set it according to the network access mode.

This parameter is set for dial-up access. 6. After clicking the "Save" button, you can try to use the router to dial-up the connection. Directly click the "Connect" button to use the router to achieve automatic dial-up connection operation.

7. When the dial-up fails through the above methods, it may be caused by the MAC address restriction in the dial-up access mode by the network operator. Switch to the "Network Parameters" - "MAC Address Clone" tab and click on the "Clone MAC Address" button. 8. At this time, the "Router MAC" address will be changed to the MAC address of the current management computer, click "Save" to complete the setting.

Select the connection in the router as ppope. Your network should be dial-up, right? Put your account password on it. The router is set up

**Line. Cat.

Cable. Route the WAN port. Wifi on wifi. If you have wired Internet access, plug the network cable into the LAN port of the router (W is blue.

l is yellow. This is the case with most routers). Got it?

How to connect the telecom modem and the router is as follows:

Make the model: Lenovo Tianyi 510S.

System version: Windows 10.

Software version: Browser.

1. Insert the optical fiber into the optical fiber jack on the back of the cat, of course, some of the pins are very easy to distinguish on the side, because the shape of the optical fiber is very different from the first line network cable.

2. Use a network cable to connect the gigabit port of the cat Take the blue network cable as an example, and the interface can be selected according to its own megabyte size. Then plug it in and power it up.

3. The WAN interface of the router plugged into the other end of the blue network cable must not be plugged into the wrong port, and plugged in the power supply to power on.

Telecom optical modem routing all-in-one machine

To a certain extent, except for telecom operators who use optical modem routing all-in-one machines, almost all operators will give priority to using optical modem routing all-in-one machines. When a user applies for broadband**, as long as the user's own broadband** meets the relevant qualifications, the operator will give priority to installing the optical modem routing all-in-one machine for the user. The optical modem routing all-in-one machine is very convenient to use, and it can also save a certain amount of operating costs.

If we need to install both the cat and the router, it will not only be very troublesome for users to use, but some people will also misoperate. If we use an optical modem routing all-in-one machine, the optical modem routing all-in-one machine is very lightweight, and we can also ask the staff to help us set the router in advance, so the advantages of the optical modem routing all-in-one machine are very obvious.

The specific steps are as follows:

1. Insert the embedded slide cable into the LAN port of the telecom modem and the LAN port of the router;

2. Enter the login address of the router in the browser to enter the login page of the router background management;

3. Click "Route Settings";

4. Click and select "DHCP Server" on the left.

5. Select "Off", here you must turn off the DHCP function of the router, because the DHCP function has been turned on by the modem, and multiple DHCP functions will cause conflicts and bends, resulting in network instability;

6. Select "Wireless Settings" on the left and click to enter;

7. Turn on the wireless function and set the name and password of the wireless orange limb;

8. The last time you save, you can set the router to complete.