How do telecom fiber optic cables connect to wireless routers?

It is recommended that you check whether your home line is directly connected to the computer to dial up the Internet. If yes, then you don't need to use a cat. All you need is a wireless router.

Set up a wireless router to set up your wireless Internet environment. The steps to set up the wireless router are as follows.

Connect the network device correctly, connect the network cable (or direct home cable) of the cat to the WAN interface of the router, connect any interface of the LAN port of the router to the computer, open Internet Explorer on the computer, enter the correct IP address of the router (user name and password, the default user name and password are admin), you can also refer to the router instruction manual, enter the configuration interface of the router, and set the router correctly according to the setup wizard. Then, restart all devices and connect the LAN ports of the router to other computers separately to achieve normal Internet access for multiple people. At the same time, it also realizes the construction of wireless networks.

We hope you find the above information helpful. Have a great day.

If you need to check the phone bill, please log in to the online business hall (, the current network hall is carrying out recharge and payment to grab iPad mini, large-screen mobile phone activities, and 50 yuan, 20 yuan, 10 yuan phone bills are massive**, the winning rate is 100%; For more information, please refer to:

or the official website of China Telecom (

According to your situation, it is recommended that you replace the fiber optic cable head with a telecom network cable head.

You can call 10,000 for broadband protection, and a professional will come to solve it.

Telecom fiber-to-the-home needs to be connected to the optical modem to be used online, and wireless routers need to be connected to the optical modem. According to the different optical modems used, there are two situations:

1. The home optical fiber is connected to a simple optical modem device, and the cat is directly connected to the computer with a network cable, and the computer needs to be dialed up to connect

Set the router WAN port parameters to PPPoE dial-up mode, and enter the broadband account and password, and set other settings according to the router manual or according to the router setup wizard. After the settings are complete, use a network cable to connect the modem to the WAN port of the router.

2. The optical fiber connection device is a GPON device that integrates the cat and the router, and the computer directly connects the cat without dial-up connection of the computer, and the computer can be connected to the Internet by automatically obtaining the IP

Set the WAN port parameter of the router to dynamic IP, and pay attention to modify the IP address of the LAN port, so as not to be in the same IP segment as the IP address of the modem to avoid IP conflicts. For example, if the IP address of the cat is changed to the first three digits of the LAN port of the router, at least one of them cannot be the same as the first three digits).

Other settings can be set according to the router manual or according to the router setup wizard. After the settings are complete, use a network cable to connect the modem to the WAN port of the router.

Set the DHCP function to disable the LAN port of B, turn on the LAN port setting of network parameters, and change the IP address of the LAN port so that the router and the modem are in the same network segment. For example, the LAN port IP of the cat is, change the router to , as long as it does not conflict with other IP addresses that have been used. The WAN port parameters do not need to be set, and the wireless settings of the router are set according to the manual.

After the setting is completed, the LAN port of the cat is connected to the LAN port of the router, and the router is equivalent to the expansion port of the optical modem, which plays the role of a switch, and the computer can be connected to the LAN port of the router and can be used. After the settings are complete, connect the modem to the LAN port of the router with a network cable.

Hello: You first connect the device as shown below.

Then in the case of not connecting the optical modem, set the LAN port setting of the wireless router, set the IP address to it, and then connect the optical modem, and then you can enter the wireless router, and then you can set other items on the router, enter the setup wizard interface, select PPPOE dial-up Internet access to fill in the Internet account and password, this should be understood by everyone, there will be an account number when opening broadband, you can fill it in.

Prepare the telecom fiber optic modem, wireless router, and computer can be connected.

The procedure is as follows:

Connect the fiber-optic modem and the router with a network cable, take a network cable and insert it into any of the four holes of the router, and plug the other end into the computer to connect the computer to the router.

Open the browser, enter and enter in the ** bar, enter the username and password, generally the initial password and username are admin, and then click OK;

Click Internet settings, select ADSL dialing, set the signal name and password, and click OK;

Finally, you can set a static IP address.

PON is an all-in-one machine, no need to buy wireless routing.

1. First of all, connect the computer with a wire, cancel the default connection of "broadband connection", and hit IE input: Fill in the following information in the Tianyi device: User:

Telecomadmin Password: NE7ja%5M or Factory Mode Username: fiberhomehg2x0 Password:

hg2x0 ；

2. After logging in to the device, click -"Networking"-"Select"The name of the connection"drop-down list for the first selection"2_internet_b_vid_41", place the following"Connection type"Changed to"route", (Route Pattern).Select"pppoe"."Username","Password"Fill in the telecom broadband account + password port can not be selected, but be sure to check 1, 3, 4, and wireless SSID1

Nothing else moves. Click Save to exit safely;

Please try it out: mobile phones, laptops, tablets, log in to wifi and go directly to the Internet!

If the problem is solved, please adopt it in time, thank you!

1. The contact between optical fiber broadband and the router is connected to the interface as standard. No matter what brand it is or how high the rate is, it is necessary to connect the fiber line to the router inlet port. The fiber optic lines are all standard crystal heads, which can be directly connected to the input of the router (blue socket).

2. After the optical fiber is connected to the router, the router needs to be set up so that the computer can see the wireless network icon information.

4. During the setup process, you must enter the accurate account, username and password. Any inaccuracies can be reset.

5. The default password for the password of the user account is admin, and the username and password are given by the dealer. No, it cannot be changed.

6. After the setting is completed, the number with the strongest signal will appear on the computer or mobile phone, which is the signal icon of the router. You can now log in to broadband Internet access.

Same as ADSL Ethernet Routers, WAN Routes, LAN Routers, and Computer Connections.

You can configure PPPOE account dialing for inbound routes.

Of course, it can't be connected, ordinary road oil only has a network interface, not a fiber optic interface, if there is a route with a fiber optic interface, it can be used, like the current telecom has this kind of routing.

And plug that cable from the telecom fiber optic cat to your desktop computer directly into a regular wireless router.

If you can't connect it, change the router and buy a suitable one, otherwise there is really no way.

Hello, no matter what kind of broadband access method, whether it is ADSL** line or optical migration, it will be the last step.

Convert into a network cable interface (8-core network cable interface), so as to plug in to the network card interface of the broadband user's computer so that you can dial up the Internet, when using the router, plug the original network cable plugged into the computer into the WAN port of the router.

If you don't plug it in, I suspect you may have bought the wrong device.

Do you have a ** wire interface that you bought?

Hope it helps.

Here's how to set up your router:

2. Then open the browser of the computer, enter the login address and login password of the router, and the specific login IP and password can be looked at the label on the back of the router.

3. After entering the router, there will be a setup wizard, first fill in your broadband account and password.

4. Then set the wireless name and connection password.

5. After the successful setting, a prompt will appear for the successful setting, and it will take effect by restarting the router.

Connect from the network port 1 of the cat to the WAN port of the router, and then connect to the computer from the LAN port of the router.

Broadband connection wireless router must be network cable, after turning on wireless, you can connect wirelessly, the account password is set when you connect!

1. Connect the computer, router, and cat (modern) with a network cable in turn, note that the connection between the cat and the router must be the WLAN interface of the router.

3. Enter the setup wizard and set it up in turn, you can set your wifi name and password.

Broadband cat connected to the wireless router, so set up, install:

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day.

Any LAN port of the telecom optical modem pulls a network cable to the wireless router of its network WAN port.

Connect directly to the computer from the optical modem to try, if you can (pay attention to the setting of the IP address), that is the problem of routing settings, in the routing debugging, if it does not work direct telecommunications**, it is not the problem of the optical modem or the problem of the telecommunication line.

You'll need to connect the cable that came out of the cat to the WAN port of your wireless router and try it again.

The installation and operation method of the optical fiber cat wireless router is as follows:

1. Connect the network cable from the LAN port of the optical modem to the WAN port of the wireless router, and connect the network cable from the wireless router to the computer (if it is a notebook for debugging, it can be directly debugged by connecting the wireless router through the wireless signal), and automatically obtain the IP address and DNS settings of the local connection of the computer;

2. Log in to the wireless router and change the LAN port address to avoid conflicts with the LAN address CIDR block of the optical modem.

4. After entering the wireless router, click on the left column to set up the wizard, next, select ADSL virtual dial-up (PPPoe) Internet access mode, next, enter the broadband account and password, next;

5. Set the wireless network name in the SSID box, enter the wireless network password with at least 8 digits in the psk box, and the next step;

6. Save, restart the wireless router according to the prompts to complete the installation of the wireless router.

Buy a fiber optic receiver (which converts the optical signal first) and connect it to the router.

The setting of the router has nothing to do with the network provider, check the manual of the router (there is also a reverse side of the router) for the setting method, the connection method: broadband cable connection modem, cat LAN port) and router (WAN port) connection, power connection and turn on.

Open IE (or other browsers), type Enter in the address bar, press Enter, and enter your username and password in the pop-up dialog box OK.

Now entered; Routing setting interface Enter your broadband account and password (it will automatically pop up when you set it up for the first time, if there is no pop-up, you can click the menu on the left to create), refresh it (it should be able to surf the Internet), and click OK.

To the fiber box, then connect the router.

specific installation methods;

2. Connect the network cable from any LAN port of the optical modem to the WAN port of the wireless router, and then connect the network cable from the LAN of the wireless router to the computer, and the local connection IP address and DNS settings of the computer are automatically obtained;

3. Open the browser, enter, press Enter, enter the wireless router management user and password (the login address, management username and password will be indicated behind the wireless router), OK, and enter the wireless router setting interface;

4. Set up the wizard, next, select PPPoe dial-up Internet mode, next step; Enter the Internet account and password, next, set the wireless network name in the SSID box, set a wireless password of at least 8 digits in the psk box, and the next step;

5. Save and restart the wireless router to complete the installation of the wireless router.

I don't know if that's the case, but that's my situation. Both connection IPs are.

I changed the router wan port to.

If the IP does not conflict, it should be solved.

First of all, make sure that you are 2 routing connections, tentatively called the main route and wireless routing to explain, the network cable of the telecom is inserted into the main route, the network cable is connected to the computer, at this time it is to enter the main route to see the IP settings, if the IP gateway of the main route is, your computer IP should be set to the successful setting, the wireless router is powered on but not connected to the main router but to the computer, the IP address of the wireless router at this time should also be, after entering the wireless route, the IP is modified to, the gateway is, and the wireless function is turned on, Set the wireless wifi password, after restarting, the wireless routing address should be, at this time, connect the wireless router to the main router network cable, and then you want to go to each routing setting, you should enter separately. Or.. At this time, your wireless router will treat the primary router as a gateway, and the main router will be connected to the telecom network, remember that the main router must be set up with DNS, and the DNS of the wireless router can be either the DNS of the same address as the main router.

Your wireless network will be able to log in to the Internet.