Is it OK to paste tempered film on Apple 5S? What are the benefits?

Yes! It's scratch-resistant! Protective glass!

But it's not good! It's thicker than the usual film! It doesn't feel good when you press the home button!

If you're 5, forget it! Paste a home button sticker! But 5s can't be pasted.

When you drop your phone, you don't break it, you just break the membrane.

First of all, it is divided into two kinds, one is with an edge, there is an arc, this is just the same as the machine, it is more good-looking, in one is no edge, that is, it is very square, this comparison looks asymmetrical machine, well, let's talk about this film, the first thick, the second smooth, the third, clear, the fourth wear-resistant, the fifth, fall-resistant, ang, in fact, the price is a penny, the use is more cool! I also said the benefits, the function is also written above, the only point, thick, this is absolute, but it does not affect the clarity! 85 stickers!

The tempered film is very expensive and bites.

Hello! Prevent the screen from breaking too easily.

Summary. Whether the Apple mobile phone sticks a tempered film or not is to be chosen according to the user's habits and experience.

Whether the Apple mobile phone sticks a tempered film or not is to be chosen according to the user's habits and experience.

Can you add, I don't quite understand it.

To stick it or not to stick it? What are the advantages and disadvantages of the film? First of all, there is no doubt that the tempered film can protect the screen from scratches.

Although Corning Gorilla glass is now commonly used, it is already hard enough to avoid being scratched by the key. However, the most harmful thing to the screen is the fine sand, and the sand that inadvertently runs into your pocket may engrave an indelible mark on your phone. With the tempered film, you can change the scratched tempered film, the price is cheap, and it is not distressing to change.

Secondly, the tempered film can also protect the screen from breaking when it is dropped. In daily life, mobile phones will inevitably be dropped and bumped, and the tempered film can absorb the impact of the drop and protect the screen from damage as much as possible. Although it has not been tested, it makes sense.

On the other hand, the tempered film affects the display effect of the screen. No matter how good the tempered film is, the light transmittance cannot reach 100%, as long as the film is attached, it will affect the effect of the screen. Moreover, some inferior tempered films will distort the picture, affect the perception and even damage the eyesight.

Moreover, the tempered film also affects the feel of the mobile phone screen. The general tempered film must have a big gap with the bare metal screen in terms of feel, which is also the main reason why some people don't like the film. Whether to stick the film or not depends on your mood to decide, Du Yuanpi and said that the two coolest moments with the mobile phone are the moment when the original film is unpacked and the moment when the mobile phone film is torn off.

However, here are some suggestions for the film party, first of all, the screen should still be pasted with glass tempered film, whether it is quality, feel or difficulty of filming, tempered film is much better than plastic film; Secondly, since you are applying a film to the love machine, don't be greedy.

Summary. Pro, it is necessary to paste the film, and to *** some film, because during the use of the Apple mobile phone, sometimes it is inevitable to avoid bumps and scratches, and the film can sometimes really save the mobile phone screen. The newly bought Apple mobile phone not only needs to be filmed, but also wears a phone case, and if you want to change the phone after using it for a period of time, the appearance of this mobile phone will affect the scratches.

Right away. Pro, it is necessary to paste the film, and it is necessary to have some films, because during the use of the Apple mobile phone, sometimes it is inevitable to avoid bumps and scratches in the absence of swimming, and the film can sometimes really save the screen of the mobile phone. The newly bought Apple mobile phone is not only sleepy and weary, it is best to wear a mobile phone case, and after using it for a period of time, you want to change the mobile phone.

So, if you are not very obsessed with the pursuit of the original operator's blindness and feeling, then it is better to put a film on the phone, which can prevent the screen from scratching; Second, it can prevent the screen from breaking and reduce maintenance costs; Third, it can also ensure the newness of the mobile phone, and if you want to use the hand grinding machine in the future**,**Li will be a little higher.

Hope it solves the problem for you.

Benefits of sticking tempered film on iPhone5S mobile phones:

1. If the mobile phone accidentally falls to the ground, it can effectively protect the touch screen of the mobile phone from scratching or shattering. Because the tempered film can effectively disperse the local installation force, it can protect the touch screen from damage.

2. The newly launched tempered glass eye film, on the basis of protecting the mobile phone screen, prevents the damage of blue light radiation to the eyes of the mobile phone, prevents myopia, and realizes the dual protection of man and machine.

3. Wear-resistant, waterproof and anti-corrosion. Some substances that are accidentally stuck on can affect the touch screen, and the tempered film can keep water and oil and the like out.

4. More beautiful than plastic film, generous, high hardness, wear-resistant, easy to fit, as long as the touch screen is wiped clean, it will automatically exhaust.

Disadvantages of iphone5s tempered film:

1. The phone becomes thicker, and the poor quality will also affect the touch, resulting in touch drift.

2. The light transmittance and clarity of the mobile phone are affected. The light transmittance of the glass will lose some of the light, which will also affect the clarity of the phone.

3. Brittle, high cost, thick, edge processing defects. Since the tempered film has a certain thickness, even the thinnest millimeter of film can destroy the integrity of the grip at the edges. In addition, the resin adhesive layer exposed at the edges is also prone to dirt and dirt, and for curved screens, the tempered film is almost impossible to match.

Yes 1: The feel of the tempered film is the same as the feel of the original screen of the mobile phone.

2: The tempered film is generally explosion-proof, so the screen of the mobile phone will generally not be broken when it falls to the ground.

3: Light transmittance is better than ordinary film and scratch resistant.

Hello, no, no matter how good the tempered film light transmittance is not 100%, paste two layers, the light transmittance will be worse, and long-term use will hurt the eyes.

There is no need to paste the mobile phone, and the tempered film will basically not be broken after wrapping. Don't be so insured. Applying two layers of film will affect the sensitivity of the mobile phone screen.

No, according to my many years in this industry, sticking two layers of film, first, affects the feel, second, long-term use has an impact on the flexibility of the touch screen, and even scrapped.

No, mobile phones are usually single-filmed, and two films can not be pasted, which will make the mobile phone screen insensitive, thank you.

Why do you still have a film?,Paste two,The screen clarity and light transmission are reduced,Touch sensitivity is reduced。

Yes, yes, but it will affect the touch screen effect.

It's too thick. Affects touchscreen sensitivity. Besides, there's no need.

No, it will affect the sensitivity.

There's no need, one is fine, two too thick will affect the appearance.

Yes, what's wrong with money, the touch is low, it should be so low that it bursts the table, and you can do it yourself.

It's not good, because it will protrude a large piece, and one piece is enough, so why need two.

If you stick your mobile phone, it will become a copycat machine, which may be more difficult to use than a copycat machine.

I want to ask you, can I still use that touch screen?

Is it necessary for 5s to be so protective?

This is indeed thinner than the general tempered glass film, but it is still a little thicker than the most common ordinary film (PET), and when you touch the outer ring of the 5S round home button, you will obviously feel the thickness difference between the film and the screen, fortunately, after getting used to it, your fingers can basically forget the thickness brought by the film.

The light transmittance of the tempered glass film is better than that of the general ordinary film, and it is definitely not as cool as running naked, and you can still find a little glare phenomenon if you look closely, but it does not affect the use.

I haven't done extreme testing, only a few days of use, and I haven't found any scratches, after all, the hardness has reached the highest level of 9h (official data), but it is difficult to avoid scratches if you use it for a long time, and the main reason for scratches is not hard objects such as nails, keys, and nibs, but sand and gravel particles that are not easy to detect in our daily life.

Although the tempered glass film has an anti-burst function, it is mainly aimed at the film itself, and if the mobile phone falls to the ground, there is also the possibility of breaking the screen.

It is known as anti-fingerprint, but unfortunately it still can't be prevented, and it can only be said that the anti-fingerprint effect is better than that of the general film.

Compared with ordinary films, the screen fit is tighter, and the touch feel is smoother.

Tempered film lamination method steps.

1. If there is a protective film originally pasted, paste it with the label of Jingchi and open the original film;

2. Clean the surface of the screen, if there are many stains, you can wipe it with an alcohol bag first; Then clean the screen with a blue electrostatic precipitator film;

3. Tear off the protective film on the tempered film, aim the glass film at the vacancy and edge, and slowly put it down;

4. Gently press the center of the film with your fingers to make it automatically adsorb on the screen;

5. If there are some small bubbles, wipe them vigorously with a dust-free cloth to remove them.

Note: Ensure that the screen is clean and free of dust before operating. It is best to observe in bright light and confirm before proceeding.

The film is aligned, and it is good to put it down slowly. If there are bubbles, just push the bubbles outside.