Is it better to replace the router in the living room and bedroom?

There are many factors that affect the speed of the network, such as the old router, the network cable used in the network port on the wall, etc., if you want the router in the bedroom to be faster, then I suggest you use six types of network cable connection, first of all, the optical cat directly out of a network cable connected to the network port, and then out of a connection to the living room route, the network cable is also a good network cable, and then there is the upgrade of broadband, now many broadband optical modems have their own wireless network, you change a good optical modem, the living room route is saved, in the upgrade to 500m or gigabit, The internet speed is even faster.

Test the network speed on the computer to see if the bandwidth reaches about 100, which is okay, there will definitely be some changes in the route, if the living room does not need to use wifi, you can also use a gigabit switch.

The brand of the router determines the quality, and the stable operation means that the network is normal.

There is no need for this, the instability of the route is mainly caused by the number of connected units, for example, a poor route can connect up to 5 units, and a good route can connect more than 10 units, but the number of units connected at home is small, and the poor route will not be reflected.

If it's just 100 megabits, it shouldn't have any impact, and if you upgrade broadband in the future, you have to replace the old one, but I still recommend that you change it all at once, upgrading broadband is a matter of time or time, buy early and enjoy it early.

Just describe, no. And then in terms of household functions. A certain water is good, not bad at all. As for those plugins for your room. For families, most of them are just gimmicks.

I don't know how to continue asking, satisfied.

This depends on what you like, you have extra money, and you have to change a router with a good signal. But if you don't play in the living room often. Actually, it's not too necessary.

If you only have 100M broadband at home, the most rubbish Mercury router is enough for your home.

I bought a wifi6 router and was able to solve all the problems.

Try not to put the wireless router in the bedroom for a long time.

Because the wireless signal sent by the wireless router also belongs to a kind of electromagnetic wave, as long as it is an electromagnetic wave, there will be a radiation effect, but there are big and small, if the router can not be placed in the bedroom is also a good signal, then it is best to put it in another room, even if it must be placed in the bedroom, it should be away from the head of the bed, after all, the sleep time at night is longer, the head of the bed is closer to the human brain, there will be radiation accumulation, and the human body will be affected by the electromagnetic waves at close range for a long time.

In short, although the radiation of wireless routers is small, it is a high-security electronic product, but human beings are exposed to more and more such electronic products, and it is of course necessary to avoid less point radiation.

1. The principle of centering. A big rule of thumb is to try to be as central as possible when you're close to the main area of use. The wifi signal is mainly transmitted by direct radiation, and it will not detour when encountering obstacles, and it will be blocked if it cannot penetrate.

2. Keep away from metal barriers. Try not to put it in a metal box in the house. Metal is impenetrable.

Therefore, only wired routers can be placed in the weak current box with metal shells, and wireless routers cannot be placed. If it must be placed due to the limited conditions, it is also necessary to purchase products with external antennas, and punch holes in the weak current box to lead the antenna out and expose it.

3. Try to have as few partition walls as possible. Now the load-bearing wall of the house is mostly reinforced concrete, especially for high-rise housing, the steel bars in the wall are staggered into a network to form an electromagnetic shielding net, so the signal will be attenuated by more than half after a load-bearing wall, and it is generally impossible to penetrate the two walls.

4. Don't get too close to yourself. Although the impact of radiation is not large, if you can avoid it, try not to put it at the head of the bed, and it is recommended to stay at least 2 meters away from yourself.

5. Considering the problem of power supply and wiring, then stick it to the wall.

6. Do not put it together with electrical appliances with strong electromagnetic waves (such as induction cookers, microwave ovens).

7. If possible, it is better to put it higher.

Ways to install a second router in your bedroom:

1. Wired mode.

Prerequisite: There needs to be a network cable between the two wireless routers.

Connection: According to the different ports connected by the two wireless routers, it is divided into two ways: the LAN port is connected to the LAN port, which can realize the expansion of home wireless WiFi, and the two wireless routers are the same network segment, which is most suitable for home use.

WAN port is connected to LAN port, this connection method, the devices connected by the two wireless routers belong to different network segments, which is not convenient for file sharing and the operation of smart home devices.

2. Method 1: Connect the LAN port to the LAN port.

Connection: The LAN port of the secondary router is connected to the LAN port of the primary router to expand the network.

Configuration: The DHCP service is disabled on the secondary router, and the IP address of the secondary router is set to a network segment with the primary router to facilitate the management of the secondary router. Features: In this connection and configuration mode, the devices connected to the main and secondary routers belong to the same network segment, which is convenient for file sharing, interconnection of smart home devices, and same-screen display.

3. Method 2: Connect the WAN port to the LAN port.

Connection: The WAN port of the secondary router is connected to the LAN port of the primary router, and the WAN port of the secondary router automatically obtains the IP address from the primary router; Configuration: The primary router, secondary router, and optical modem cannot use the same network segment, as shown in the following figure, otherwise IP address conflicts may occur, the network is unstable, or the network cannot be used.

Features: The devices connected to the main router and the secondary router belong to the pure cherry blossom in different network segments, which cannot realize the networking of smart home devices, and cannot realize wireless screen projection across wireless routers, which is suitable for two families to share optical modems.

4. Wireless mode.

If there is no network cable connection between the two wireless routers, then you can consider using a wireless bridging method, after all, the antenna of the wireless router is much better than that of a mobile phone.

Most wireless routers support the "WiFi relay" function, enter the setting interface of the non-selling router, turn on the function, search for the SSID of the main router, and connect to achieve the wireless bridging function. Independently set the SSID and password of the secondary router, which can be the same as that of the primary router; For details, see the following figure.

5. Power cat mode.

If there is no network cable between the two wireless routers and there are several walls between them, then the wireless relay function is also invalid, and you can consider using the power modem.

Several conditions need to be met: do not cross the meter, try not to open in the middle of the line; The power modem is used in pairs, one is connected to the LAN port and wall plug of the primary router, and the other is connected to the LAN port and wall plug of the secondary router.

If the house area is large and there are many rooms, a router is placed in the living room, and the wireless network signal in the room is not good, then we should consider installing multiple routers mesh networking, which can achieve whole-house wifi signal coverage and seamless roaming.

It all starts with choosing the right router or other device. Not all routers are created equal, and the size and layout of your home will determine what type of wireless network you need.

A flashing WAN on the router indicates that there is a signal source. Then open the wireless network in the phone settings, at this time we can see the initial wireless network automatically created by the router (note: some Android phones need to check "network notification" to see), click to connect to the wireless network.

Users connected to the same wireless network can access each other, and if their security door key is carried in their pockets, the things in the house may be taken away quietly. When the surfer is connected to your wireless network, they are on the same LAN as you can access each other. He can enter the router management interface to tamper with the configuration information of the router, or he can access any computer in the same LAN to steal files or sensitive password information in the computer, causing serious consequences.

The router is easy to use, and the wireless network is also very convenient, but as the saying goes, no one is perfect, and the router naturally has shortcomings. When the router is used for a long time, we will find such a problem, either the mobile phone shows that it is connected to the wireless network, but it cannot be connected to the Internet or used. Either you are connected to the wireless network, but the speed is quite slow, it is like a turtle speed.

Every time we encounter such a situation, we will choose to restart the mobile phone, router, or directly find a master to repair.

The annualized interest rate of the loan is the interest rate that is discounted to the whole year through the inherent rate of return of the product, and is an interest rate for calculating the interest on the loan. Bank loan interest is usually calculated on a monthly compounding basis. There are two ways to repay the loan in installments

One is equal principal and interest, and the other is equal principal. Short-term loans can also be repaid in a lump sum. Interest calculation formula.

So in WeChat, we need to add friends to chat, if WeChat is deleted, why is the other party's WeChat still in their own list, the reason given by WeChat is very heart-wrenching.

Either way, depending on your needs.

Any kind of router can basically meet the basic functions of users, if your requirements are relatively low, you can choose TP-link. If you have high requirements, you can give priority to buying ASUS and NetGear routers.

In real life, few people directly mention the brand of routers, because everyone just thinks of routers as a normal device connected to the network. When we access broadband services, many broadband operators will directly choose to give away routers to users, and some operators will also give away router all-in-one machines. In this case, users do not need to actively buy a router at all, and the cost and premium space of the router are actually very low.

1. The first option is to buy TP-link.

TP-Link is a common brand of routers, and we can also see many router models about TP-Link on the market. If the user's bandwidth is relatively large, the user can give preference to TP-Link router all-in-one. The setup of tp-link is very simple, and many users don't need to set up any router at all, just need to connect and use it.

2. The second figure is to purchase an ASUS router.

ASUS routers are relatively expensive, but because ASUS's router technology itself is relatively mature, ASUS routers will have stronger stability. For those users who have high network requirements, ASUS routers are a good choice. If you want to buy a better router, you can choose to replace your ASUS router with a NetGear router.

3. What is my personal advice?

As I said at the beginning, although there are many brands of routers on the market, the functions of the routers are highly similar, and the differences between routers are not much. If the user itself does not have too high network requirements, almost all router brands can choose to buy it. <>

There are many router styles in it, I personally prefer Lenovo and Xiaomi's routers, I think the router signals of these two brands are relatively stable.

You can choose the Huawei brand, or you can choose Xiaomi, these two brands are particularly cost-effective in life, and there is no problem in using them for 5 to 10 years in life.

1.Tengda AC23 Tengda AC23 is the ceiling of performance in WiFi 5 routers, and it is also the ceiling of cost performance.

Chip architecture, CPU is RTL8197FH with a main frequency of 1GHz, 5GHz supports 4T4R transceiver and receiver, 2X2MIMO 64-QAM + 5G 4X4MIMO 256-QAM, if you don't pursue WiFi 6, this router is the best performance.

You can choose the Huawei brand, this is a particularly excellent domestic brand, the phenomenon is particularly high in life, I have been buying it for three years, and there has never been any failure.

TP-Link router. If you want to use the wireless function, we recommend using a TP Link wireless router with dual antennas.

This kind of router is stable and does not heat up, has a strong signal, and has obvious advantages.

Request m!

Root antenna's! Note: 1. M of the router is the abbreviation of Mbps, and the bit rate is a unit used to describe the speed of data transmission.

2. Theoretically, the network speed of 150Mbps is the transmission speed per second. With a speed of 300Mbps, the transfer speed per second is just that.

3. The flow rate of data is variable, and the bit rate is only an average reference value. The network speed of 1m is theoretically 128kb s, but in fact it is only about 120, because there will be a certain loss of data in the transmission process.

Example. In other words, the router marked 150M means that the router can only support a maximum bandwidth of 150M, even if the network speed is 200M, it will only be 150M and 300M after passing through the router.