How to do home decoration and bathroom anti slip?

Personally, I think that when decorating the bathroom, the dry and wet areas should be separated. Then the floor of the bathroom should be as non-slip as possible.

For home decoration, the bathroom is generally non-slip tiles or non-slip mats. Some people will choose pebbles, but the use of pebbles requires a high level of master.

When decorating the house, the bathroom should be decorated with dry and wet separation. to achieve a non-slip effect.

If the bathroom is non-slip, you can paste anti-slip mats, or paste some textured tiles to reduce the risk of slipping.

When decorating the bathroom, choose the tiles on the ground, and be sure to choose the kind of non-slip, so that it will be safer and not easy to fall down in the future!

How can the bathroom be non-slip?

The floor of the bathroom does not need to be deliberately non-slip. Generally, when the new building is laid, it is paved with non-slip floor. Of course, this is of average quality. If you are not satisfied, you can change a batch of high-quality ones yourself.

Hello, there are many kinds of anti-slip measures in the bathroom, if you have not yet decorated, it is best to use the special anti-slip bricks in the bathroom, threaded, or flowered, which can have a good anti-slip effect.

If you have used inferior tiles, the anti-slip coefficient does not meet the national standard, then do a treatment work for the surface of the tile, now CPC anti-slip agent is the best way to prevent slip measures in the bathroom, as long as the tile is cleaned, and so on, after drying, directly and evenly coated with a layer of CPC anti-slip agent, a few minutes after washing the ground to achieve a permanent anti-slip effect.

Does the bathroom need to be non-slip? How to do a good job of anti-slip?

The decoration of the shower room is generally decorated with tiles to decorate the floor, and the tiles have non-slip tiles, and the effect is also very good. The other is to increase friction with tile grooves. This is a common method of decoration for the floor decoration of the shower area.

At the same time, the bottom is good at organizing drainage, generally medium height, low around, making a sink...In addition, pedals and foot pads can be placed in the shower area to prevent slipping. Placing an anti-corrosive wooden pedal can not only prevent slipping, but also not ice feet.

The seat cushion is hygienic and can be washed and dried when not in use to maintain a high level of cleanliness. There are also non-slip mats laid on the bathroom floor, and if you plan to decorate it like this, the floor tiles in the bathroom are generally fine. There is also the option of laying the floor of the shower area with stones.

Choose this stone, the texture is dense, not smooth, and the stone has the feeling of foot massage. But be careful from an aesthetic point of view. Otherwise there will be a bit of a dirty feeling.

The shower area is non-slip, one is to organize the drainage, the ground is not waterlogged, and the other is that the ground is slippery if there is water. It's like better understanding the glass or wax covered on the tile 3354. It's like the film we put on our phones.

Rather, it said. Whether the glazed tile is non-slip or not has a lot to do with the composition of the glaze. The appearance is similar, but the anti-slip effect of different glazes is also different.

The surface flatness is best understood, except for glazed tiles, the anti-slip ability of all ceramic tiles (all-over bricks, polished tiles, glass tiles, etc.) is the flatness of the surface 3354 The smoother the surface, the worse the anti-slip effect. So we always say that the anti-slip effect of all-over bricks is better. Because the surface of the whole brick is uneven.

On the contrary, polished tiles polished with mirrors have a flat surface, so the slip resistance is relatively reduced.

Tile gaps actually increase the number of gaps and distances in a small area of the flatness of the tile surface, making the tile surface concave and improving the slip resistance. So that little brick, the mosaic brick, is also very fireproof. If you use imitation tiles with uneven surfaces, or use imitation tiles with small specifications, tiles with uneven surfaces are more non-slip than flat tiles, and it is better to use different tiles in the shower area and dry area.

The purpose of using small size tiles is also non-slip. There are many gaps, large friction, and the anti-slip effect is naturally better. In many American-style bathrooms, small colored imitation bricks are used in showers, and this is the principle.

If there are elderly people and children at home, it is best to make the bathroom non-slip; The tiles of the bathroom can choose non-slip tiles; You can also spread a layer of anti-slip agent on the bathroom tiles; Alternatively, you can place a non-slip mat in the bathroom.

It needs to be done non-slip. The easiest way to do this is to buy a non-slip mat online to pad the ground. You can also put absorbent pads and blankets, which can be non-slip, which looks high-grade and practical.

Dear, hello, I'm glad to answer for you, how to anti-slip treatment of the renovated bathroom is 1. Dry and wet separation Simply put, the shower area is separated from other functional areas, which not only ensures privacy, but also effectively reduces the overflow of walls and floors in other areas and keeps the outside area dry. In this way, the water will not soak the entire bathroom space when showering, which reduces the possibility of slipping and falling from the source. 2. Anti-slip floor tiles Anti-slip floor tiles are made by polishing the surface of the floor tiles to form folds or concave and convex points, so as to increase the friction between the brick surface and the sole of the foot to prevent falling.

3. Non-slip mat If the decoration is not well considered and the non-slip floor tiles are not laid, the non-slip floor mat is a good remedy. If you put it outside the shower door, not only will the soles of your feet slip, but you will also avoid wet footprints everywhere in the bathroom. Non-slip tiles can be laid to solve the anti-slip toilet problem.

Laying non-slip tiles is mainly to see the surface of the tile release rough and smooth, whether the paving is smooth, etc., most of the front of the tile is selected with folds, stripes or concave and convex points, in order to increase the friction between the ground tile surface and people's feet or soles, so as to prevent slipping or falling. Generally speaking, the anti-slip effect of mosaic tiles is better, and the anti-slip of full-body tiles is better, so when choosing non-slip floor tiles, the effect of choosing full-body tiles will be better. 1. Do a good job of dry and wet separation.

Separating dry and wet in the bathroom not only keeps the venue outside of bathing dry, but also improves safety. 2. Choose non-slip building materials. Bathroom floor tiles can mainly choose quartz tiles, antique tiles, and emery tiles.

In terms of flooring, you can choose hardwood flooring reinforced with plywood, which has a good moisture and moisture resistance. 3. Pay attention to laying non-slip mats. A non-slip mat can be placed in a key position in the bathroom.

Generally speaking, when buying floor tiles, everyone will choose the block according to the area of the home, and the thickness must be selected, so for inexperienced people do not know, do not know that the non-slip floor tiles are generally thick, so they cannot make a choice, and will delay a lot of time, but until now, many people still do not know what to pay attention to in the non-slip floor tiles of the toilet. Let's take a look. Non-slip floor tiles are generally thicker.

The size of the bathroom tile should be determined according to the size of the bathroom area. In the case that the bathroom area is not very large, the specification of 300*300 should be selected, because the floor of the bathroom needs to find a slope, the floor drain is at a low place, and the water can flow smoothly in the shower or laundry, so it is necessary to use a single floor tile with a small area.

<> 300 * 450 specifications are now the conventional specifications, generally used more, if the bathroom area is relatively large, want to decorate the high-end, you can use 300 * 600 specifications of imitation marble wall tiles. The size of the general bathroom floor tile is determined according to personal preference and bathroom size, there is no fixed size standard, the specifications of the general floor tile are 200 * 300mm, 250 * 330mm, 300 * 450mm, 300 * 600mm, the bathroom is relatively large can use 300 * 450mm or 300 * 600mm; The general bathroom is 300*300mm. In fact, the pattern and size of the general bathroom floor tiles can be decided according to their own preferences, but the most important thing for bathroom floor tiles is to do a good job of anti-slip and waterproof measures, so the quality and installation requirements of floor tiles will be higher.

What should be paid attention to for toilet non-slip floor tiles.

Special attention should be paid to the non-slip toilet floor tiles. While brands will present relevant data to consumers, it's best to try to step on it and sprinkle some water if possible. In addition, the slip resistance of floor tiles is basically formed by the friction of the contact surface, you can buy some floor tiles with decorative patterns and concave and convex feeling, try to do so.

In addition, if you use polished tiles, be sure to ask whether anti-slip agents are added, and you can also feel whether there is a raw anti-slip effect after encountering water. The rebound rate of wall tiles refers to the degree of stickiness on the left and right sides of the wall tile. Normally, the lower the rebound rate means the higher the density of the product, the stronger the anti-pollution ability, the lower the rebound rate will bring about the cracking of the tile surface and the peeling of the overall tile after heating and shrinking.

Hint, the simple way to judge is tapping, the sound is clear, and the density is high; Hoarseness is low density and high water absorption.

According to the size and area of the bathroom, non-slip floor tiles can be used, and non-slip mats or rubber carpets can also be used to prevent non-slip methods, which can not only avoid the situation of water everywhere, but also prevent the soles of the feet from slipping, but it is necessary to pay attention to buying non-toxic and harmless, environmentally friendly and hygienic when buying floor tiles or carpets, and to keep the water flowing smoothly and will not cause various problems such as water accumulation.

The bathroom is probably to lay a floor tile, and then it is best to be frosted, so that it can be non-slip, the problem to pay attention to is that the quality of the frosted floor tiles must be better, and then it must be durable, so that it is the best, it must be waterproof.

You can try to choose those tiles that have non-slip tiles, because that can make the bathroom more non-slip, and then remember to wear non-slip slippers, and the bathroom has water, be sure to clean it in time.

The anticorrosive wood in the store, it is in rows, there are gaps in the middle, which is conducive to drainage, and it is necessary to pay attention to the spacing between the cracked floors of the wooden molds, and it must be done moderately. Now many people can do dry and wet partitions when decorating toilets, it is better to do wet partitions, many people only know how to paste tiles on the toilet on the ground of the shower room, now this practice is outdated, you might as well try this design, drain quickly, do not accumulate water, the key is that it can be non-slip, and it is safer for children and the elderly.

<> anti-slip bricks: Anti-slip floor tiles are a kind of pottery and porcelain in floor tiles, with concave and convex stripes or concave and convex points on the front to increase the friction between the floor tile surface and the human sole, and prevent slipping and falling. If the shower room is paved with pebbles, its aesthetics should be stronger, and the pebbles can also be spliced according to their favorite decoration style, which is more flexible in design, and the pebbles also have a massage effect, which can be non-slip, and can also be used for foot massage.

There are a lot of non-slip bricks, no matter what the style is, they can be colored, which can meet your needs for three-dimensional design. Polished brick refers to the brick body that has been fired and polished on the surface as a whole to become bright, and the surface is smooth and tidy. There are also disadvantages to laying antiseptic wood:

There is a gap in the middle that is good for drainage, but the hair that falls out when washing hair is easy to flow in the gap, which is easy to cause poor drainage, so it is best to choose the way of disassembling and laying, so that it is easy to clean up and clean.

Do a detailed explanation of the problem for a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me a lot, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you. That's all for sharing, if you like me, please follow me. If you guys have any ideas, you can let us know in the comments below.

If you want to do a good job in the anti-slip work of the bathroom, you should use anti-slip tile anti-slip and anti-slip mats, and you should also choose a series of anti-slip processes in the design, or use some anti-slip agents on the ground, which can achieve an effective anti-slip effect; I have been thinking about the design of good-looking, we must pay attention to the overall color arrangement and layout, as far as possible to choose some irregular texture of the ear bricks, you can also use glass doors as a partition of the space, it is best to choose a blue decorative style, so that it looks very beautiful and generous.

Be sure to choose non-slip bricks. On the ground, you can lay an anti-travel rock slip mat, and you can apply a layer of anti-slip agent on the surface of the tile. To choose the right color matching, it is best to choose light colors, which will increase the brightness of the bathroom, and also reasonably divide the functional area.

You should choose non-slip source tiles, pay attention to the decorative effect of the floor, and make non-slip hail according to the reasonable layout of the chain space. You should choose tiles with a good color, or tiles with a massage effect, and pay attention to the aesthetics of the bathroom design.

The first and most important is the anti-slip brick, the anti-slip brick is one of the ceramic floor tiles, there are concave and convex points on the surface so that the sliding friction of the road surface and the sole of the shoe can be improved, the house is in the wet for this summer, generally speaking, it is recommended to use mosaic floor tiles, this kind of floor tile anti-slip characteristics are very good, because the mosaic floor tiles are a lot of small floor tiles pieced together, so that there will be more gaps between the floor tiles, and the anti-slip characteristics of the ground are also good.

If the actual effect of the anti-slip of the floor tiles we choose after the decoration is completed is not as good as imagined, in fact, we may use the non-slip mat as a measure for a short time, so as to avoid the soles of the feet accidentally misaligning during the bath, but at the same time, we should also pay attention to the frequent cleaning of the non-slip mat to avoid the breeding of bacteria due to dampness and cold. If the actual effect of the anti-slip of the floor tiles we choose after the decoration is completed is not as good as imagined, in fact, we may use the non-slip mat as a measure for a short time, so as to avoid the soles of the feet accidentally misaligning during the bath, but at the same time, we should also pay attention to the frequent cleaning of the non-slip mat to avoid the breeding of bacteria due to dampness and cold.

The odor-proof floor drain must be good. The average person is very easy to fall in the shower room, which is common just after taking a bath, and there is a lot of water in the shower room at the moment, which is easy to slip. Therefore, a good deodorant floor drain is very necessary.

A better anti-odor floor drain is not easy to store water on the ground after taking a bath, and it is reasonable to avoid the risk of falling due to water. When it comes to dry and wet zones, most of them are literally understood, so don't you need to distinguish between dry and wet zones. If that's what you know, that's just scratching the surface.

If this is the understanding of interior decoration, this is a waste of field, it is not as good as changing careers, otherwise the fraud is how many poor community owners.

The decoration ceiling of the bathroom must be selected with an integrated gusset, made of aluminum, on the one hand, it is moisture-proof, on the other hand, it is for the maintenance of water seepage in the middle and late stages, the triangular keel of the integrated gusset is recommended to be made of stainless steel, and the general iron is rusty in 3-5 years, and the natural environment of the bathroom is too humid. Older people have reduced balance and are more likely to fall than younger people. Therefore, if there are elderly people in the family, it is necessary to install a doorknob that is conducive to pulling in the right part, in case the elderly are unbalanced, there is a doorknob that will maintain the safety of the elderly.