What is in the toilet tank to make the flushed water foam to clean the toilet?

If you just want the water from the toilet tank to foam, you can clean the toilet by putting a solid detergent in the toilet tank, like soap, and flushing it into the toilet. However, sometimes there are some stubborn stains on the toilet bowl that cannot be completely removed directly with a solid detergent alone.

When there is a stubborn substance on the toilet, we can make it clear with some other tips, such as putting a plastic bottle in the water tank.

Put a little vinegar and water in the plastic bottle, and then poke a small hole in the mouth of the plastic bottle and put it in the toilet tank, the mixture in the plastic bottle can enter the water tank, and every time you flush the toilet, because of the pressure, the water will also flow out together, and the cleaning effect is stronger than the general toilet cleaner. <>

There is also a little baking soda that can be prepared for cleaning artifact.

and citric acid, mix baking soda and citric acid, add a little detergent and stir into lumps, and finally freeze into small pieces that are solid like soap. Throw it in the water tank, every time you flush the toilet, the citric acid and water will react, and a lot of foam will appear, this method is also very simple, and very affordable, will be cheaper and easier to use than ordinary cleaners. <>

Or mix baking soda and white vinegar together and put it in a plastic bottle, prick a few small holes in the bottom of the plastic bottle, and then let the plastic bottle rest in the water tank. It also uses the pressure of the water in the toilet tank every time he flushes the toilet to bring the cleaning in the bottle into the toilet bowl and wash the toilet bowl clean. However, when using toilet cleaner, it is important to note that toilet cleaner should not be mixed with 84 disinfectant, because it will produce toxic chlorine.

And if the chlorine produced is mixed in a confined environment.

If the concentration is too high, it may be harmful to human health. And in the use of toilet cleaner.

Don't touch it. Because there are three kinds of products: acidic, alkaline and neutral. Most of the toilet cleaners we can buy are acidic, and if you accidentally splash the acidic toilet cleaner on your body, it may cause slight corrosion hazards.

You can try Coke, Coke has a strong ability to remove dirt, you can add an appropriate amount of Coke to the toilet box, so that when flushing the toilet, there is also the function of cleaning the toilet. It is also possible to buy specialized toilet bowl cleaners online.

It is to buy that kind of blue bubble and put it in the toilet tank, which has the effect of cleaning the toilet, and there is no peculiar smell, and the toilet is very clean.

If you want to make such an effect, you can go to the supermarket to buy toilet treasure, which can not only play the role of foam cleaning toilet, but also play the role of sterilization, which is very environmentally friendly.

It should be placed under the float of the tank, in the front right corner, away from the water outlet, where the detergent will slowly dissolve in the water. If you use it for the first time, let it sit in the tank for at least 10 minutes, and then the water that comes out is the water that has a cleaning effect after soaking, which can achieve a better use effect.

Just put it into the toilet tank, and the detergent dissolves in the water, so that it can clean the toilet bowl every time you flush it.

Proper use of toilet bowl cleaner.

1. The detergent you bought is also a blue bubble, take it out of the packaging bag, don't tear off the outer protective film, this protective film can protect your hands from being stained, and this box of film melts when it comes to water, so you don't need to tear it off.

2. Put the prepared detergent blue bubbles into the lid of the toilet tank, which is the lid where the toilet flush button is located, which is called the toilet tank.

3. After opening the lid of the toilet tank, put the prepared detergent in the water tank, and place the detergent away from the outlet of the water tank or the water inlet to prevent blockage.

4. After putting the detergent into the water tank, you can see that the blue water-soluble film has melted, and the water in the water tank begins to turn blue, cover the lid of the toilet, let the blue bubble cleaner fully dissolve in the water tank, after 10 minutes, we use the horse leg to flush, you can see the water turn blue.

The toilet bowl cleaner is placed underneath the tank float. In this way, the toilet cleaner can not only slowly dissolve in the water, but also achieve a better use effect. If you have just put it in the tank, you need to wait about 10 minutes before flushing, and without tearing off the outer protective film, place it under the tank float until the color is gone.

The toilet bowl cleaner is placed underneath the tank float. In this way, the toilet cleaner can not only slowly dissolve in the water, but also achieve a better use effect. If you have just put it in the tank, you need to wait about 10 minutes before flushing, and without tearing off the outer protective film, place it under the tank float until the color is gone.

There is a drain at the bottom of the bottom or side of the air energy tank. Unscrew the screws of this outlet and the water can be drained.

When troubleshooting and maintaining household appliances, it is necessary to understand its working principle, air energy water heater, also known as heat pump water heater, also known as air source water heater, is a "heat transfer" device that uses the principle of refrigeration to absorb heat from the air to make hot water. The heat in the environment is transferred to the water through the thermal cycling process of continuous evaporation (endothermic in the environment), compression, condensation (exothermic), throttling, and re-evaporation.

There is a communicator pipe, and the toilet has an S curve and the water cannot be discharged. Unless you use a straw or something to suck it out.

Turn off the water inlet triangle valve, and then turn the water release switch.

Why should you put it all away, it's better to have a little water, and it doesn't smell ......

1. Toilet cleaning treasure. Toilet cleaner has the effect of sterilization, cleaning and deodorization, pour some toilet cleaner into the water tank for a while, and then wipe it with a rag, wipe it and then put some hot water into it, you can eliminate the dirt attached to the water tank, and achieve the purpose of cleaning the water tank. In addition, the used water in the tank can be used to flush the toilet.

2. Clean the toilet. Squeeze the toilet into the toilet without moving, soak overnight, and then brush and flush it out. Repeat it two or three times, and it will be as clean as new.

3. You can put an appropriate amount of vinegar. Vinegar has the function of disinfection and sterilization, and can also remove the scale attached to the inner wall of the water tank, because vinegar and scale are mutually neutralizing the functional effect, which can make the inner wall of the water tank more white and bright, but the vinegar only needs to be put in an appropriate amount, not too much.

4. You can directly use a cleaning ball (there is a kind with a stick) to dip some strong decontamination powder and wipe off the stain! The scale in the water tank is produced by the slow stool and is not rough and decisive, there is no way to completely eliminate it once and for all, as long as the power can be wiped frequently to keep the water tank free of scale. Moreover, as long as you wipe the mold frequently, it is not troublesome or laborious to piggyback on things by the way.