How the 2014 Elysee adjusts the rearview mirrors

Updated on Car 2024-04-10
6 answers
  1. Anonymous users2024-02-07

    Each car is equipped with 3 rearview mirrors, namely the left side mirror, the right side mirror, and the ** rearview mirror. Most cars are equipped with anti-glare rearview mirrors to prevent the glare caused by the strong light of the rear vehicle when driving at night. The exterior mirrors of the high-end cars also have an electric defogging function and a curved surface design, making them clear and at a wider angle.

    To adjust the car mirror, first adjust the sitting position and then adjust the mirror.

    **Rearview mirror adjustment method: the left and right positions are adjusted to the left edge of the mirror, cut to the right ear of their image in the mirror, under normal circumstances, you can't see yourself from the rearview mirror; The upper and lower positions are to put the distant horizon line on the mirror surface, and the adjustment point is to place the distant horizontal line horizontally on the midline position of the rearview mirror, and then move left and right, and put the image of your right ear on the left edge of the mirror.

    Adjustment method of the left rearview mirror: the upper and lower positions should be placed on the distant horizon line, and the left and right positions should be adjusted to the body occupying the mirror range of 1 4.

    The adjustment method of the right rearview mirror: because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, the ground area of the right rearview mirror should be larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4 of the body occupying the mirror range.

  2. Anonymous users2024-02-06

    On the lower left side of the steering wheel, there is an adjustment button that allows you to adjust the lens up, down, left and right.

  3. Anonymous users2024-02-05

    The heated mirrors of the Citroen Elysee can help us observe the road situation at the back of the vehicle when driving, and if it becomes blurry and unclear, it will affect our driving safety.

    In fact, the working principle of the electric heating rearview mirror is very simple, and the cost is not very high, that is, to install an electric heating sheet (electric heating film) in the lens of the rearview mirror on both sides of the first silver, in rainy and snowy weather, the owner turns on the electric heating function of the rearview mirror, and the electric heating film will quickly heat up to a fixed temperature within a few minutes, generally between 35-60 degrees Celsius, so as to play the effect of heating the lens, defogging and defrosting.

    Citroën Elysée's mirrors are useful for heating rainy days, and they heat the electric mirrors, which are the mirrors on both sides of the windows.

    First, you need to adjust the angle by hand, and the electric, Citroen Elysee has a control button on the left side of the steering wheel that can adjust the angle of the mirror. Second, the mirror can be heated automatically, so when it rains and snows, you can dry the water droplets or snow on the mirror, so that it will not affect the vision.

    Citroen Elysee's rearview mirror folding method:

    The Citroen Elysee has a button on the door panel on the driver's side that folds the mirrors. The fold button is pressed, roughly located in the upper right corner of the door, and the left and right door pairs are blindly weighed. Press this button to fold the mirror.

  4. Anonymous users2024-02-04

    1. Adjust the ** rearview mirror.

    The left and right positions are adjusted to the left edge of the mirror surface just to cut to the right ear of the image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror **.

    2. Adjust the left rearview mirror.

    When dealing with the upper and lower positions, the distant horizon line is set to **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body.

    3. Adjust the right rearview mirror.

    Because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need to sometimes park on the side of the road, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror surface. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

  5. Anonymous users2024-02-03

    Left rearview mirror: up and down position, the ground area occupies the mirror surface**; Left and right position, under the premise of ensuring that the lowest point of the rear wheel can be seen pressed to the ground, try to make the body occupy the mirror surface 1 4.

    Right rearview mirror: up and down position, the ground area accounts for 2 3 of the mirror surface, and the wheel eyebrows of the rear wheels can be seen; Left and right position, so that the body occupies the mirror surface 1 4.

  6. Anonymous users2024-02-02

    1.**The white gauge is more legible and more stylish. The orange background light when driving at night does not make the driver's eyes too tired and the mood too aggressive.

    3.The most obvious thing about the central control is that the air conditioning knob has been changed, similar to Sega, which is thicker and more advanced, and it feels very good.

Related questions
10 answers2024-04-10

First of all, the first step is to adjust the seat of the car, which the coach has taught when taking the driver's license, you must adjust it to the most comfortable position, you can clearly see the situation around the car and whether you can easily step on the accelerator, brake and clutch. >>>More

8 answers2024-04-10

Paver Start Adjustment Procedure:

At the beginning, it is necessary to determine the machine, that is, to correct the parameters. To know the unit data, that is, how many numbers or how many turns to go on the 1cm meter. The water stability is still the oil layer, if the water is stable, adjust it by 4-5cm, walk on 2-3m and then adjust it under observation. >>>More

10 answers2024-04-10

Xueba talks about insurance, focusing on insurance product evaluation! The latest 136 popular critical illness insurances >>>More

9 answers2024-04-10

Applies to: mmi: On the home screen, select: Set General date and time. >>>More

19 answers2024-04-10

Determine the position of the handbrake handle to check whether the handbrake is normal, first of all, you can check the position of the handle of the car handbrake. Normally, when the handle is lifted to 70% of the full stroke, the handbrake braking system should be in the normal braking position, so before checking the braking force of the handbrake, you should first find out this 70% working point, which can be determined by counting the ratchet sound. >>>More