How to connect the network cable socket and how to connect the network cable socket

What is the line sequence crystal head from left to right The first one is orange and white The second one is orange and that is the B line sequence If the first one is green and white The second one is green That's the A line sequence When you buy the socket, the socket is written on the top of the socket A b The connection of the two line sequences is OK if you follow it!

586a Green-White--1, Green--2, Orange-White--3, Blue--4, Blue-White--5, Orange--6, Brown-White--7, Brown--8

586b Orange-white--1, orange--2, green-white--3, blue--4, blue-white--5, green--6, brown-white--7, brown--8

There are tests that the anti-interference performance of the joint using 586B is better than that of 586A, generally there will be a logo on it, divided into A, B two connections, I also used a multimeter to test it one by one, and the results were found: B is a straight connection method (568B), A is a cross connection method (568A), and the connection method is selected according to the color corresponding.

568b: Orange-white--1, orange--2, green-white--3, blue--4, blue-white--5, green--6, brown-white--7, brown--8

568a: green-white--1, green--2, orange-white--3, blue--4, blue-white--5, orange--6, brown-white--7, brown--8

Behind the socket of the network cable, you can see the colored column, you can press 568b to do it, you can see that there is yellow, and then there is a triangular yellow, that is, yellow and white, and you can play the wire according to this, no problem.

Now there are generally line sequence signs on the wall line joints, and it is good to mark the line according to the mark.

You need special tools.

The steps for connecting the computer network cable socket are as follows:

1. There is a color identification of the wire sequence on the panel of the network cable socket, and the wiring is carried out according to this color.

2. There are generally two kinds of line sequence identification on the network cable socket, and the general home network is B line, which needs to be wired according to the corresponding line sequence of B.

3. Turn the transparent crimping plate up.

4. Push the network cable away, sort the color of the eight network cables with the color on the spring seat panel of the plugger, and then press the transparent line plate.

5. After the wire is connected, it is installed on the dark head withering box.

In the information age, the network has been completely popularized, and every household in Jiachangzheng is inseparable from the network, and the installation location of the network cable will be set in advance during the decoration. However, you need to connect the network cable yourself in the later stage, so as to ensure that the home network is unblocked. However, many people don't know how to connect the network cable socket.

1. How to wire the network cable socket.

1.First, remove the twisted pair from the box, leave a 30 cm end on the outside, and cut off the excess wire. Use a stripping tool to strip the outer wrap of the twisted pair about 10 cm long offline, and then separate the twisted pair core.

Each pair cannot be disassembled, and can only be removed by pressing the corresponding pair into the binding post beforehand. According to the color indicated by the information module, the line sequence pattern is compiled, and a line sequence pattern is uniformly used in the wiring system; Otherwise, the wiring will be messy.

2.Make the stripping parallel to the back of the module, unscrew the twisted pair by hand, and press the wire into the slot with a slight force. After pressing all the wires into each slot, use the 110 wire bonding tool to press each wire core into the slot to cut off the excess wires.

Vertical impact, if you hear a click, means that the tool groove has pressed the core into place.

3.The metal clips have been cut off until the splice sheath is bonded to the copper core. When connecting the network cable socket, pay attention to whether the knife edge is facing outward.

If the knife edge is inward, it is easy to cut the copper wire to be connected, causing the network cable to fail to connect. When the network cable socket is closed, the plastic dust sheet of the information module is buckled on the terminal post, and the wiring module is buckled on the information panel. When wiring, be sure to choose the best quality pliers.

Second, the network cable socket wiring sequence.

The network wiring is not exactly the same as the home decoration layout wires, the installation places are on the floor, in the wall, through the PVC pipe and the end to the 86 bottom box. However, the network cable receives information belonging to a network cable, and it cannot be connected in the middle, and it must go to the end. This kind of construction team is not difficult, the difficulty is to install the interface between the start point and the end point of the network cable, the installation of the network module strip located in the home information access box at the beginning point, and the installation of RJ45 Xinchen Xiangxi module at the end point.

The wiring method of the network cable socket is as follows:

1.Preparation: An electrician's scissors and a network cable are required.

2.Take the outlet apart: Use electrician scissors to take the outlet apart.

3.Remove the cord clip: Remove the cord clip from the network cable socket.

4.Wire cutting: Cut the protective skin at both ends of the network cable with electrical scissors to expose the core and stranded wire.

6.Plug in: Open the wire clip in the socket, align each core of Yuchi with the needle socket at the corresponding position in the socket, and insert it into the socket.

7.Cut the terminal: Use wire strippers to cut off the excess part of the network cable.

8.Fixed plug: Fix the plug on the socket to complete the wiring of the network cable socket.