How to make your own wall clock, the features of an old fashioned wall clock

An alternative log handmade clock, a clock to help you walk to the forefront of fashion

Tools Raw materials.

Materials: clock core, puzzle board, KT board or wooden board, colored wrapping paper to be stronger, pens, scissors.

Method steps.

Prepare the materials you need. Then use a jigsaw puzzle board to put it together on colored wrapping paper and spell out its size and pattern.

Next, you need to pull the colored wrapping paper out from underneath. When you pull it out, turn the colored wrapper upside down to show the back of it, and then put the puzzle on top. Use a knife to carefully mark the colored wrapping paper according to the pattern of the puzzle.

Now the general pattern of our wall clock is out, and then compare our battery box with a good position on the diagram, and after the comparison is done, we will make a hole in the place where the hole is installed with screws, and then install it, and the last step is completed.

Now the step is to attach the board to the back of the colored wrapping paper to make it stronger. Next, it's time to make the numbers for the wall clock, and first draw the shape of each number.

Once the shapes are drawn, they are cut out one by one, and then the next step is to paste them in the corresponding position of the wall clock.

Finally, then stick each one up, and now put the pointer on it.

The hands are also installed, and now the whole wall clock is ready.

The function of the old-fashioned wall clock is mainly to keep time, and some have the function of telling the time on the hour. The wall clock was first evolved from the tower clock, and in the 16th century, there was a large tower clock building in Europe, which was limited to the manufacturing technology at that time, and the clock was generally larger.

With the development of technology, in the mid-20th century Japanese quartz clocks.

Technological breakthroughs and applications in horology. Whether it's a clock, a wall clock, its hours, minutes, and seconds will run non-stop.

Common sense when buying a wall clock.

When buying a wall clock, you should also pay attention to its material. In general, a wall clock consists of components such as a movement, mirror, wall clock hands, and housing. The material and workmanship of each component determines the quality of the wall clock.

Of all the ingredients, the movement is the most important, and the ones on the market are divided into ordinary and scanning movements. The scanning movement is relatively good, as there is no movement of the tick needle, so it is quieter.

A piece of cardboard or waste cardboard box, with a compass, a plate for eating, a disc and so on, draw a circle on the cardboard and cut it out. Add a small hole in the positive ** of the disc with an awl, take a scale to evenly distribute 12 points, draw it against the clock at home, and the dial is completed. Pierce the needles of all three needles so that they can pass through the screws.

Thread all three needles to the screws, and then thread the screw caps on the back of the dial through the dial to complete the handmade clock.

Extended Information] 1. Clocks and watches (clocks and watches) are precision instruments that measure and indicate time. Clocks are usually distinguished by the size of the inner machine, according to international practice, the diameter of the movement is more than 80 mm, the thickness is more than 30 mm, and the diameter is less than 37 mm. Primitive man judged time by the change in the color of the sky and the luminosity of the sun.

Ancient Egypt discovered that the length of shadows changes with time, the ancient Babylonians invented the sundial to keep time in the morning 6,000 years ago, and they also discovered that the time required for the flow of water is fixed, so they invented the water clock. The ancient Chinese also had a tool to keep time with water - copper kettle dripping, and they would also use incense to keep time. Place the incense horizontally and place a rope with steel balls attached to it.

Between 140 and 100 BC, the ancient Greeks made timers for the Olympic Games with a system of 30 to 70 gears. Known as the Antikythera Instrument, the instrument consisted of 29 interlocking copper gears and dials, the size of a lunchbox. It was discovered in 1901 on an ancient shipwreck near the Greek island of Antikythera, hence its name, and is now preserved in the National Archaeological Museum of Greece.

2. In the 17th century, pendulums and laws gradually appeared. The precision with which it operates has been greatly improved. Giovanni de Dandi is known as the father of European horology.

It took him 16 years to create a fully functional clock, known as the Cosmic Armillary Sphere, which could represent the orbits of some of the planets in the sky, as well as reflect religious holidays and the time of day, and it began to be used in 1364. The clock made by Dandi was not the first clock in Europe. It is said that the first chiming clock in Europe was made in Milan in 1335.

3. Clock calibrator, calibrator is an indispensable testing instrument for the maintenance of mechanical watches. It is mainly used to determine the speed of a clock. The paper tape recorder can also check for defects in the operation of the watch according to the shape of the recorded lines, so as to determine the cause of the failure.

There are many types of calibrators, including digital display type and paper tape recording type. There are two types of paper tape recordings: one is to record graphics (i.e., lines) and the other is to record numbers.

It is advisable to use the form of record diagram for maintenance. When calibrating the watch, the watch to be tested is placed on the microphonic 8, and the handle should be placed in the fixing clip, and then the watch is clamped with a movable fork. By turning the microphonic box, the instantaneous daily difference of the six different positions of the watch can be measured.

Clocks hung or placed in the east and southeast should be mainly green and cyan, and the shape should be square for auspiciousness. Because these two directions belong to wood.

Clocks hung or placed in the south should be mainly red, purple, and orange, and the shape should be octagonal for auspiciousness. Because this direction belongs to fire.

Clocks that can be placed in the southwest and northeast should be yellow and brown, and the shape should be square for auspiciousness. Because this direction belongs to the earth.

Clocks that are hung or placed in the west or northwest should be mainly white and gold, and the shape should be round and auspicious. Because this aspect is golden.

Clocks hung or placed in the north should be mainly blue and black, and the shape should be round for auspiciousness. Because this direction belongs to wood.

The bell is moving, with the meaning of turning, with the function of removing the old and welcoming the new, and also has the effect of repeated changes. Therefore, the placement of the bell must also be exquisite.

1) Only one main clock is required, and no more than one small alarm clock in the rest of the room. If there are too many bells in the house, the atmosphere in the house will be unstable, and the people in the house will often have repeated troubles.

2) The clock in the house should be square, try to avoid using circles, triangles, hexagons or octagonals, etc. Because the round bell will make the people in the house uneasy, and the other shapes of the bell will cause the house to hold up disputes. Only the square clock is the most peaceful.

3) The bell in the bedroom should not be big, as it will make people restless, restless, and gather less and leave more.

4) It is not advisable to place a Big Ben in a small residential area, because on the one hand, it is noisy, and on the other hand, the sound of the bell is also a sound, which will make people feel a sense of fear and have the effect of emptiness.

5) Zhong Yi should hang on the auspicious side and face the evil side, so that it can block and turn away from the opposite evil object.

Precautions for placing the clock in the living room:

1) It can be placed or hung on the Vermilion Bird side, because the Vermilion Bird side is the front (south), and the front belongs to the movers;

2) It can be placed or hung in the Qinglong side, because the Qinglong side is auspicious (east), so the left side of the living room should also be placed on the clock;

3) Do not place or hang on the white tiger side, because the white tiger side is the fierce side (west), so the right side of the living room should not put a clock;

4) Do not place or hang on the Xuanwu side, because the Xuanwu side is the rear (north), it should be quiet and not moving;

5) The clock should not be hung above the sofa, otherwise, people who often sit in this position are prone to physical problems;

6) Place or hang the clock in the bedroom, roughly the same way as the living room on the bench, but do not hang the clock at the head of the bed and the end of the bed.

The manual method of making clocks and watches is as follows:Material preparation: paper, pen, round bottle cap, scissors, pushpins.

Operation steps: 1. First, put the bottle cap on the red cardboard and draw a circle with a pencil.

2. Then use scissors to cut out a circle along the drawn track, draw the center on the red circle with a pen, four points up and down, left and right, and then mark on the red circle to evenly mark the other points (12 in total).

3. Then mark the numbers 1-12 in a clockwise direction, and the clock dial is ready.

4. Use different colors of paper to cut out three hands of different lengths and a small center circle, and then use a thumbtack to nail the three pointers and the small center circle together, and nail them to the red dial together.

The steps to make a watch by hand are as follows:1. Use compasses, plates, discs, etc. for eating to cut out two circles of the same size, smear glue on one round cardboard, and glue the other round cardboard to it firmly as a dial.

2. Cut out 2 pointers and 12 small circles.

3. Then cut out the 12 black numbers and glue them firmly with the small circle cardboard.

4. Then paste the 12 numbers evenly on the dial, and finally nail the pointer and the dial together with a pushpin.

We can draw our favorite pictures on the clock and make a clock of our own style, which is the handmade steps of the clock.

Hello, I'm glad to answer for you, I'm Xiao Liu, a co-teacher who asks a question, good at building materials, and has been engaged in the building materials industry for 3 years, and I'm happy to serve you. How to install a wall clock? 1. Rub the bell base with glue or double-sided tape; 2. Then put the old position of the clock face at 12 o'clock and stick it in the vertical position of the bell hook; 3. Put the wall clock movement into the clock base and fasten or lock it; 4. Then to the wall clock hand, first remove the protective film of the clock hand, and the end of the hour hand is aligned with the 12 o'clock position to install the minute and second hand repeatedly, and the distance between the needles is about 3mm; 5. Install the battery to test whether the wall clock is worn by needles and other frictions; 6. After the test is completed, install the wall clock mirror and lock the upper frame with screws.