How to make a skateboard, how to skateboard teaching

Teach you to make a solid wood skateboard, drag cool, this skill is no one

The skateboard surface is pressed out, generally 7 layers of maple, put together and cold-pressed.

1. Prepare materials: a solid wood board, white spray primer, red spray paint, spray varnish, seagull frame, wheels, bearings, skateboard bolts and nuts.

Second, do the investigation of the Sun Law:

1. Use a saw to cut the wooden board into the shape of a skateboard, polish the edge and the entire sliding ridge surface;

2. Draw the center line of the board, determine the hole position of the front wheel and the rear wheel flange plate according to the defeat chain gull frame, and drill the hole;

3. Spray paint, primer, topcoat and varnish are sprayed in order;

4. Install the seagull frame and wheels.

Here's how to skateboard:

There are two ways to stand on the slideboard: one is to have the left foot in front and the toe to the right, which is also called the forward standing method; The other is with the right foot in front and the toe to the left, which is also called the reverse standing method.

Friction Ride: The rider places the right foot on the middle front of the skateboard. Step on the ground with your left foot and focus on your right foot.

Push the ground with your left foot to slide the skateboard forward, then put your left foot up and step on the back of the skateboard, maintain your standing balance, slide for a while, and then press the ground with your left foot and repeat. After practicing this repeatedly, you will be able to do longer distances after mastering it well.

Obstacle skating: In slalom, speed stops and sharp turns are very important skills in slalom. When sliding down the slope, the speed is relatively fast, so you must learn to use the stop method of keeping your feet on the skateboard and turning the skateboard to brake laterally.

Downhill skiing: Try to choose a longer slide, preferably with a combination of fast downhill sections, medium speed slides, and buffer sections that extend farther, this kind of slide is best for beginners to practice downhill skating.

Circle Technique: The skater pushes the skateboard forward, then stands up with both feet straddling and the left foot can move flexibly. Press the weight against the end of the board so that the end of the board is lifted by an inch or two.

When the plate end is in the air, the body rotates in a clockwise direction; When the front wheel hits the ground, the skateboard is deflected to the right. Stick this series of movements together and practice them over and over again.

Trick Down: When approaching the hill, shift your weight to your back feet. When the end of the board crosses the ridge, lift the front wheel. Hold this position, squat down slightly, and get ready to land.

Technique: When approaching the sill, the skater shifts the weight to the back foot and lifts the end of the board to jump over the edge before reaching the sill. Quickly shift your weight from the back foot to the front foot in the air. Press the tip of the skateboard onto the steps so that the tail of the board also goes up the steps.

Reverse technique: Slide forward so that it reaches the appropriate speed, and spread your feet as far as possible across the ends of the skateboard. Place your weight on the front foot, i.e., the left foot, so that the tail of the board is cocked while rotating 180 degrees clockwise (backwards or outwards).

If the movement is correct, when you're done, the skateboard is turned upside down and your right foot becomes the support foot.

Upper and lower boards These are two more introductory moves that are relatively simple for beginners. Dolphin jumping is the most basic skateboarding technique in skateboarding. As long as you practice Ollie well, it will be much easier to practice other movements.

Manually slide the rear wheel. When coasting, use the rear wheel rotation to balance and maintain a certain speed. After the rear foot lightly presses the tail of the board and lifts the front wheel (the tail does not touch the ground), only the rear two wheels slide.

Nose manual Slide the front wheel, contrary to the action of a manual transmission, which is one yard more difficult than a manual transmission, and is not easy to balance.

4.Keep Flipping Tipping is a road-style action. Before learning this move, be sure to practice Ollie well (so it's important to practice Ollie well in Chongduanre!). , the back foot is placed at the tail of the board (the center of gravity of the sole of the foot is placed in the middle of the board tail), the front foot is placed near the screw, about 45 degrees away from the edge of the board, and the two heels are best placed on the outside of the board edge.

5.Heel Flip Flip, similar to a toe flip, but with a different front foot position, Ollie kicks the front inward from the front heel. Be careful not to push too hard while leaving the skateboard. After the board is rotated vertically 360 degrees, you can use your feet to connect the board and scatter it.

When skateboarding, put your front foot forward and your other foot on the ground. Decided on the front foot.

Now, let's take a look at how to lift the board with the help of supports. Hold on to the wall with both hands and let the wall help you get on the board. Keep your feet parallel and your back straight.

The front foot rests on the board and the leg is bent. When you first close the plank, the legs are vertical. Adjust slowly on your own and start skateboarding with your feet parallel.

No support is required, maintain the correct posture, bend the knees, and quickly get the upper board with the back legs.

If you want to skateboard well, you need to practice often.

1 Practice gliding with a fixed center of gravity and leaning forward.

2 Practice turning, pressing the plate with one foot and raising the other slightly.

3 When you are about to fall, use your hands and body to rotate properly.

4 Practice stopping, go down directly and pick up the skateboard or rub your feet against the ground to slow down.