Can I overclock my computer s configuration, and if so, how can I overclock it. Thank you.

The overclocking ability of this U is very weak, overclocking does not have much performance improvement, if you really want to overclock, here are the steps.

You turn on the boot and press del to enter the BIOS, and enter the first item MB Intelligent Tweaker

The CPU frequency(MHz) parameter is set to 230 to take a look, if you can continue to adjust it.

Frequency 230 If it doesn't work, you can only add the voltage.

System Memory Multiplier (SPD) memory multiplier adjustment.

dram timing selectable(spd)

Memory adjustments. manual Adjust it manually.

Most Intel CPUs don't support overclocking, only a few CPUs with thousands of dollars can, and your CPUs belong to the majority. In addition, overclocking and turbo are two different things, don't be confused, the turbo frequency is that the CPU automatically adjusts the operating frequency according to the load. Well, overclocking is not a good thing, it hurts the hardware, and the requirements for heat dissipation are relatively high, if you have extra money to buy a cooler, it is better to spend more money to buy a better CPU at the beginning, which is far more cost-effective than overclocking.

So now, except for the top CPUs, in order to pursue the ultimate performance beyond the limits of the current level, they will not choose to overclock.

The landlord enters the BIOS, and the external frequency is directly on 266

Just your configuration is typical of office computers, and there are multiple graphics cards, what frequency is over.

Dear, I recommend that you don't turbo anymore, the CPU that wants to turbo is generally above the second generation i5, and the turbo frequency is risky, why bother!! Do you want to do a lot of floating-point arithmetic!!

Like my CPU, just go into the BIOS and adjust the external frequency! Overclocking is possible, but it is not recommended.

This U-heel board doesn't seem to support overclocking technology.

The so-called overclocking is to increase the operating frequency, mainly the frequency of the CPU, to improve performance.

Laptops, most of which cannot be overclocked, are prohibited in the BIOS, but you can use software to overclock in the system.

However, it is not recommended that you overclock because:

1. Overclocking is a bit risky, especially laptop overclocking.

2. Why do so many manufacturers prohibit laptop overclocking? Because one of the biggest problems with laptops is heat dissipation, overclocking will increase the heat, causing you to crash, and the gains outweigh the losses.

3. Desktop overclocking failures are easy to disassemble and recover, and notebooks are inconvenient.

Hope it helps.

My notebook is Acer 4315-200512, the CPU is Saiyang, the motherboard is 960, I have read a lot about it, I suggest you don't overclock, I recommend you change to a discrete graphics card, overclocking hurts the CPU, if you insist on overclocking,

Overclocking is all about keeping your computer working at a frequency that exceeds the default frequency.

For example, if you let the CPU work in the state, it is considered overclocking.

A little bit of configuration can be super.

The main thing is that the motherboard supports setting in the boss, such as adding voltage to change the working frequency.

Overclocking is the use of the CPU beyond the frequency used. That is to say, 1G CPU, over 2G to use, overclocking the computer performance will improve a lot, but you need to have a very good cooling system, fans alone are not enough, after overclocking the computer heat dissipation will become larger, and there is the motherboard to support.

Overclocking a computer is to artificially increase the working frequency of hardware such as CPUs and graphics cards, so that they can work stably at frequencies higher than their rated frequencies.

1.Jumper settings are overclocked.

Most of the early motherboards used jumpers or dip switches to overclock. In the vicinity of these jumpers and dip switches, there are often some ** printed on the motherboard, which records the functions defined by the combination of jumpers and dip switches. In the shutdown state, you can set it according to the frequency in **.

After rebooting, if the computer boots up normally and runs stably, it means that our overclocking has been successful.

Set up overclocking. Nowadays, mainstream motherboards basically abandon the jumper setting and DIP switch setting method to change the CPU multiplier or external frequency, and instead use more convenient BIOS settings.

AMD has the best overclocking. It's the same for both odds and slabs. Boot press del to set it from the BIOS.

The default frequency of this CPU is,The system will turbo frequency according to the size of the workload system process,This CPU can be turbo up to,Even if the CPU is fully loaded,The general system will not turbo the CPU to the highest turbo frequency,Turbo frequency can be simply and rudely understood as the meaning of automatic overclocking,I hope it can help you。

Overclocking is possible, but it is not recommended for 3 reasons:

1. CPU supports overclocking, but:

The x4 730 is locked [multiplier], if overclocked, it can only exceed [external frequency].

You can try to modify the external frequency, if you can't modify it, you can't overclock; You need to go to the BIOS to see the relevant settings.

The performance of the X4 730 is inherently low, and the overclocking room is even lower, which outweighs the benefits.

2. The A58M motherboard supports overclocking, but:

The A58 is the lowest-end motherboard chipset model, with insufficient CPU power and very low overclocking potential, which is very tolerant of burning out the motherboard.

3. The bottleneck of your configuration performance is the graphics card, and GT610 is currently the lowest-end graphics card on the market, and there is no one.

Boosting the graphics card is the key, not the CPU.

This CPU does not support overclocking, AMD's CPU itself consumes a lot of power, overclocking is best with Intel's, and there is that your graphics card is too low-level, it is the lowest graphics card at the moment, and you can play games without playing games, and you can't do mapping.