The router drops frequently and the router needs to be restarted to access the Internet normally10

Updated on technology 2024-04-30
5 answers
  1. Anonymous users2024-02-08

    This phenomenon of this problem, it may be the normal computer ** to grab bandwidth, his computer software sent to you, ARP attack router, computer system poisoning hair virus attack network blockage, the first thing to see the problem, there is its own set of IP can ping the router. To solve the problem of internal cyber attacks, you can completely solve the immune wall technology, and the immune wall technology deploys the immune network solution. With the immune network solution, your network doesn't need major changes, you can use the immune wall set policy, don't install drivers, get online, install blocking.

    It will be possible to directly issue an alarm to intercept virus attacks from each computer, on top of the unified management card, only one network administrator can monitor the entire Internet and intranet computer anomalies accurately.

    Alpha. alpha

  2. Anonymous users2024-02-07

    The following is speculation, but you can try. Judging from your analysis, it should not be a problem with routing, but only a problem with the network card you bought, and it is speculated that one party fakes death when the wireless network card and routing exchange data, causing the other party to frequently send failure messages and causes fake death, and then you can only restart. Software problems don't feel likely, after all, your routing is not a software meal, he only cares about packets.

    So if it doesn't work, borrow someone else's wireless network card and try it, and if that's it, then buy another one

  3. Anonymous users2024-02-06

    Is it normal not to use a wireless network card? Maybe it's a software conflict, right? Otherwise, there may be a problem with the wireless router.

  4. Anonymous users2024-02-05

    It may be that the signal is not good, and the connection between the computer and the router is often interrupted. If the connection is interrupted, the computer will try to reconnect and request a new IP address. However, the router may think that the computer is still connected and refuse to send a new IP address, resulting in the computer not receiving the assigned IP address and not being able to access the Internet.

    After restarting the router and emptying the list, the computer will be able to get the IP address and surf the Internet normally.

    If the wireless signal is poor or unstable, it is likely that this is the case, and it is recommended to replace it with better quality hardware.

  5. Anonymous users2024-02-04

    The wireless router is unstable and the possible reasons for the disconnection are as follows:

    1.There may be strong sources of signal interference next to the wireless router, such as microwave ovens, cordless **, magnets, etc. The wireless signals and magnetic fields emitted by these devices will affect the stability of the router's wifi signal.

    Workaround: Keep your wireless router away from these sources of interference.

    2.The router firmware and hardware do not match, causing the router to work abnormally and causing the WiFi connection to be unstable.

    Workaround: Update or roll back the wireless router firmware to find the best firmware version.

    3.The Wi-Fi optimization function is enabled, the connection function in poor condition is not used, and the Wi-Fi connection is not checked in the sleep state. Turning on these features will disconnect the phone from the wireless router in certain environments. If power saving is not considered, it is recommended to turn it off.

    Solution: Disable Wi-Fi optimization, Disable Do not use connections in poor condition, and select Keep Wi-Fi connections in hibernate state.

    4.The Wi-Fi transmission power of the wireless router is too small, or the device is too far away from the router and there is a shield in the middle. If the wifi signal is too weak, it will also drop from time to time.

    Solution: Set the maximum power of the wireless router to shorten the distance between the wireless router and the device to minimize obstacles.

    5.When there are multiple wireless routers nearby, the same channel may affect each other.

    Solution: Change the router channel to channels 1, 6, and 9 to reduce the mutual influence caused by signal overlap.

    6.The hardware of the router's wifi transmitter module or mobile phone's wifi receiving module is faulty, causing the wifi to be disconnected.

    Workaround: Replace your wireless router or phone.

Related questions
14 answers2024-04-30

How many machines do you follow? If it is more than 6 units. It is recommended that you change to a better router. >>>More

10 answers2024-04-30

I don't know what you mean by the network cable is the landlord's? It's really hard for you. >>>More

13 answers2024-04-30

Setup for both routers:

1. The router used to connect to the external network is the first router, and we will use this router as the main router. If your router is newly purchased and has been restored to factory defaults, then its IP should be... >>>More

4 answers2024-04-30

There are some reasons why routers are good and bad:

1. Hardware problems with the router itself. When encountering an unstable router signal, the first thing to consider is the router itself. For example, there is poor heat dissipation of the router in summer, and the internal hardware of the router is very hot. >>>More

7 answers2024-04-30

There are two situations, first: your computer is poisoned by ARP, as soon as you start the Internet virus, trick other computers into sending data packets to your machine, and your computer throws away these packets, their computer will not be able to get on, use 360 to kill the virus. >>>More