What should I do if the wall falls off, and what are the symptomatic treatment methods to save money

Then choose some cheaper wallpaper to fill in the gaps, so that it is more cost-effective.

I recommend that it would be better to put wallpaper on the wall after painting.

Flatten it and then buy the corresponding things to scrape it again, just like the putty wall at home, if the wall falls off too much, it is flattened and scraped once with putty.

No matter what it is, there are times when it breaks down over time. The same goes for the house. If it is not repaired and maintained for a long time, it will produce some damage.

In the house where we live, the wall skin is a particularly vulnerable part, not only will cracks, but sometimes often fall off. We can't do anything about the damage after it has been caused, as cracks and falling off the walls can seriously affect the aesthetics of the walls. In addition, in severe cases, it will also cause some dust and garbage.

Causing trouble for hygiene issues. If you have small children at home, accidentally inhaling too many such things will affect your health. To solve such problems, we can:

Scrape off the skin that will fall off, repaint it, and then reinforce and maintain it.

If it is only partially shed, then our method is the most cost-effective and labor-saving。The tools to be used are usually available at home. Or you can use some unused cards to scrape off the wall.

When scraping, we can put a newspaper under the wall. So that it can be cleaned up in a while. Then use some gentle brushes to repaint the wall.

Finally, paint again.

The next step is to carry out the maintenance workAfter brushing, let it dry some. Wrap yourself on your walls. It means to choose a suitable wallcovering for your wall.

It's better to choose something soft. In it is possible to brush some latex paint. Latex paint is the best means to protect the wall.

After all these operations, just wait for the paint to dry.

These methods are effective methods in the face of local sheddingBut if a large area falls off, we can find a professional company to maintain and renovate.

After the wall falls off, we should first redecorate, and the labor-saving method is to hang it directly with a mural.

Clean up the falling off area and apply wallpaper directly.

After the wall falls off, shovel the rest off and apply the wallpaper with glue.

If the wall falls off, you can choose to paint it or paste wallpaper.

The wall is falling off, you just buy wallpaper to cover it, or buy boards.

In two cases, if only the paint layer of the wall falls off, it is necessary to remove all the paint layer, and after the wall base layer is cleaned, the putty is re-brushed and finally painted. The cement layer on the wall is peeling off, which requires all the peeling areas to be removed and the holes clean to ensure that there are no hollows. Then, use solid wall adhesive to coat the group to achieve the purpose of reinforcing the base layer.

After the treatment of the base layer of the wall, mix some cement with 108 glue to pull the wall surface, and then use solid wall glue and cement Huang Chatan dry sand to mix these materials evenly and paint, and finally wait for the cement to dry through.

Causes of wall falling off:

1. The peeling off of the paint layer is generally caused by the reduction of the process during construction and the influence of environmental humidity, which are more common. For example, putty and paint are brushed less, room leakage, etc., generally appear in toilets and bathrooms. Of course, there are many other reasons, such as the relatively long age of the renovation, the use of inferior decoration materials, and so on.

2. The reasons for the fall off of the cement layer of the wall are more complicated, the ratio of cement and auxiliary materials is problematic, the temperature is low during construction, the number of cement is not enough, the cement is placed for a long time after mixing, it is not used, and the cement is not evenly smeared during the construction process, which will lead to the phenomenon of cracking and falling off of the cement layer of the wall after construction.

<> "After the house has been used for a long time, the wall is prone to fall off, which affects the aesthetics of the wall, so how to deal with the wall falling off?

1. How to deal with the wall falling off.

1. If the area of the wall is relatively small and slight, you can use a shovel to remove the wall surface that falls off and the surrounding position, and then scrape the putty once, and after the putty is dry, then re-prime, and then paint.

2. If the wall peeling off area is more and more serious, the entire wall must be removed clean, until the wall base, followed by cavity culture on the base layer of a layer of interface agent, then use gypsum to level the wall, and to hang a mesh cloth on the wall, and then on the wall 3 times the wall lining, and need to be polished and smoothed, and finally painted primer and topcoat.

Second, how to protect the wall from falling off.

1. When decorating the wall, many friends will ignore the original empty imitation Li drum and cracks on the wall, and feel that they will not be able to see it after painting latex paint in the later stage, in fact, this idea is wrong, if there are cracks on the wall, a caulking belt should be installed at the cracks to avoid the wall from continuing to crack, and then start the wall decoration construction.

2. There are many factors that cause the wall to fall off, such as: wall coating, wall interior, etc., many friends in order to save decoration costs, will choose not to remove the putty layer of the original wall, but the construction quality of this layer of putty layer made by the developer is generally poor, and it will be smeared thicker, in order to effectively avoid cracks and falling off of the wall in the later stage, it is recommended that you should remove the putty layer cleanly, and then re-carry out the base construction.

The above is a detailed introduction to how to deal with the wall falling off and how to protect the wall from falling off.

1. Re-scrape putty. If the wall has some stool trembling and slight cracking and peeling, the wall peeling treatment is to remove the problematic part of the hole, then smooth and scrape off the putty powder, and repaint it in stages.

2. Direct roller brush finishing and covering. If it is a simple fading of the wall, it can be repaired using the paint renewal method.

3. Before construction, it is necessary to judge the current state of the original wall putty layer, if there is no spraying or falling, it means that there is no problem with the putty layer, at this time, only fine sand can be used to polish the wall and recoat the primer and topcoat.

There will always be some headaches when renovating a house, such as bursting water pipes, bulging wooden floors, wall edges and wall separation. We have to retain some experience to deal with them. So,How to deal with the falling off of the wallWhat's there?

How to do wall base treatment?

How to deal with the falling off of the wall- Heavy-duty putty.

If the wall has partial walls or has slight cracking and spalling,How to deal with the falling off of the wallThe problematic part is removed before the brother is removed, and then the putty powder is smoothed and scraped off, and the paint is repainted in stages. The downside of this method is that there will be a color difference between the new complement and the surrounding wall color.

How to deal with the falling off of the wall- Direct roller brush finishing and covering.

If it's a simple fade of the wall, you can fix it using the paint update method. Before construction, it is first necessary to judge the current state of the original wall putty layer. If it is not sprayed or dropped, it means that there is no problem with the putty layer.

At this point, only fine sand can be used to polish the wall and reapply the primer and topcoat.

How to deal with the falling off of the wall-- Grassroots treatment.

If there are many cracks, peeling and dust falling on the wall, the problem is more serious and the action may be greater, which is equivalent to updating the entire wall. First, the original wall of the cement layer is removed, the base of the wall is leveled, the primer is cured and the interface coating is applied. Then scrape the waterproof frankincense powder 3 times in stages and repolish the walls.

Finally, apply the primer once and brush it twice to complete the effect.

1. Sealing. First, remove the surface of the empty wall, soak the white powder layer of the wall with water, and then wipe the wall with a shovel. The surface agent of the wall roller brush then cleans the floating ash to improve adhesion.

Finally, the flattened repair mortar is used for the repair of hollow drums, wire channels and groove joint treatments.

2. Leveling treatment.

If it is a flat wall, you do not need to level the patching mortar, you can use waterproof putty to level it. After handling the rules, the waterproof adhesive can be scraped off and constructed according to the structural requirements of the mastic. In particular, attention should be paid to proper and uniform mixing, batch thickness and sanding to avoid human problems caused by improper construction techniques.

3. Primer and base film.

If the decorative layer is brushed, as long as this putty is polished, the surface is cleaned and can be applied based on alkali resistance. Although the primer is applied once, uniformity must be ensured and then dried to the next step. If the wall is chosen as paper, you must first brush a base film.

4. Brush or wallpaper.

Wall paint is usually applied twice per roll, with an interval of 2 to 4 hours or more between each application. After the second layer is completed, it takes 1-2 days to dry. Before the paint dries, pay attention to sunscreen, dust and water resistance to avoid problems with the paint film.

Tuba Rabbit** provides you with "various decorations**, 1-4 local decoration companies, 3 sets of decoration design defense dust cases" for free, as well as decoration pit avoidance strategies! Click on this link: Carry the shout

You can get it for free

1. Re-scrape putty. If the wall has parts of the wall or has slight cracking and peeling, the wall peeling treatment is to remove the problematic part, then smooth and scrape off the putty powder, and repaint it in stages.

2. Direct roller brush finishing and covering. If it is a simple fading of the wall, you can make a non-liter paint update method to repair it.

3. Before construction, it is necessary to judge the current state of the original wall greasy and withered Lao Zi layer, if there is no spraying or falling, it means that there is no problem with the putty layer, at this time, only fine sand can be used to polish the wall and recoat the primer and topcoat.