What to do if the walls of the house are hairy? How to deal with long hair on the wall?

Long hair is actually mold growing, my method is to wipe the hair on the surface with a rag, and then wipe the wall with a clean towel dipped in the original solution of 84 disinfectant, the wall can both whiten and prevent mold from continuing to grow, this is how our home is treated. Prevention in the general sense: a:

Do a good job of insulation; 2. Reduce indoor humidity; Three: more ventilation indoors.

Four. It is to choose high-quality building materials to re-do a thorough wall transformation, do a good job of external wall insulation (note, external wall insulation and external wall insulation are completely different), block the conduction of heat to the wall, only do the external wall internal insulation is not a fundamental problem, only do the external wall internal insulation layer, wall mold is still breeding.

Five. It is the use of professional wall mildew and moisture-proof liquid, the inner wall mildew and moisture-proof liquid can kill and quickly decompose the mold generated on the surface of bricks, stone, cement, tiles, coatings, wallpaper, wood and various decorative materials in a short time, and restore the original color of the wall within 15 to 30 minutes, so that the mildew wall can be restored to its original state without damaging the wall, inhibiting mold regeneration for a long time, and has the functions of penetration, waterproofing, increasing brightness and whiteness, and increasing wall density. Construction precautions:

The substrate is dry, and the temperature is 5-20 is optimal. There are many solutions to moldy and hairy walls on Aiju, and I hope the landlord has time to check and check it, which will help your problem.

Why does the wall grow hair in winter, and what should I do about it?

Hair grows on the walls of the home, not ordinary hair, but a mold that grows easily in moist, warm conditions. These molds not only hinder the beauty of the wall, affect the smoothness of the wall, but also endanger the health of the body, and should be eliminated as soon as possible. The method of treating the long hair on the wall is as follows:

1. Strengthen indoor ventilation; Maintaining good ventilation can disrupt the growth conditions of mold and hinder the formation of mold. Usually, at home, you can open the windows to let the outside wind in, causing air convection. 2. Reduce indoor humidity; A damp and dark environment is a breeding ground for mold growth.

So, don't give mold room to grow, find the walls damp, and you should dry them in time. On sunny days, multi-ventilation and ventilation are used to keep the room dry. 3. Use high-quality building materials to redo wall transformation; Do a good job of external wall insulation (note that the external insulation of the external wall and the internal insulation of the external wall are completely different), block the conduction of heat by the wall, and only do the internal insulation of the external wall can not fundamentally solve the problem. Fourth, the use of professional wall mildew and moisture-proof liquid; The mildew and moisture-proof liquid on the interior wall can kill and quickly decompose the mold generated on the surface of bricks, stone, cement, ceramic tiles, coatings, wallpaper, wood and various decorative materials in a short time, restore the wall to its original color within 15 30 minutes, restore the mildew wall to its original state without damaging the wall, inhibit the regeneration of mold for a long time, and has the functions of penetration, waterproofing, increasing brightness and whiteness, and increasing wall density.

Construction precautions: the substrate surface is dry, and the temperature: 5-20 is the best.

The long hair on the wall is a phenomenon caused by the deterioration of the white after the water vapor enters the wall and reverses from the white. If the walls are not leaking but only the walls are hairy, it can be determined that the water seepage from the wall or roof is the cause. Unlike leakage, water seepage is a slow process, and its cause is two possibilities: one is caused by cracks in the façade of the wall; The other is that the last time your home was rebuilt and waterproofed, some details such as corners and joints were not covered well, and water seeped down these places to the wall.

If the wall mortar is not full and there are too many gaps, once it rains in summer, the house will definitely have a reverse moisture phenomenon. There is also the possibility that the brick walls are thin and the temperature difference between indoor and outdoor is large. In this case, dampness will form in the wall, and if the ventilation is not smooth, it is easy to cause mold.

At present, many houses are built with a combination of concrete and brick. The heat transfer speed of concrete and brick is different, if the insulation layer of the building is not done, resulting in a large temperature difference between indoor and outdoor, coupled with the humidity of indoor air, and do not pay attention to ventilation, it is easy to breed mold in the combination of two building materials. In addition, if starch is added to the paint used to paint the walls, it is also prone to mold growth in a warm and humid environment.

It is recommended to remove the concrete base layer at the moldy hairy area to a depth of 3 cm and apply a special interface agent (perhaps the interface agent can be exempted, because the area is not large after all). This point needs to consult the sales department), smeared with a good insulation adhesive powder, pressed with a glass fiber mesh cloth, and then smoothed with a special cement anti-crack mortar. All that's left is to scrape the white and reapply the latex paint.

After adding water, the insulation rubber powder becomes an insulation glue, which is in the form of a paste. Compared with the insulation board, its advantage is that it has good adaptability to the base construction of the structure with low flatness, and is easy to correct and level.

The wall long hair repair and management find the United States Cube environmental protection repair, and sign a contract for treatment. U.S. Cube environmental protection specializes in the treatment of long hair and moldy walls.

1. Reasons for the growth of hair on the indoor wall:

1) One of the reasons is that there are gaps in the outer tile and waterproof layer and the low density of the outer layer of sand ash, and the cement ash is not enough, resulting in the cold penetration of the wall, the uneven cold and heat of the inner wall and the outer wall, after the contact of the cold and hot bridge, at the same time, the high saturation water vapor in the house contacts the wall, and forms a moist surface layer on the wall, which is the best growth environment for mold.

2) The second reason is that the builder compresses the construction period when building the house, is busy with delivery, and is busy with decoration after delivery, the wall is not dry, and the moisture is covered in the wall during decoration, and the ventilation and breathability are poor, resulting in mildew and long hair on the wall.

3) The third reason is that the window is not in close contact with the wall, the sealing is poor, the cold is breathable, the water vapor is formed around the window, and the phenomenon of cold condensation and condensation appears, and the water vapor formed by the condensation touches the wall, and when the long-term humidity is too large, the indoor ventilation is poor, and the temperature conditions are suitable, the humid part may cause suitable conditions for mold breeding, resulting in the phenomenon of mold and hair.

4) Water leakage in the top floor house and insufficient wall thickness are the reasons for the hair growth of the wall.

According to the different causes of mold and hair growth in the house, we treat it according to the specific situation, and completely eliminate the hair and hair mold factors caused by different reasons such as leakage, cold condensation, wall defects, and indoor moisture; After years of exploration and practical construction experience in the field of wall hair, waterproofing and thermal insulation, and using the latest anti-mildew and anti-sterilization and thermal insulation materials, combined with meticulous professional construction technology.

Make sure that after the repair, there is a complete moldy and hairy phenomenon.

2. Repair principle:

1) Thoroughly block the cold and air to eliminate the hidden dangers of the outside world.

2) The use of biological dry film technology, in the base layer of the complete sterilization and mildew removal at the same time on the surface of the cement wall base to form a sterilization, mildew, waterproof effective separation interface, and enhance the wall hydrophobicity, impermeability, antibacterial, so that the outside mold can not enter the wall, completely eliminate the mold breeding environment, so that the wall is not breeding mold.

3) For the cold gable, the insulation material with high resistance to water vapor penetration and the closed cell rate of more than 90 is used for thermal insulation treatment.

4) The use of the United States Yingsu granular insulation material to form a moisture-proof insulation and thermal insulation layer on the inner wall, block the absorption of indoor heat by the wall, put an end to the moisture and moisture generated by the alternating contact between cold and heat, and keep the wall dry.

5) After the wall is thoroughly dried, the wall is finally strengthened with anti-mildew and anti-bacteria, and the validity period of antibacterial and antibacterial activity is prolonged.

Just open the windows for ventilation and keep the walls dry, and I'm really helping you look forward to adoption

How to deal with picking you up? Our method of dealing with it should be very convenient.

Enter the area and get the decoration for free**].

How to deal with the long hair on the wall After staying for a long time, we will always find that there will be some problems in the decoration of the home, such as the house we live in has a yin and yang side. The sunny side is relatively dry because of the sun, but the house on the shady side is cold and damp. Sometimes there is even a situation of long hair on the wall, so how to deal with the long hair on the wall.

Dry with a towel and open the window to ventilate the walls of your home, if the hair grows on the walls of your home, it is not an ordinary bacteria, but a mold that can endanger human health. This type of mold generally multiplies in a large area in a cold and damp environment. Not only does it affect the overall appearance, but it can also threaten the health of the family.

Therefore, when cleaning the room, as long as you find that there is dampness on the wall, you should dry it with a towel in time. At the same time, it is necessary to open the windows to let the outside wind in and form circulation. 2.

For the spraying of professional anti-mildew liquid, you can also choose the professional anti-mildew liquid on the market, but this anti-mildew liquid is also limited to a small area. First, spray the anti-mold solution on the wall for 15 to 20 minutes to kill the mold on the wall. At this time, we will find that the color of the wall will also change, so don't wipe it off with a clean towel right away.

And the walls were restored to their original whiteness. 3.RepaintingIf a large area of hairy fungi forms on the walls of your home, you can only consider repainting the walls.

Although this method is troublesome and a waste of financial and material resources, but a large area of fungi can not be wiped clean simply by wiping the test, and repainting the wall can make the wall drier and avoid new mold growing again. Summary: The above is the relevant content of how to deal with the long hair on the wall introduced at home, hoping to help friends in need.

We all know that mold is produced in a cool and humid environment, so it is necessary to keep the home dry and ventilated, so that the walls will not grow hair.

Do the math how much it will cost you to renovate your home

Long hair on the wall is a common problem in our home, which not only has an impact on the appearance, but also easy to hide dirt and dirt, which is not conducive to cleaning. Therefore, we need to take steps to solve this problem. Here's how to deal with the long hair on the wall:

1.Clean with a mop: If it is fluffy and fluffy against the wall, you need to use a mop or rubber scraper to remove it, and then wipe it with a damp rag to solve the problem.

2.Use a vacuum cleaner: Walls that have not been cleaned for a long time may have problems with dust, slight scales, hair, etc.

Using a vacuum cleaner will solve the problem once and for all. When using a vacuum cleaner in Lushan, you need to use a soft-bristled brush head and wipe it with a paper towel before vacuuming to remove the surface dust.

3.Use a razor to remove hair: For long loose and not obvious entanglements, you can use a razor to clean up. We need to press down on the head of the shaver to reduce the cutting force, and use the right amount of force to shave the hair off the wall.

4.Switch to wall paint: If the hair problem is severe, you need to reapply it. The base layer is treated before it can be repainted. Dust the wall is removed, primer is applied, and when it dries completely, the wall is painted and the wall will be very flat.

In summary, there are many ways to treat long hair on the wall, and you can choose the corresponding method according to your own situation. In ordinary life, the wall needs to be cleaned and maintained frequently to ensure that the wall is beautiful and tidy.

Hello! This is caused by the cold of the wall, which is commonly known, but it is actually the reason why the wall insulation is not done well. You say whether the hairy wall is an exterior wall or a wall that is related to the outside world. If yes, that's basically the reason.

The wall insulation is not done well, it is a problem of building quality, in the north, a very important part of housing construction is the external wall insulation. In general, measures are taken in the north to carry out thermal insulation treatment, and the main method is to sandwich insulation materials in the wall. Block the conduction of heat by the wall.

If the wall insulation is not done well, it will lead to cold penetration, and the phenomenon of cold penetration is mold, blackening, and hair growth on the indoor wall. The reason is that the indoor air is warm and the water vapor saturation is high, and the wall is not well insulated, so the wall is cold, and the water vapor will crystallize into water droplets on the wall, and the wall will become moldy and hairy when it is wet.

To avoid the hair of the wall, the main thing is to do a good job of wall insulation. But sometimes under the current technical conditions in our country, it is impossible to deal with it very, very well, if the indoor humidity is too large, even if the wall insulation meets the requirements, there will still be moldy and hairy phenomenon.

Therefore, if there is no serious problem with wall insulation, your best way is to open more windows to ventilate and reduce the indoor water vapor content, especially in the newly renovated house, the water vapor is particularly large, and you should let the air for a period of time to remove the moisture.

Sometimes the wall may be insulated, but the window will also have the phenomenon of cold and water, and the flow to the wall will also cause mold and hair, the reason is the same.

In short, if you are one: do a good job of insulation; 2. Reduce indoor humidity; Three: more ventilation indoors.

Probably because the room is damp and not ventilated. The damp and dark environment is a breeding ground for mold growth. So, don't give mold room to grow, find the walls damp, should be dried in time.

On sunny days, multi-ventilation and ventilation are used to keep the room dry.