-
If even the red and black carbon king, which is not a carbon plate, feels that it is not well controlled, then there is nothing to control well......I think it should be your psychological effect, otherwise you should change back to CL.
-
If you have a carbon plate, you can try it if you attack it, the fabric is partial cypress, and I personally feel good, a little violent, but I don't know what standard you want.
Butterfly King 30041 feels too balanced, the specialty is strength, and Bol Spirit 30811 is a good board for the arc, the ball spins fast and the arc is good, but the lack of strength is a congenital weakness. Overall, the control of these two models is good, but it is aromatic carbon, and it is a butterfly, so it is very expensive, and it can't be done without 760.
-
It's better to choose a single cypress or an ayous solo to try it to make faster progress.
-
The function of carbon is to improve the rigidity of the racket, reduce the time of the ball on the racket, and increase the first velocity, that is, the speed of returning the ball, but its second velocity is relatively weakened. Pure wood rackets have a natural good feel, so they are the type of rackets that are chosen by skill players. It allows the ball to have a continuation time on the racket, and then the player can use this time to control the feeling in his hand, so as to improve the threat of returning the ball, which means that its first speed is not so fast compared to the amortization, so this is the most essential difference between them.
-
Since 2004, Joola has introduced the Swedish baseplate manufacturing process, and the successful technical development and market feedback have led Joola to decide to continue to develop the same series of faster carbon baseplates.
The new Joola Carbon SWE combines Joola's innovative technologies with the historic Swedish baseplate manufacturing know-how.
The result is Joola Carbon SWE, which combines almost all the advantages of a modern baseplate: the perfect combination of speed, rotation and control.
Joola Carbon Swe - The perfect experience.
-
It's very comfortable to play and it's really good.
-
It's easy to hit and easy to hit.
I hope you will adopt it.
-
Looking at the side of the bottom plate, if there is a thin black line, it is a carbon bottom plate, if not, it is a pure wood bottom plate.
-
Pure wood boards feel good and easy to control. The carbon plate is fast and difficult to control. It also depends on your style of play. If speed is the main thing, consider using carbon plates. If rotation is the mainstay, consider using pure wood planks.
-
There is a certain level of technology can consider carbon, ** expensive, but the speed of the bullet is much higher, I feel that the board is very hard, novices can not control it, see you should be a very high level of table tennis enthusiasts, you can buy a board with carbon to try it, and highly recommend the provincial team dedicated to Hurricane 3 (provincial madness), with carbon base plate invincible. Hehe, I have also been playing table tennis for more than ten years, this is what I know, and I hope it can help you.
-
Hello, I think it comes down to personal preference. In the professional field, in the era of carbon, pure wood, and new materials, in order to increase ball speed, the utilization rate of carbon bottom plate has a tendency to increase. Usually pure wood feels good, including 5 clips of pure wood, strong deformation, strong bottom strength, suitable for attacking arc balls, but the once brilliant soft 5 clips are too procrastinating, and gradually not suitable for the times, now commonly used for hard 5 clips.
The 7-clamp pure wood board body is stiff, suitable for borrowing force and pushing. The carbon base plate is more powerful, and the stiffness is above the 7 clamps, but it lacks toughness. There are not many carbon bottoms with a good reputation in the middle and low-end bottom plates, so try to choose them from pure wood.
High-end bottom plate, pure wood or carbon depends on their own technical situation to choose.
-
Each has its own advantages, and it is chosen according to the individual's feel and playing habits.
Usually the pure wood bottom plate has a good feel, good ball holding, strong ability to make arc circles, the pure wooden board of five clips is generally suitable for arc fast play, and the pure wood board of seven clips is suitable for fast arc play, and at the same time, because of the clear feel and relatively strong control, it is recommended for beginners.
The carbon base plate is fast, the ball is fast, and the body is tough at the same time, easy to borrow, and the power is greater in the middle and near Taiwan, which is generally suitable for fast arc play, and the strength and speed are stronger than the pure wood bottom plate, but the control is not as good as the pure wood, and the carbon base plate can be considered with a certain level of technology.
-
Good carbon bottom. The woody bottom is perishable.
Carbon base has long-term antioxidant resistance. Not perishable. The waterproof effect is also good
-
What is the difference between the carbon of the bottom plate of a table tennis racket and the whole wood.
The carbon bottom plate feels thick and stable, and there is little shock.
The pure wood base plate is relatively lightweight, and has high requirements for its own force.
Personally, I think that the pure wood bottom plate is very useful for fixing the ball pulling action. The carbon base plate is more violent and lethal, but it is not as stable as pure wood.
You know why you add carbon to your racket.
The addition of carbon is not as much as you want, the thickness ratio is strictly limited, as long as the carbon addition is to make the racket more stable and improve the rebound characteristics of the racket.
It can't be said in general terms that it is for hardening or more stability, because there are many kinds of so-called carbon, and there are also relatively soft carbon bottom plates. It is not possible to generalize. The main thing is to change the rebound characteristics, this is our understanding.
If you're a newbie.
Carbon base plate is optional. When the basic skills are about the same, you can change to pure wood
-
Don't think about it.
Changed it directly. Carbon geothermal film with flooring is the best, because my family is using it now.
But don't mistake geothermal membranes for underfloor heating.
-
Hello everyone, I have been practicing professional table tennis for two years. Recently, I was going to change the bottom plate, and I saw on the Internet that Stika CL and Stika CE were quite suitable for me. But what should I choose if I want a baseplate with good control and speed? I'm really struggling, solving.
-
Unless your fundamentals are particularly good, the carbon plate gives the impression that you can't control it, and the ball you hit is not what you want. These sets of glue of yours are all good, let's change the board.
-
Light Butterfly King, such a good baseboard, the forehand must be used to save the madness, and the backhand is rich on the bus, otherwise 729 Focus 3 is the best choice.
-
The king of the bottom plate, the king of the hurricane, the hurricane Ning, and the hurricane Hao. Forehand and backhand with one side of the province of madness, one side of the butterfly bus, buy online, about 500.
-
Viscaria Light, commonly known as the Light Butterfly King, has two characteristics: easy to control and lightweight. The ease of use of the forehand, and the poor control of the backhand, the problem is in the set of glue.
Clark SP, judging from the market reaction, is said to be on the hard side, more suitable for forehand use, and not easy to control on the backhand.
CJ8000 is an entry-level rubber set, and it does not match this base plate. The 729 2 is an entry-level positive glove glue with little control and no good. The 792 08 is a forehand strong attack type rubber, and it is not good to put it on the backhand.
Focus 3 is astringent, with general rotation and control, and it is difficult to twist and pull.
The advantage of UFO is that it uses a Japanese sponge, and the control is excellent, so you can try it.
Red V is mostly used on the forehand, placed on the backhand and more offensive, with a recommended level lower than UFO and higher than the focus three.
-
This board belongs to the rigid board (the old and new versions are the same)....3 wood 2 carbon structure, and the surface material is cypress. Feel ligament and hard. This board is a good fast attack.
But why buy carbon plates for pulling balls. Besides, it is a carbon plate of the cypress surface. The deformation is very small, so it's basically difficult to pull out a good arc (and to be honest, don't mind)...I think the landlord prefers to push or pay attention to the bottom strength of the bottom plate, in fact, there are a lot of material boards that are more suitable for pulling the ball (Butterfly Kupal, Yasaka's horse soft carbon, STIGA's red and black...).are better than ordinary carbon).
Now that the board has been matched, the current method can only be balanced from the rubber covering. The ball is out of the bottom plate too fast It is recommended to put a rubber sponge with soft spots, and pay attention to the stickiness (the greater the stickiness, the easier it is to eat the ball)....For direct shooting, you can consider the 39-degree Tianji 3, or even the G666 with better viscosity (because the elasticity of the sports sponge is relatively small)....There will be some improvement. It is highly recommended to clean the rubber after each game and then apply the protective film to maintain the stickiness...
A high-resilience sponge like the 729-08 is not recommended, and will only make the ball faster and more difficult to control. I hope my personal opinion will be helpful to you.
-
This board is a rigid bottom plate, and the above feeling is very normal for the first use.
If you want to make good use of this board, on the premise of not talking about technology, it is to optimize and complement the rubber and the bottom plate to the greatest extent.
I've used this board myself, and it's a good board. It is recommended that the landlord match 39 of the hurricane three, and brush the rubber sponge with glue before playing is to fill the glue), so that the feeling of eating the ball including the feel will be much better. In addition, if the landlord is a master, he can play 40 degrees of madness, and the strength is more sufficient.
There are many amateur middle-aged to elderly people who use this board, and they are used to playing very well.
729-08 45 degrees can be tried, but I still recommend trying the 39 crazy three, after all, the butterfly's carbon board with domestic rubber itself is not very good, but because of the characteristics of the Chinese straight board players who are used to the forehand adhesive rubber, try the 39 crazy three glue.
Hope you can find the feeling.
39 degrees or 40 degrees can be poured with glue, 729 can be used in the forehand, and the good rubber is 729-08, 45 degrees, you can try it.
-
If you want to use this board to pull out a ball with a large rotation, you must take the way of hitting first and then rubbing, otherwise, the speed of the ball is too fast, which will lead to incomplete friction and eat the sponge first.
-
There's no way, this is the carbon bottom plate will be like this, otherwise the speed advantage will not be reflected, in this case, you can try a softer rubber or increase your strength to wrap the ball and then rub.
-
Can Primorac pull the arc?
Problems with your technology.
The response is slow, the technology is not mastered well, and it is indeed a waste to use such a bullish baseplate.
-
The old butterfly carbon is a little hard, and it is estimated that your Hurricane 3 hardness is too great, so choose a soft glue.
Let's change the latest mystery mark on the forehand, and the softest 38 degrees. The backhand for Yasaka zap spin is definitely soft enough.
-
Primoratsp Carbon Bottom Cricket Racket: Offensive.
Speed: Super-fast.
Feeling of batting: Hard.
Weight: 88g
Number of layers: 5 layers.
Material: 3 layers of wood + 2 layers of tamca carbon.
Face size: 157 150mm
Handle size: 82 24mm
Thickness: 3 layers of wood + 2 layers of carbon (surface cypress), known as the classic racket. Well-designed, the offensive power is huge, the defense can attenuate the forward momentum, it is very stable, the offensive and defensive transitions, do whatever you want, and the offensive baseboard.
Primorac carbon plate, commonly known as universal carbon, is a racket that plays a very important role in the butterfly atlas, known as a classic racket.
3 layers of planks + 2 layers of carbon (surface cypress), forehand attack is a strong point without losing the close defense, and holding each other steadily is a strength.
Well-designed, the offense is hugely powerful. The forward momentum is very solid, the offense and defense are switched, and the offensive baseboard is as you like.
1. Forehand butterfly minibus, 39 degrees of backhand soaring 3.
2. Forehand butterfly bus soft 05490, backhand red double happiness g666
-
In fact, if you don't mind the day straight, it's good to put in a piece of the Rio 8603 day straight, the forehand is strong, the arc is stable, a bit similar to the feel of a single cypress, the ball is very sprayy, even if you can eat the ball, you can also bounce the ball. The market physical store is 180, and the online store can be 100. The rubber is recommended with a soft spot Clark SP or a Hurricane 3 below 39 degrees
-
Within 200 are all domestic, nothing good. The gap between the domestic base plate and the imported one is still quite large, and the technical materials are not good. Feel good, choose Stica pure wood. About 300 is good.
-
Choose one of the science and technology carbon, this kind of board is not pure carbon, and it retains most of the feel of pure wood, but it is not as fast as pure carbon.
-
Yes, STIGA CC5 is the kind you want, licensed about 1200 yuan.
-
K4 upgrade: v14 (galaxy), give it a try.
-
21730?It's not 21370, right?
21370 is a butterfly cowfret, which is an aromatic carbon baseplate, which belongs to the aromatic carbon class offensive baseplate, the famous butterfly Hercules.
21730, is topspin, is a pure wood five-plywood, belongs to the arc ring class of the full board, if it is cs, that is, the straight board, then, suitable for the straight board horizontal arc ring board. It's not a carbon baseplate.
-
Table tennis teaching: What are the similarities and differences between carbon base plate and aromatic carbon bottom plate? The structure and style of play are different!
-
The base plate is made according to the style of play. Each type of play corresponds to a baseplate. Usually, the five-layer pure wood base plate is used for the arc circle play or chipping ball play, and the seven-layer pure wood bottom plate or carbon base plate is used for the fast arc play and the near-stage fast attack play.
The characteristics of the all-carbon badminton racket are as follows: >>>More
Table tennis rackets. What is the difference between the carbon of the bottom plate and the whole wood? >>>More
1. Mix alcohol and toothpaste and apply it to the ink, and scrub vigorously to remove the ink. 2. Soak the clothes, sprinkle salt on the inked parts, and rinse them after 30 minutes to remove the ink. 3. Pour in water84 disinfectantSoak the garment and let it sit for 30 minutes, then wash it with soapy water to remove the ink. >>>More
1 New ink stains or clothing that has not been stained for a long time can be soaked in hot milk or kefir, and it is easier to remove. (3) The ink stains on the white clothing can also be moistened with tap water first, and then used hydrogen peroxide and juice with a slightly hot concentration of 3, etc., which can be washed off with alcohol. Remove blood stains When clothes are stained with blood, if you rinse them with water immediately, you can 2 Ink stains on general clothing You can choose to use 1 part of oxalic acid and 10 parts of water to make a mixed solution, heat it, and carefully scrub it with a cotton ball dipped in a hot state. >>>More
I just know to look at the grade difference.
Carbon structural steel: used in the manufacture of engineering structures (such as bridges, ships, buildings, high-pressure vessels, etc.) and mechanical parts (such as gears, shafts, screws, nuts, connecting rods, etc.), this kind of steel is generally low-carbon (carbon content 0 medium carbon (carbon content steel. >>>More