Do I have to reset the LED receiving card when I remove it and put it back on?

There is no need to reset, after reinstalling the LED receiving card, the configuration inside is the same as before, and there is no need to re-set it.

Your receiving card is removed and reinstalled, and it needs to be set up again after you go back, and the order of setting cannot be wrong, otherwise it cannot be used again.

If you remove the remote receiving card, you will need to reset it if you want to replace it.

LED his reception, his dismantling card we down, and then put it back to reset, and it will still bring us all better use and help.

Do I need to reset the LED receiving card when I remove it and put it back on? Embodying, this one must be re-set when it is removed and put it back up.

And the remote receiving card is removed and then put back um this can be set up again, but you need that um, deleting the memory is to use all the things he used before. Delete them all.

AD, do you want to redesign the receiving card after removing it and then putting it back on? Generally, many are remote control types, and this receiving card may need to be redesigned.

I don't know this spell, and the first receiving card is folded down and then put back in and cleared again. Set? Well, this one is going to be seen by a professional, how is it done? Just make sense.

The LED receiving card is removed and then reinstalled, and it needs to be re-set, so that if it is not re-set, the original thing will not appear.

It's best to set it up in the original way, and it's best to make it original.

Do you have to set it up again once you disassemble it and put it back on? This should be needed, take a look at some news on the Internet, and learn more about some uses of this led light.

The LED receiving card is removed and then installed, and it needs to be set up again.

Do I need to reset the LED receiving card when I remove it and put it back on? This one has to be set up again, and the previous one can't be used.

Yes, you have to set it up again.

The receiving card is loaded inside the LED display. The receiving card is connected with the display screen with a cable, and the corresponding type of interface connection on the receiving card is selected according to the interface type of the unit board.

LED display receiving card control scheme, LED display control principle for the computer DVI graphics card to send the card signal, the sending card will transmit the data to the receiving card, the receiving card will directly transmit the data to the LED display, it is worth noting that due to the large area of the LED display, the data that each receiving card can process is limited.

The ideal number of points for a single receiving card is 192 192 for the conventional refresh rate, due to the small spacing indoors, such as the refresh rate of 32 scans, the width of a single receiving card can not exceed 128 pixels, otherwise the LED display will be very strobeling, the height can be brought to 256 No problem, the conventional outdoor series LED display is usually 4 scans or 8 scans, according to 256 256 to carry without any problems.