Ink cartridge vs. ink problem Please come in with a friend who understands

It doesn't have to be the same brand, the ink filling has a great impact on the ink cartridge, generally poured three times, it can no longer be used, it is recommended to change the ink cartridge to a new one.

Our company's HP is like this, the ink is not more than twice, but the consumables of HP are more expensive.

There is also the general black cartridge is fine, and it is difficult to have the effect of the original cartridge after the color ink is filled.

If it's something that can drip ink! Then you can buy an ink to add ah!

Instructions for use are available on the ink tank! Just follow his instructions!

It's best to find a special person to teach you!

Some are encapsulated cartridges! That kind just can't add up!

The ink can be refilled, and the ink cartridge can be changed when it is exposed or the ink is not good. It's best to use ink from the same house.

The printer refueling method is as follows:1. Pry the cartridge open with an awl first, and then pad a piece of paper under the cartridge.

<>3. There is a piece of adhesive tape on the top of each ink cartridge, and there will be a hole for injecting ink under the general adhesive tape. As long as you tear it lightly, you can see the smile.

4. Use a syringe.

After sucking the ink in, insert it into the small hole of the cartridge and place the cartridge diagonally so that the ink can flow into the cartridge.

5. The purchased ink generally has a more convenient pointed mouth for adding ink, and be careful to add ink once squeezed into too much. Because bubbles will be generated. In this way, you can add it gradually.

After adding ink, it is recommended to use tape to let the elevator carry and then seal the hole. Wait for the printer to restart, you can, generally finish adding ink, and print again after two hours.

Original ink cartridges or filled ink cartridges, the ink is too full, and it is easy to drip ink. The ink cartridge in the supply is full of ink, and it has no effect on printing.

Original cartridges or filled cartridges, a small amount of air is a must. When the printer uses ink, the air on the ink cartridge generates negative pressure, which cancels the ink its own gravity and achieves the balance of the ink, so that the ink will not drip onto the paper that needs to be printed under the action of its own gravity. So, adding ink to the cartridge, usually 3 4 to 4 5 of the cartridge capacity will do.

The inner ink cartridge is only used to temporarily store ink. Even the ink supplied to the ink tank of the external cartridge should not be too full. When the printer uses ink, the air in the ink chamber of the external ink cartridge becomes thinner to form negative pressure, so as to achieve the purpose of ink balance.

I've also encountered situations where I can't print after ink, and even if I can say yes in this process, it's very vague, and I don't know if this is the case with LZ.

When adding ink, there are 5 holes on the ink cartridge, and I usually inject about 2ml per hole, so I don't need to add it too fast, and don't let the air come into contact with the ink inside.

There is also the ink cartridge needs to stand for a period of time after adding ink, about a day or so, and it can basically be printed, if it doesn't work, it is basically a problem with the cartridge or the cartridge is incompatible.

If there is too much ink in the ink cartridge, it will leak, and the machine will burn out the motherboard or something. I also have this experience, even after the repair of the machine has been problematic, the cost of repair is more expensive than this printer! Therefore, if it really comes to a serious point, then it is recommended that LZ change the channel, otherwise the cost of repair alone is not worth it!

Now I'm using a continuous supply of ink cartridges, the effect is not bad, there is no trouble with adding ink and it is affordable, if you can, I recommend LZ to try it!

If the pressure is too great, the nozzle is easy to overflow, don't add too much, just 80% of the position.

First of all, you need to solve the problem of air entering the printer ink tube as soon as possible, otherwise it may affect the normal operation of the printer.

Here are some possible workarounds:

Try cleaning with a cartridge cleaning program or cleaning tool, which will help expel air and restore the proper functioning of the ink tube. Dig carefully.

Locate the start and end points of the ink hose in the printer and check the tubing for any clogged or damaged parts. If so, try removing or replacing these parts.

If the starting point of the printer's ink tube is the ink cartridge, you can try to add ink to the ink cartridge and clean the ink cartridge and ink tube several times before the ink fills the ink tube.

If the above methods do not work, it is recommended to contact the printer manufacturer or after-sales service center for inspection and repair. If your printer is still under warranty, it may be available for free repair or replacement.

It is important to note that the problem of the printer's ink tube should not be regarded as a trivial matter, because if it is not solved in time, it can lead to serious problems for more filial piety.

If you are experiencing problems with the cartridge, you can try the following solutions:1Check that the cartridge is properly installed:

Make sure that the cartridge is properly installed in the printer and that it is not loose or reverse-inserted. 2.Clean the cartridge and printhead

If the print quality is not good, you can try cleaning the cartridge and print head. For specific methods, please refer to the printer manual. 3.

Replace the cartridge: If the cartridge has been used up or has been damaged, you need to replace it with a new one. Make sure to use a cartridge that matches your printer model.

4.Restart the printer: Sometimes restarting the printer can also resolve some issues.

5.Contact after-sales service: If none of the above methods can solve the problem, it is recommended to contact after-sales service for help.