How to make the wireless turn on but there is no network. TENDA routers.

1.Do wireless access control, and only allow your own devices to connect to the wireless signal to surf the Internet.

Open a browser to log in, click Advanced Settings - Wireless Settings - Wireless Access Control - MAC Address Filtering - Select "Allow Only" to add the MAC address of the device you want to access the Internet.

2.Disable the broadcast SSID, hide the routed wireless signal name, and all wireless devices need to manually add the SSID to access the Internet.

In the router settings interface, click "Wireless Settings" - Wireless Basic Settings - Broadcast SSID, turn it off, and click OK.

Home Network Environment Cabling:

1. There is a telecom cat: the telecom cat --- router WAN port; The LAN port of the router --- the computer;

2. No telecom cat: network cable --- router WAN port; The LAN port of the router --- the computer;

Set up router dialing:

Automatic acquisition of computer IP and DNS settings;

1. Enter the router. In the [Setup Wizard], select [PPOE Dialing] (some are ADSL Dialing), enter your Internet username and password as prompted, and save;

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPOE Dialing] in the three options of [Connection]. The next is to select [Auto Connect], Save, and Exit;

3. If you want to use wireless wifi, your router must have a wireless routing function, in the settings, turn on the wireless routing function, here, the wireless signal signal is changed to one of them. The strongest anti-interference. You can also set a password for your Wi-Fi connection.

Some routers can't enter the settings page after they are set up, so you do this:

Plug in the wireless router, do not connect the cat or home network cable first, connect the computer to any LAN port of the wireless router, enter the gateway address in the browser (there is a label on the back of the router), and enter the settings page.

If you still can't get in, reset the wireless router (factory reset) and enter, but then you will have to set up the wireless router again.

By default, DHCP automatically assigns addresses to routers, so the terminal selects Auto-Assign Addresses.

There are two possibilities: 1, the router channel is congested, unplug the power supply for 2 minutes and turn on the power (some models need to press the reset button with a small pin) 2, your router is broken, buy a new one.

Possible reasons and solutions for mobile phones not connecting to the wifi network:

1.First of all, check whether the wireless router is working normally, you can use other mobile phones or digital products to connect to the wifi signal, if you can connect and surf the Internet normally, then generally this router can work normally.

2.The phone is turned on to sleep and the network is turned off.

Check whether the phone has the option to turn off the network in the dormant state, the phone will be disconnected after a period of time or cannot receive the background chat software, the possible reason is that the phone is turned on the function of turning off the network by mistake.

3.If you use the router for a long time, the router may freeze its death. Just restart your wireless router.

4.The type of certification is not suitable. Try to change the authentication type of the router, it is better to choose the secure "WPA2-PSK" type mode, and the following encryption algorithm is better to choose "AES".

5.The network settings of the mobile phone or router are abnormal. Consider restoring your router factory settings and cellular network settings.

Please confirm whether your router is set up correctly, and for the specific setting method of the router, please click on our official website to view:

2. There is also a possibility that your Internet access method is Web authentication, which requires the computer to pass the Web authentication before other WiFi can access the Internet normally!

Click the Agree or Whatever button on this page to enter.

Here's how to set up a wireless router:

After the setting is successful, the mobile phone goes online, enter the wireless password and it's OK.