-
Anonymous users2024-02-08Your router is set up wrong, it must be your computer dial-up, so squeeze out the router, only need the router to dial, the computer is not dialing, check your settings: connect the computer network card with the router LAN port with a network cable, turn on the router power;
Enter the default username: admin and the default password: admin; Click OK.
Click Setup Wizard in the left rail, click Next;
Click on ADSL Virtual Dialing (PPPoE) and click Next;
Enter the broadband, password, and click Next;
Click Done. Many friends think that the dial-up connection is over after setting up, but in fact, there is still one point that is not completed. Because the following settings are not completed, many friends encounter 691 errors in dialing, or can connect to the network, but it will be dropped after a short time.
Let's continue with the setup:
Click the MAC address clone menu in the network parameters menu on the left sidebar, click Clone MAC address in the interface that appears, and click Save. At this point, the router will prompt you to restart the router, click OK to restart the router.
After the router restarts, close the Internet Explorer.
Connect the WAN port of the router with an incoming network cable, and then connect the computer to the LAN port of the router with a network cable to start surfing the Internet.
Note: "Some users have multiple computers at home, but don't know the MAC address of which computer to clone. You only need to directly connect the cat (or home network cable) to the computer with a network cable, and then dial on the computer, which computer can dial up the Internet, and clone the MAC address of which computer.
These processes are done absolutely and can be used.
-
Anonymous users2024-02-07I don't know if I should call you brother or beauty. Is your desktop connected to the LAN port of the router with a network cable or is it wired directly from the Moden to the desktop?
1. If it is connected to the LAN port of the router, then you don't need to dial up, and you can go directly to the Internet. At this time, the dial is not available.
2. If you are directly connected to the moden, then your computer will not be able to dial after your router is connected.
Therefore, the easiest way for you to do this is to connect your desktop's network cable directly to the LAN port of the router, and just go online without dialing.
-
Anonymous users2024-02-06You don't need to dial up with a router.
-
Anonymous users2024-02-05Set up the network at the beginning of the network, there is a dial-up connection, select No.
There are two situations, first: your computer is poisoned by ARP, as soon as you start the Internet virus, trick other computers into sending data packets to your machine, and your computer throws away these packets, their computer will not be able to get on, use 360 to kill the virus. >>>More
There are some reasons why routers are good and bad:
1. Hardware problems with the router itself. When encountering an unstable router signal, the first thing to consider is the router itself. For example, there is poor heat dissipation of the router in summer, and the internal hardware of the router is very hot. >>>More
VPN: The Access 101 permit IP defines security federation and key exchange policies. >>>More
There could be two reasons for this:
1.If there is a problem with your router itself, you can go to the place where you bought the router to check it. >>>More
I don't know what you mean by the network cable is the landlord's? It's really hard for you. >>>More