How to use the treadmill Why does it not respond when I press start?

It may be that the motor is damp, or there may be a problem with the button, it is recommended to put the treadmill in a ventilated place for a few days, if it still doesn't work, please call the manufacturer, let them come to help check.

If the treadmill does not respond at the start, you must first reduce some of your power is turned on, if there is no response, it should be your switch has a problem and needs to be repaired.

The treadmill presses the start button, and the reasons for the failure to respond are as follows.

Check if there is any abnormality in the power supply voltage of the treadmill?

Check whether the start button of the treadmill is working properly and whether the line is on and off properly.

If the treadmill does not respond at the beginning, check whether the treadmill is plugged in, and if it does not respond, go to repair.

If pressing start doesn't work, see if you have some paused items set up, or if it's not plugged in, etc. Normally, if there is no timer set, then press start.

Is this not plugged in, no switch, after all, if you don't plug in the power, it will definitely not respond, normal.

So check it out, check it out.

The treadmill starts with a start button, and then there should be a reaction process, and then it starts automatically.

In this case, you can consult the company.

One. The fuse is damaged.

What is the reason why the treadmill does not start.

If the load is too heavy or runs for a long time, it will speed up the damage of the treadmill, increase the heat dissipation capacity of the motor, and still can't start after cooling, it may be that the fuse is blown out, it is recommended to use it as required, do not exceed the maximum load capacity of the treadmill, the maximum load capacity is generally 95kg.

Two. The motherboard is damaged.

What is the reason why the treadmill does not start.

If there is no fault flashing at the beginning of E** and the sound of Didi on the display, this situation is generally that the motherboard is burned out, and the treadmill cannot be started at this time, which requires a professional to repair it.

Three. The belt slipped.

What is the reason why the treadmill does not start.

Slipping belts can also cause problems on the treadmill, as long as the belt of the motor is connected to the belt of the roller.

Reason: Generally, there is a problem with the internal wiring, and the wiring needs to be checked, so it is recommended to contact the after-sales service to solve it. Common use problems of treadmills:

If the treadmill buttons are not working, it may be that the keys are aging or the key circuit board is becoming loose.

The treadmill LCD screen is not displayed, it may be that the internal circuit board is faulty.

The feeling of unsmoothness when running may be caused by the loosening of the running belt, which can be adjusted according to the instructions of the manual, and the treadmill needs regular maintenance, such as adding lubricating oil.

The failure of the treadmill to accelerate may be due to the poor contact of the cable joints, or it may be that there is a problem with the motor control board, and you need to contact the after-sales service to solve it.

Before using the treadmill, you should do a good warm-up exercise, pay attention to adjust the speed, and generally exercise for 40 minutes. Data Expansion: Treadmill is a common fitness equipment in homes and gyms, and it is the simplest type of home fitness equipment today.

Hello dear I am honored to have your question, if the load is too heavy or running for a long time, it will speed up the damage of the treadmill, increase the heat dissipation capacity of the motor, and so on after cooling or can not start, it may be that the fuse is blown out, it is recommended to use it as required, do not exceed the maximum load capacity of the treadmill, generally the maximum load capacity is 95kg. Two. What is the reason why the treadmill is damaged and does not start If there is no fault flashing with e on the display screen** and the sound of Didi, this situation is generally that the motherboard is burned out, and the treadmill cannot be started at this time, so it is necessary to find a professional for repair.

Three. What is the reason why the treadmill does not start, the belt slipping will also cause problems in the treadmill, as long as the belt of the motor is connected with the belt of the roller, I hope it can help you.

Possible reasons why the treadmill won't start:

The power supply is not working; fuse blowing;

The switch of the electric treadmill is broken;

Possible causes: 1. The power supply is not working; 2. The fuse is blown; 3. The switch of the electric treadmill is broken; 4. For other problems, it is recommended to contact professionals for maintenance.

Solution: 1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.

Check whether the power supply is electric, whether the plug is secure, whether the treadmill fuse is burned, and then the machine is faulty.

There are some reasons for the poor contact of the line, power failure, aging and disconnection of the line, key failure, mechanical failure and other influences that cause the treadmill to not start.

Check the power strip, if it is connected to the power supply or it still does not work, it is recommended to read the instruction manual carefully, and then you can call customer service. I hope mine can help you, and I hope you have a strong body soon, hopefully.

The treadmill can't start, you have to check whether the power supply is three-one? Well, starting the second is whether your treadmill is broken, and the third is whether the treadmill is broken? Well, improper operation? The fourth question is whether the treadmill may have broken down?

Maybe something went wrong, a part was broken, maybe the wire was broken or degummed, let the repairman check it.

If the treadmill can't start, the first thing is to see if it's plugged in, the second is to turn on the switch, and to increase the speed, etc., you can see for yourself.

If the treadmill does not start, it may be that it is not connected to the power or it is broken.

It may be that the contact is not good.

The treadmill can't start, check if the power supply is plugged in?

Check whether the power supply and the bottom switch of the treadmill safety switch are broken, and it will be warranted.

Pressing the start button and not responding may be the following problems, check them one by one:

1. The power supply is not plugged in;

2. The power supply is plugged in, but the power switch of Qingpi is not turned on;

3. The emergency stop safety buckle is not placed correctly;

4. The motor is faulty;

5. The upper or lower control board of the control system is faulty;

If there is no problem with the inspection of 1 to 3 of the fruit, but the machine still cannot be opened, then you need to contact professional and technical personnel for maintenance.

Summary. The treadmill press start is not responding.

The treadmill press start is not responding.

Is there electricity. 1. The power supply is not plugged in;

2. The power supply is plugged in, but the power switch is not turned on;

3. The emergency stop safety buckle is not placed correctly;

4. The motor is faulty;

5. The upper or lower control board of the control system is faulty;

What brand of treadmill.

If the motor is broken, you can only find after-sales.

The treadmill does not respond when it is pressed, which may be a power supply problem.

After the treadmill is started, it is likely that there is a problem with the line, and the line will be lost during long-term use, and the line will be lost or interrupted. There is a motor inside the treadmill, and the motor drives the treadmill to run. If it can be started normally, it is necessary to consider whether the motor is damaged, and it is recommended to find a professional maintenance personnel for inspection.

After the treadmill is used for a long time, the daily inspection and cleaning will be carried out, and the aging and dust accumulation of the carbon brush inside will affect the operation.

Sports equipment

Treadmill is a common fitness equipment in homes and gyms, and it is the simplest kind of fitness equipment in today's home. In 1965, the Nordic Finland gave birth to the world's first home treadmill, which was modified according to the principle of speed belts. The electric treadmill is a relatively high-end equipment in the gym, which drives the running belt through the motor to make people passively run or sail at different speeds.

The electric treadmill is a high-end equipment in gyms and homes, which uses the motor to drive the running belt to make people run or walk passively at different speeds. Due to the passive formation of running and walking, from the appearance of the action, it is almost the same as running or walking on the ground ordinary, but from the perspective of human strength, running on an electric treadmill and walking without a kicking and stretching action than ordinary running and walking.

What is the reason why the treadmill does not start? Pressing the treadmill on the display to start does not respond.

Kiss The reason why the treadmill does not start is that the driving board is broken, you can remove the driving board and clean the internal red wire, and then reinstall it. 2. Please use the handrails next to the pins and limbs before starting, put your feet on the side strips on both sides of the treadmill before starting, set it in the low-speed position before stepping on the treadmill, and then slowly increase the speed. 3. Take off the safety pull-off device at any time when using, and the motor can be stopped.

At this time, the smart controller will make a sound to remind you to pay attention, and after pressing the zero button, all the displayed values will automatically reset to zero.

Summary. What is the reason why the treadmill does not start? Press the treadmill on the display screen to start no response, kiss hello, treadmill professional maintenance and after-sales service, after connecting the treadmill to the power supply, see if the display is complete and normal, if the normal press the start button, if the treadmill will not work, it will generally appear on the display screen**, this situation is that the motherboard below is burned out, resulting in the treadmill does not work in a state that does not rotate, is your safety lock not put on it.

What is the reason why the treadmill does not start? Pressing the treadmill on the display to start does not respond.

What is the reason why the treadmill does not start? Press the treadmill on the display screen to start no response, kiss hello, treadmill professional maintenance after-sales service, after the treadmill is connected to the power supply, see if the display is not complete and normal, if the normal press the start button to swim no, if the treadmill will not work will generally appear on the display screen**, this situation is that the motherboard below is burned out caused the treadmill not to work in a state that does not rotate, is your safety lock not put on it.

Hello dear, there are usually 4 main reasons why the treadmill cannot be started: 1. The electronic watch movement is faulty; 2. Controller failure; 3. Motor failure; 4. The green line of the communication connection line is broken. When we encounter this kind of fault problem again, we can check it one by one according to these four points.

Tankey electronic watch movement failure need to check whether the dial button is stuck, if the key is stuck, then adjust the distance between the key and the contact surface, the key oxidation needs to replace the touch button. If there is no fault in the button, you can continue to check that the crystal oscillator of the watch movement does not oscillate and cannot work, and replace the crystal oscillator or electronic watch movement. Controller fault may be the open circuit or open circuit of the power tube of the portable attitude controller, use the multimeter Q block to detect the forward and reverse values of the power tube, the normal range is 600 to 8009, if the open circuit or open circuit of the power tube is detected, it needs to be replaced, and then check whether the controller voltage regulator tube has normal voltage output, if the output voltage of the voltage regulator tube is detected is abnormal, the voltage regulator tube can be replaced.

If the argument is not the above problem, the controller will be replaced.

Hello dear, the treadmill pressing the start button does not respond may be the following problems, check them one by one: 1. The power supply is not plugged in; 2. The power supply is plugged in, but the power supply is not turned on; 3. The emergency stop smart stop safety buckle is not placed correctly; 4. The motor is faulty; 5. The upper or lower control board of the control system is faulty; If 1 to 3 inspections are fine, but the machine still can't be opened, then you need to contact professional technicians for maintenance.

Summary. 1.If the driver board is broken, you can remove the driver board, clean the red wire inside, and reinstall it before restarting.

2.Please use the handrails to get on and off the treadmill, put your feet on the side strips on both sides of the treadmill before starting, set it in the low-speed position before stepping on the treadmill, and then slowly increase the speed, when leaving the treadmill, adjust the speed to the lowest first, so as not to lose balance and cause injury. 3.

The safety pull-off device can be removed at any time during use to stop the motor.

What is the reason why the treadmill does not start? Pressing the treadmill on the display to start does not respond.

1.If the driver board is broken, you can remove the driver board, clean the red wire inside, and reinstall it before restarting. 2.

Please use the handrails to get on and off the treadmill, put your feet on the edges on both sides of the treadmill before starting, set it in the low-speed position before stepping on the treadmill, and then slowly increase the speed, when leaving the treadmill, adjust the speed to the lowest first, so as not to lose balance and cause injury. 3.The safety pull-off device can be removed at any time when Zhihu is in use, and the dead ear can stop the motor.

Is the display broken?

If there is this reason, or there is a problem with the line inside, it is recommended to call the after-sales service and ask a professional to repair it.