What is the quality of Yijian treadmill? What should I do if the Yijian treadmill is broken

Yijian treadmill is inexpensive and of good quality.

Yijian's treadmill, now the proportion of commercial models is very small, most of them are home models, the price range is between 1000-3000 (a slight breakthrough), the main direction of the future is also the "home gym" series, so cost performance is the most important point. Taking the intelligent treadmill of Yijian Elf as an example, the peak horsepower of the motor of this treadmill is 3HP, and the continuous output is 1HP, under this output horsepower, if the weight is about 70kg, then running at normal speed is OK. But if you weigh too much, more than 90kg, then this treadmill is not suitable for running, and you can only jog or walk.

Don't buy a Yijian treadmill!

I bought one, it was bought in **Tmall store, 4500 yuan, and it was used for less than 5 years, and the front component was broken (a knowledgeable friend will know that it is a defect in the component itself by looking at the ** below). After checking on Tmall, the original store was closed. Call 400**, say find Tmall "Yijian Sports***", find after-sales, send **, fill in the list, wait for two days, tell me that your product is discontinued, not produced, no matter.

The 6-year warranty on the motor is also deceptive.

Only then did I understand why I closed the previous store and opened another store, because the after-sales service was too poor, and I was afraid that the buyer would comment and complain.

There are a lot of treadmills on the market now, Yijian's things focus on quality and cost performance, so this is a brand that pursues practicality, if you are a down-to-earth person, it should be consistent with the character, and the quality still depends on what model you use, whether the weight has exceeded its upper limit, and depreciation will be accelerated if it is exceeded.

If the ejian running machine has a fault, it can be checked and repaired by following the steps below:

Step 1: Check the power supply and plug.

First of all, check that the treadmill's power plug is plugged in tightly and effectively, whether the plug is worn, and whether the power socket is working properly. If the plug is worn or the power outlet is defective, replace the plug or replace the power outlet to fix the problem.

Step 2: Check the motor.

Next, check if the motor is working, which can be judged by listening to the sound. Most treadmills have a separate switch on the motor, and if the switch is off, the switch can be pressed to start the motor.

Step 3: Check the circuit panel.

If the motor is working properly but the treadmill still won't start, then the fault may be on the circuit panel. In this case, it is necessary to check whether the circuit panel is well connected and ensure that the panel is not damaged or short-circuited.

Step 4: Replace parts or seek professional help.

If the above steps do not solve the problem, you may need to replace some parts of the treadmill or contact the Ejian after-sales service center for professional repair help.

In short, if the e-jian running machine encounters any fault, do not disassemble or repair it by yourself to avoid causing more damage. It is best to seek professional technical support to ensure the safety and reliability of the treadmill.

What are the common faults and solutions of Yijian treadmill? Hello dear, one, the system does not work aIf you are not connected to the power supply or the power supply is not turned on, connect the power supply and turn the power switch on to the "on" position

The safety lock is not in place, put the safety lock in the correct position cThe circuit signal system is disconnected, and the input and outlet of the detection system and the communication line are detected.

2. Abrupt cessation under normal conditionsThe safety lock falls off and the safety lock B. is reinstalledIf the system is abnormal, please ask the repair personnel to deal with it.

3. Button failure aIf the button is damaged, replace the button BIf the cable is broken, replace the cable.

Fourth, common faults** E01 speed signal loss, check whether the induction line is installed, whether the interval between the magnet and the magnet is 3-5mm E02 overvoltage protection, the load is too large, the motor input voltage is too high, turn off the power supply, restart the E03 overcurrent protection for more than 5 seconds, the motor input current exceeds 15A, set up protection to protect the motor and controller, turn off the power supply, and restart the E04 motor open circuit, confirm whether the motor power supply is correct, whether the communication line is connected and confirm whether it is correct E06 Communication Tong before the rotten error, check whether the column is connected, re-access and plug in the e07 safety lock to fall off, reinstall the safety lock E09 Ascension correction error, check whether the ascension motor is connected, and make sure it is correct, re-calibrate the e0p speed leakage correction error, enter the engineering correction mode, confirm whether the wheel diameter is correct, re-calibrate it, if the motor has abnormal sound, or 1km speed, whether the treadmill has strength, adjust the torque value of the controller to the appropriate number. Hope it helps.