What are the technical measures to ensure safety?

1. Ensure safety by operating in strict accordance with regulations in the work, and not violating rules and disciplines.

In the bits and pieces of daily work, we must establish "safety first".

1. Operate according to regulations". Due to the particularity and complexity of the maintenance and inspection work, we must not act with experience, and we must resolutely put an end to habitual violations, because any habitual violations of rules and disciplines may push themselves to the brink of danger.

2. Ensure safety by taking safety as a responsibility and obligation in daily work.

Without security, not only will the business suffer, but our families and ourselves will suffer indelible pain. As an automated maintenance personnel, safe production is our obligation, and our work requires us to work safely and maintain safely, otherwise it may cause danger or accidents.

3. Ensure safety through reminders and advice in daily work.

It is inevitable that there will be some negligence in actual work, and small mistakes may bring great pain to people and great losses to enterprises. Therefore, it is important to be reminded all the time.

4. To ensure safe production in daily work, it is necessary to operate according to regulations, to establish responsibilities and obligations, and to remind and advise from time to time.

For the development of enterprises, personal safety, and family happiness, it is necessary to improve safety awareness and eliminate human insecurity factors; It is necessary to strengthen the investigation of potential safety hazards and reduce the unsafe state of things; It is necessary to establish and improve the safety responsibility system, eliminate management defects, and realize the intrinsic safety of the enterprise.

1) To work on electrical equipment or lines with total or partial power outages, power outages, power inspections, and installation of grounding wires must be completed.

Hang signs and install technical measures such as shielding.

2) When the staff is carrying out work, the distance between the normal range of activities and the live equipment should not be less than the safety regulations.

3) Electrical safety equipment. In order to prevent electrical workers from accidents such as electric shock, arc burns, and falls from heights in their work, they must use electrical safety tools that have passed the test, such as insulating rods, insulating clamps, insulating baffles, insulating gloves, insulating boots, insulating shoes, insulating tables, insulating pads, and electroscopes.

High-voltage nuclear phaser, high and low voltage ammeter.

Wait; General protective safety equipment such as portable grounding wires, temporary shields, warning signs, goggles, and seat belts should also be used.

Wait; The safety distance between the normal range of activity and the live equipment is less than 10 thousand volts: meters; 35 kV: m; 110 kV: m.

1. Technical measures to ensure safety, power outage: disconnect the switch.

2. Technical measures to ensure safety, electrical inspection: the electroscope must be qualified with the same voltage level.

3. Installation of grounding wire: The installation of grounding wire must be connected to the grounding end first, and then to the conductor end; The order in which the ground wire is removed is reversed. The grounding wire should be multi-strand soft and bare copper wire, and its cross-section should meet the requirements of short-circuit current, but not less than 25mm2.

4. Hang signs and install fences: "No closing, someone is working" signs should be hung on the operating handles of switches and knife switches that can be sent to the work site or construction equipment once closed.

The organizational measures to ensure safety when working on electrical equipment are:

1) Work ticket system.

2) Work permit system.

3) Work guardianship system.

4) Work interruption, transfer and termination system.

The technical measures to ensure safety are as follows:

1) Power outage. 2) Electricity inspection.

3) Install a grounding wire.

4) Hang signs and install barriers.

Safety technical measures include: coal mine safety technical measures, non-coal mine safety technical measures, petrochemical safety technical measures, metallurgical safety technical measures, construction safety technical measures, water conservancy and hydropower safety technical measures, tourism safety technical measures, etc.

According to the categories of dangerous and harmful factors, it can be divided into: fire and explosion prevention safety technical measures, boiler and pressure vessel safety technical measures, lifting and machinery safety technical measures, electrical safety technical measures, etc.

According to the causes of accidents, it can be divided into: safety technical measures to prevent accidents, safety technical measures to reduce accident losses, etc.

Power Outage: Disconnect the switch. Electricity test:

Use an electroscope with the same voltage level and qualified. Installation of grounding wire: The installation of grounding wire must be connected to the grounding terminal first, and then to the conductor end, and the order of removing the grounding wire is reversed.

Hanging signs and installing fences: In the work site, construction equipment and the operation handle of the switch and knife switch that can send power to the work site or construction equipment once closed, the sign of "no closing, someone working" should be hung. <

1. Power outage: disconnect the switch.

2. Electrical inspection: An electroscope with the same voltage level and qualified must be used.

3. Installation of grounding wire: The installation of grounding wire must be connected to the grounding end first, and then to the conductor end; The order in which the ground wire is removed is reversed. The grounding wire should be multi-strand soft and bare copper wire, and its cross-section should meet the requirements of the Qiling section of short-circuit electricity, but not less than 25mm2.

4. Hang signs and install fences: In the work site, construction equipment and the operation handle of the switch and knife switch that can be sent to the work site or construction equipment once closed, the sign of "no closing, someone working" should be hung.

1. Power outage: disconnect the switch.

2. Mino electrical inspection: an electroscope with the same voltage level and qualified must be used.

3. Installation of Zhenwei shouting grounding wire: the installation of grounding wire must be connected to the grounding end first, and then to the conductor end; The order in which the ground wire is removed is reversed. The grounding wire should be multi-strand soft and bare copper wire, and its cross-section should meet the requirements of short-circuit current, but not less than 25mm2.

4. Hang signs and install fences: In the work site, construction equipment and the operation handle of the switch and knife switch that can be sent to the work site or construction equipment once closed, should be hung with the sign of "no closing, someone working".