-
Anonymous users2024-02-08Hello, a vehicle like Shengda can directly use No. 92 fuel. Of course, if conditions allow, you can add 95 fuel.
-
Anonymous users2024-02-07Hello, now the national five gasoline has been popularized in the country, that is, now there is only 92, 95, 98 gasoline, this car according to the manufacturer's owner's manual marked, there is no problem with adding 92 gasoline.
-
Anonymous users2024-02-06High-grade gasoline has good combustibility, strong anti-knock resistance, less impurities, and is not easy to form carbon deposits in the cylinder. With an increase in power, fuel consumption will also be slightly reduced. No. 97 is recommended.
-
Anonymous users2024-02-05You can add No. 92 oil to this, but the combustion of the oil level is more sufficient, and the carbon deposit will be less, and it still depends on yourself.
-
Anonymous users2024-02-04According to the manufacturer's requirements, there is no problem with the new Shengda car with No. 93 oil. There is no need to go to refill the 97 oil.
-
Anonymous users2024-02-03According to the manufacturer's advice, the new Shengda car can add No. 92 oil, and No. 95 is no problem if conditions permit.
-
Anonymous users2024-02-02Hello, this is currently 92 gasoline, and 95 gasoline, this car should need to add 95 gasoline.
-
Anonymous users2024-02-01Hello, Shengda can use No. 92 gasoline. If you don't care about the price of oil, you can use No. 95 to be better!
-
Anonymous users2024-01-31Hello, what is the original number of this car? If it's 92, you add 92, and if it's 97You add 95
-
Anonymous users2024-01-30Hello, according to the manufacturer's regulations, this car is OK to add 92 gasoline, there is no need to add 95.
-
Anonymous users2024-01-29Hello, the new Shengdaga No. 92 oil will do. That is, the previous No. 93, there is no need to add a higher number.
-
Anonymous users2024-01-28This car can be added according to the requirements, 92 gasoline is enough, there is no need to add higher grade gasoline.
-
Anonymous users2024-01-27Hello, this model is relatively speaking, just use 92 gasoline directly, there is no big problem.
-
Anonymous users2024-01-26Check the parameters, fuel label: No. 93 (Jing No. 92).
Compression ratio: None.
The meaning of gasoline labeling: We usually say 90, 93, 97, 98 (Beijing standard) gasoline, this value represents the gasoline label, that is, the ratio of the actual gasoline anti-knock resistance to the anti-knock of standard gasoline. The higher the grade, the stronger the anti-explosion performance.
Fuel selection standards:
The only criterion for choosing a gasoline grade is the compression ratio of the car's engine. Generally speaking, the higher the compression ratio, the smaller the volume of the flammable mixture to be compressed, the more powerful it is, and the lower the fuel consumption. However, the compression ratio has to be matched by another index, which is the anti-knock index of gasoline, also known as octane number, that is, gasoline labeling.
The higher the compression ratio, the higher the anti-knock index of gasoline, that is, the higher the grade of gasoline.
Hello, No. 97 gasoline is higher than No. 93 gasoline compression ratio, but also a little more expensive, generally engine compression ratio below 7 to choose No. 90 oil; >>>More
Recently, some netizens posted, saying that No. 95 gasoline is not only pure, but also good for the engine and has a long mileage. Automobile experts said that the gasoline label has nothing to do with the purity of the oil, and which grade of gasoline to add should be decided according to the actual situation of the car, and cannot be "blindly high". >>>More
Carbon dioxide is produced after alcohol is burned.
Follow the water. Methanol fuel, environmentally friendly oil, burns out, and produces other than alcohol, which is not environmentally friendly. >>>More
The quenching of steel is a heat treatment process in which the steel is heated to a temperature above the critical temperature AC3 (sub-eutectic steel) or AC1 (super-eutectic steel), kept warm for a period of time to make it fully or partially austenitized, and then cooled to below ms (or isothermal near ms) at a cooling rate greater than the critical cooling rate for martensite (or bainite) transformation. Solution treatment of materials such as aluminum alloys, copper alloys, titanium alloys, tempered glass, etc., or heat treatment processes with a rapid cooling process are usually referred to as quenching. >>>More
Gel is also known as jelly gum. The colloidal particles or polymers in the sol or solution are connected to each other under certain conditions to form a spatial network structure, and the structural voids are filled with the liquid as a dispersion medium (in the dry gel can also be a gas, the dry gel is also called aerogel), such a special dispersion system is called a gel. It has no fluidity and often contains a large amount of liquid inside. >>>More