Why does my computer record loud and quiet?

Dizzy.. Hear you say so. It's not that the contact is not enough. It must be a problem with the sound card, so you don't have to reinstall the system anymore. Try it with the all-purpose drive. If it still doesn't work. 。The only way is to change the sound card.

Make sure your microphone is available to plug in to another computer, or it may be related to the distance between your mouth and the microphone when you record.

Reinstall the sound card driver.

When recording, you must wear headphones and not turn on the speakers.

Another low-level mistake is that the microphone is plugged in the wrong place.

Let's try it first, I also love to play recording, I wish you to find the reason soon, you can send me a message.

The sound driver has been reloaded.

I listened, it's not bad contact, and neither will the software. The problem should be on the zai sound card.,Change the driver to see.,It's really not good.,Congratulations.,Change the card.。

Try a different microphone, it may be**bad contact.

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume setting of the morning mask in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform Change" in the pop-up "Volume Control" dialog box, or is set to mute.

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver of the sound card has been properly installed.

You reinstall the sound card driver and reset the reed key stove to see if there is any improvement, and you may want to consider whether the microphone's voice pickup sensitivity is reduced, and try to change the microphone to brighten the microphone.

If there is no sound on the computer, you can use the following methods to fix it and let the computer sound reappear.

1.I want to perfectly solve the problem of "what should I do if the computer has no sound" and its sequelae. Please first do a free antivirus, scan the local disk, and remove the existing malicious virus Trojan programs.

2.After making sure that there is no Trojan virus in the system, use the system file repair tool provided by Keniu Antivirus to carry out a comprehensive system file restoration and repair, and you can solve the phenomenon that the computer has no sound.

In addition, according to experience, the reasons for the problem of "what should I do if the computer has no sound" for many users are as follows

1. Check whether the sound card, cable, speaker and other equipment are connected normally; Run anti-virus software for anti-virus;

2. Right-click "My Computer" --Properties--Hardware"--Device Manager", and open "Sound, ** and Game Controller" for any problems, that is, see if there is any yellow in the front

If so, reinstall the driver for this device to solve the problem;

4. When there is no sound and no speaker, open the control panel--- Add and Remove Programs--- Add and delete the cherry ridge to remove the windows component, put the check mark in front of "Accessories and Tools", click "Next", and then, shut down and restart, the system will prompt you to install new hardware, follow the prompts to install;

5. Uninstall the sound card driver, reinstall or upgrade the audio driver;

6. When the sound card driver is installed, the prompt "AC chip cannot be found" appears, it may be that the computer is poisoned, or the sound card driver has been deleted by mistake due to illegal operation, or the solution to the internal software conflict is to reinstall the system and driver.

7. Simply ignore it, wait for a period of time after shutting down and then turn it back on, sometimes the sound problem will solve itself, you may wish to try it.

8. Start - Control Panel - Sound and Audio Equipment - Sound, see if it is set to silent, and then select Windows Default.

9. Click Start Run, enter regedit, enter Kitong, this opens the registry, click a few hkey-current-user, and then click on the controlpanel item, and then click the beep in the sound under it to change its value from no to yes restart, is it to hear the long-lost power on and off sound again.

10. Delete the original account, create a new account, so that there is a sound on and off, it may be a problem caused by an error in the user profile, you can first open the guest user guest, try to see if there is a switch sound, if there is any, you can use the above method, first to create an administrator account, and then click on your account with the problem, and then press the prompt to delete, in the process of deletion it will also prompt whether to keep the files of the original account, When deleting it, it's a good idea to back up your favorites, as well as the folders created by the installer in the start menu, and then copy them back when you're done.

See if this solution solves your problem.

Since you suspect that it is a problem with Sogou, then** Keniu free antivirus software, which has a browser browser doctor can repair the changed homepage, and there is also a software shredder that can smash Sogou. I think these two things are better than other antivirus software, and other killing or antivirus software can't crush the Wenbi dilemma that it can

[Problem description]:

There is a murmur in the voice.

Cause Analysis]:

1.There is electromagnetic interference next to the sound output device.

2.The sound output equipment is aging.

3.Sound-related hardware acceleration setup issues.

Easy Steps]:

Solution]:

Solution 1: There is electromagnetic interference next to the sound output device, poor contact of the audio interface, etc., such as: mobile phone interference, the speaker interface is not firmly plugged in, etc.

Solution 2: The sound output equipment is aging, and if the sound is too loud, it will emit a whistling sound, and the sound output equipment such as the sound output device will be replaced.

Figure 3 [Problem Description]:

There is a murmur in the voice.

Cause Analysis]:

1.There is electromagnetic interference next to the sound output device.

2.The sound output equipment is aging.

3.Sound-related hardware acceleration setup issues.

Easy Steps]:

Solution]:

Solution 1: There is electromagnetic interference next to the sound output device, poor contact of the audio interface, etc., such as: mobile phone interference, the speaker interface is not firmly plugged in, etc.

Solution 2: The sound output equipment is aging, and if the sound is too loud, it will emit a whistling sound, and the sound output equipment such as the sound output device will be replaced.

Hardware acceleration of the sound of the win7 system needs to be set in safe mode).

Figure 45Restart your computer and start Windows normally.

The microphone tube is the microphone, and it's good to set it up.

Turn up the volume of the microphone.

Is the volume of the accompaniment turned up too much?

Listen to this device and remove the tick.

Many old computers (used for more than two or three years), the lack of lubricating oil in the bearing of the fan in the computer, plus the dust accumulated for many years, etc., will make the fan noise particularly loud when it is turned on. This is due to the intense grinding, but it will be good to run it for a while.

There are two steps to solve the hail problem in Changcao, 1: open the case cover and gently clean the dust in the case with a brush. And it's best to clean it regularly, which is also good for the motherboard and memory, because too much dust can absorb moisture in the air, which may harm the chip.

The fan lacks oil, the bearing of the fan is cold when it is turned on, and the sound of friction caused by tight fit is tight, and after a while, the bearing is disturbed and hot, and the fit is loose, and the sound is smaller. Solution: One is to change the fan, and the other is to refuel the fan to slow down the collapse.