What software is this wifi router! 30

2.Before installation, the sharing wizard will detect whether the local computer has two network cards (one network cable to connect to the Internet, and the other is used as a wifi hotspot output), and run the necessary plug-ins of the sharing wizard, such as: net frame sp1, etc.

Once the installation is complete, it's a good idea to restart your PC

Enter the name you want to share in the hotspot name on the main interface, and then click "Start" on the right, after a while, the word "Start" will change to "Stop", which means that you can share the network without password

3.If you want to set the wifi sharing password to share the network, you can choose the sharing mode as "point-to-point ad-hoc, wep encryption", and then enter the wifi password at the top of the sharing password, click "start", you can realize the password sharing network:

The word "start" on the interface of the wifi sharing wizard of the wifi sharing wizard will become "stop":

4.When a Wi-Fi terminal device is connected to a hotspot shared with Wi-Fi Sharing Genie, the connected device will be displayed on the connection status on the main interface. If you uncheck the box under Network Sharing, it means that the device is not sharing the network, which means that the device is not allowed to access the Internet

You're logging into the router......

So if you can use a computer, can you use a router, can you use a router?

Generally, if you can't access the Internet in this case, first check the line fault, then check whether there is a problem with the IP address setting of the computer, and then check whether the router status can dial up the Internet normally.

Did your local broadband provider block your account? Many places restrict the use of router dialing,You directly use the computer to connect the cat dial-up try,If you can dial up,Go into the router settings》Network settings》WAN settings,There is a MAC address cloning function,Clone the MAC of the computer network card to the router。 If that doesn't work, just search the Internet for how to use a router for broadband in your city, and you should find results.

Re-install the next one!

After the power is turned on, connect the wireless router to the computer, open the browser and enter in the address bar: to enter the settings interface of the wireless router. According to the setup wizard step by step, select the Internet access method, and restart the wireless router after the setup is completed.

Next, go to the wireless settings and set the SSID name

Wireless routing is turned off DHCP and the line is plugged into the LAN port, which does not play the role of routing, but only plays the role of bridging.

Connect with a wireless device. Set it up first.

How to set up a shirt on a wireless router to know the pure cavity pants group.