Is there a way to make the internet faster, such as configuration or whatever?

As long as the general machine has a network card, the network speed has little to do with the hardware, and it is a bit effective to use some optimization software.

If you have a single machine connected to the Internet, there is no way, because the speed is already set in Netcom or Telecom.

Call ** to the ISP and ask for more bandwidth. Of course, you also have to pay.

If it's an XP system.

Right-click on the "My Computer" icon on the desktop and select the "Properties" option in the context menu that appears to open the "System Properties" window. Click the "Advanced" tab in the window, and a dialog box for advanced settings appears;

Click the "Settings" button in the "Performance" area and select the "Advanced" tab in the "Performance Options" window that appears to open its dialog box.

In this dialog box, you can see the area about virtual memory, click the "Change" button to enter the "Virtual Memory" setting window. Select a partition with a large free capacity, check the box before "Custom size", fill in the specific values in the "Initial size" and "Maximum" columns, then click the "Set OK" button, and finally restart the computer to make the virtual memory settings take effect.

According to the general setting method, the minimum and maximum value of the virtual memory swap file can be set to multiple the memory capacity at the same time, but if the memory itself is relatively large, such as 512MB, then it occupies a considerable amount of space. Therefore, we can set the basic value of virtual memory as follows: if the memory capacity is less than 256MB, it will be set to a multiplier; If it is more than 512MB, it is set to half of the memory capacity; Between 256MB and 512MB is set to the same value as the memory capacity.

By: Kinllen

Senior Manager. Level seven.

Reviews have been closed. Currently, there is.

Personal evaluation. Good.

Not good. Related questions.

Do I still use virtual memory, my machine is amd4400+160g....

Do I still use virtual memory, my machine is amd4400+160g....

What are the benefits of tuning virtual memory.

How to tune virtual memory.

How to adjust the minimum and maximum values of virtual memory for 768 memory modules.

You turn IE on, click on Tools, Internet Options, and put Internet

Temporary file deletion so that you can speed up your mesh browsing.

.First. Your browser. Choose one with a faster connection speed.

Second. Your hardware system is not fast enough.

Third. The way you choose to get online. For example, broadband. Wireless. Optical fiber. Or something else.

Fourth. Depends on whether the routing addressing capability you use is relatively fast.

Fifth. How many users are in your network segment. If there are many users, the traffic will be high. Internet access is slower.

Pro version of Windows

XP retains 20% of the bandwidth by default, which is actually of little use to us individual users. In particular, it is better to make the most of it if it is idle.

Enter in Start Run to open Group Policyr. Find "Computer Configuration Management Template Network QoS Packet Scheduler", select "Limit Retained Bandwidth" on the right, select "Properties" to open the "Limit Retained Bandwidth Properties dialog box", select "Enable", and change the original "20" to "0", so that the reserved bandwidth is released.

Hehe. To give you a brief.

It's complicated, and you can't understand it again.

Take a look at your computer's hardware configuration.

Like what. The size of the memory module.

Matter. The memory is high, and the Internet is naturally fast.

That's what they said upstairs.

The fiber optic internet speed is absolutely fast.

Check if your home network cable is more than 200 meters connected to the computer.

Exceeding 200 meters will affect the internet speed.

The previous person also talked about using an accelerator.

Some can be used, and some can't.

Because you're going to see.

How many people use this fiber.

Because the flow output of the computer room is limited.

You use accelerators.

Then the traffic will be unstable.

Instead, it will cause the result of disconnection.

The question you said.

First you have to look at your hardware configuration.

Memory is key.

Also, regularly clean up computer viruses and Trojan horses, which can cause your internet connection to slow down.

Then it's time to look at your cat's traffic.

If it's small, it's naturally not tuned.

…1. The influence of viruses, Trojans, malware and other factors can cause slow network speed.

2. The parameter setting of machines and network equipment will also directly affect the speed of the network. Clever Fight.

3. The quality of hardware equipment such as network cards, network cables, switches, routing, and cables also has a crucial impact on network speed.

4. Internet access, such as peak hours, will also affect the network speed.

6. There is also the problem of bandwidth occupancy, such as opening many network programs at the same time, which will occupy a part of the bandwidth; There is also the sharing of the network, which also has to be divided into a part of the bandwidth.

7. There are many, many, and many, which requires you to pay more attention to it.

As long as it is just installed in the system and has a good configuration of the electric stove brain, its speed is the fastest in the group, and you don't have to think about anything else, you can hit 10000 in the card, and you must argue or pretend to be a problem with the telecom company.

The speed of the network depends on your network speed, even if the computer ten years ago, the network speed of 2M, at that time and the computer and the current computer were the same, and the access speed of the hard disk is dozens of times or even hundreds of times the network speed.

If you exclude the problem of the machine itself (no junk files, optimization services, startup items, no running too many upload software such as Thunderbolt PPS, etc.), the effect of improving network speed is not great, because network speed is related to your network bandwidth for a reason, and the fundamental solution to the problem is to improve the bandwidth, and the general optimization of network speed is not very ideal.

The next P2P terminator will see if it doesn't work and go to Netcom to open a 10 megabit fiber.

Khan: Your current computer configuration needs to be listed to give you advice, buddy.

Many friends don't know that by default, Windows

For the sake of security and stability, the XP system retains 20% of the system bandwidth. For the average individual user, this is obviously a bit conservative and wastes valuable network bandwidth. So how to recover this part of the knowledge base resources?

Bandwidth is the difference between the highest and lowest frequencies that can be used by a communication signal. We know:

The wider a highway is, the greater the amount of traffic that can be passed per unit of time. If the transmission rate of a network signal is likened to the flow of traffic, then the bandwidth is equivalent to the width of a road. So, modify Windows

The original setup of the XP system fully exploits this 20% bandwidth potential, which will maximize the Internet speed. Modify Windows

The method of setting up this in the XP system is as follows:1Click Start Run, type:

After clicking the OK button, you can see the Group Policy window. 2.Under the "Computer Configuration" item, click on:

management template - network - qos packet scheduler; Then on the right side of the window, find the item "Limit Reservable Bandwidth" and right-click on it. In the pop-up menu, click "Properties", and you will see "Limit Reservable Bandwidth."

Properties window. 3.In the Settings tab we can see: Windows

The default value of the XP system is 20%. Change it to a lower number such as 0 or 5% and click the "Enabled" radio button; Then click the [OK] button to save the new settings to your computer.

Once you've completed the above three steps, restart your computer and try again. Now your bandwidth is truly available to you!