How to apply for the 3C certificate? What information do I need to provide?

The 3C certificate is first applied for online at CQC, and then the relevant documents and samples are sent to CQC in Beijing as required after receiving the email. Then, the document is approved, and the type report is obtained after the product test is passed. Finally, the on-site audit.

The information required for 3C certification is as follows:

Application for compulsory product certification; A copy of the applicant's Business License of Enterprise Legal Person or registration certificate (provided at the time of initial application or change); Organizational chart of the production plant (provided at the time of initial application or change); Process flow diagram of the product applying for certification (provided at the time of initial application or change); List of key instruments and equipment for routine inspection (see certification implementation rules, factory quality control testing requirements) (provided at the time of initial application or change); Product diagram, electrical schematic diagram; Chinese nameplate and warning mark of the product applying for certification (in duplicate); Chinese instruction manual for applying for certification products; A description of the differences between the various models of products in the same application unit; Appearance of each model product in the same application unit** (in duplicate); Other relevant information as required (if you have a CB test report).

Not a ** can apply, as far as I know, the application methods of various provinces and municipalities directly under the central government are not the same, you can go to your local inspection and suggestion agency to consult, and you can go to the commodity inspection company of the Beijing Inspection and Suggestion Bureau to apply. Hope it helps. MCC.

You can apply online at 3C. Or directly find a ** agency to do, ** agency, you have to pay a service fee, the advantage is that you can try, rectify, and ensure 3C

Common steps: Apply for ---type test--- factory inspection--- conformity assessment --- certification.

Our company can help you handle it, and I will do it.

Application for Intent for Certification;

Formal application for certification;

Certified a copy of the business license of the enterprise invited by Shen Jingshan;

A copy of the applicant's organization certificate;

5.Product description documents for applying for 3C certification;

6.Product diagram, electrical schematic diagram or circuit diagram;

7.Key components, bill of materials;

8.The difference between the products of each model in the same application unit is accompanied by a description of the differences;

9.Declaration of Conformity;

10.product nameplate;

Certified Factory Audit Questionnaire;

12.Procedure documents, quality manuals, record forms, process flow charts, and work instructions of the production plant;

The report is within the validity period;

14.Passed testing or 3C certified factory audit report;

15.Power of Attorney from a third party.

Generally, certification is required to open a factory, so how to handle 3C certification? I'm going to talk to you about it today, I hope it will be helpful to you. 1. Certification entrustment and application, the information must be guessed and signed on paper, stamped with the company's seal, in duplicate.

2. The product is sent for sample testing, the number of finished products of each product is five, and the test will be completed within 30 working days after receiving the test sample.

3. Initial factory audit, factory audit can only be carried out after passing the test, the time is about three weeks according to the CQC plan, and the old factory does not need it.

4. The evaluation and approval of the certification results, sample testing and factory audit are all passed before the official approval of the 3C certification certificate.

5. The application and use of the logo, the production of CCC logo CAD drawings and the simple setting of the tassel mill on the product, submitted to the logo center for review.

6. After obtaining the certificate, CQC conducts a virtual supervision audit on the certified factory every year to evaluate the production capacity.

Dear, I inquired for you that 3C certification refers to China compulsory certification, which mainly involves the certification of electrical appliances, computers, communication equipment, automobiles, security, toys, sports equipment and other Wuqiao products. Some products that need to be certified by 3C are not allowed to be produced, sold, imported and other activities in China if they do not hold a legal certification certificate. If you want to apply for 3C certification, you can take the following steps:

1.Learn about product certifications. First of all, you need to determine whether your products need to be certified by 3C, and you can inquire and consult through the official ** or call ****.

2.Prepare application materials. To apply for 3C certification, you need to provide a series of documents and materials, including supporting materials, product samples, test data and reports, etc.

The certification requirements for different products may be different, and applicants need to prepare relevant materials according to the actual situation. 3.Entrust testing to a certification body.

Product samples can be sent to the designated certification body for testing, and the test report can be obtained after passing the test. 4.Submit the application and approve it.

Submit the test report and other application materials to the relevant institutions for approval, and obtain the 3C certification certificate after approval. It should be noted that 3C certification is a mandatory certification, which involves the safety and quality of products, so applicants need to apply and operate in strict accordance with the regulations to ensure that the application process meets the relevant standards and requirements. The above cavity buried key information ** Zhihu.

Stage 1: Application acceptance.

After receiving the application that meets the requirements, the certification body will issue a notice of acceptance to the applicant, informing the applicant to send or send the relevant documents and information.

At the same time, the certification body sends relevant charges and notices.

The applicant shall provide the information to the certification body as required.

After the applicant pays the fee, fill in the payment voucher as required.

Phase 2: Documentation review.

In the data review stage, the product certification engineer needs to divide the application into units.

After the unit is divided, if a sample test is required, the product certification engineer will send a sample delivery notice and the corresponding payment notice to the applicant, and at the same time, notify the applicant to send a sample receipt notice to the corresponding testing institution.

Phase 3: Sample acceptance.

The sample is sent directly to the testing institution by the applicant.

After the applicant pays the fee, fill in the payment voucher as required.

The testing institution will accept the collected samples, fill in the sample acceptance report, and issue a sample rectification notice for unqualified samples, and fill in the sample acceptance report after rectification.

After the sample is accepted, the testing institution fills in the sample testing schedule and submits it to the certification body.

After receiving the sample testing progress, the certification body will issue a formal acceptance notice to the applicant after confirming that the relevant fees of the applicant have been paid, and issue a testing task book to the testing agency, and the sample testing will officially begin.

Phase 4: Sample testing.

The work that the enterprise should do in the type test stage is: send test samples, required parts and technical information, understand the progress of the test, and rectify in time in accordance with the sample test rectification notice if there are nonconforming items.

After the sample test is completed, the testing institution fills in the sample test result notice.

The testing agency also transmits the test report and other information to the certification body.

Stage 5: Factory Audit.

For applications that require a factory audit, the testing agency organizes a factory audit.

Preliminary preparations for a factory inspection include: agreeing with the certification body on the date and personnel of the factory inspection; Preparation of documents and records in accordance with the requirements of factory inspections; Schedule the production line to start up during the factory inspection.

Enterprises should cooperate with the work of the factory inspection team in strict accordance with the requirements of the factory inspection. According to the confirmed non-conformities and factory inspection conclusions, complete the rectification of non-conformities as soon as possible.

Stage 6: Conformity Assessment.

The product certification engineer collects and sorts out the results of each stage and conducts a preliminary evaluation.

The conformity assessor will re-evaluate the above results.

Stage 7: Certificate Collection.

The certificate is issued by the director of the certification body.

The applicant prints out the voucher and picks it up at the certification body or asks to send the certificate.

Post-certification supervision:

If the product produced is inconsistent with the sample of the type test, it should be confirmed by the certification body before production.

The date of normal supervision is agreed with the certification body.

At the time of supervision, the production line should be in normal production, and there should be certified products in the factory or a certain amount of products can be provided for sampling (e.g., outside warehouses, markets, etc.).

Be prepared to supervise the required documents and records.

Confirmation of non-conformities and supervisory conclusions.

Complete the rectification of non-conformities as soon as possible.

Legal analysis: The 3C certification process of most products is: certification application, type test, initial factory inspection, evaluation and approval of certification results, and post-certification supervision.

Frequency of post-certification supervision (annual review): generally once a year, and the toy category is once every six months. The 3C certification process is complex (involving application, testing, factory inspection, etc.), and there are many offices involved (the application must be applied to the Beijing CQC headquarters, the test is carried out in the local laboratory, and the factory inspection needs to contact the local CQC sub-center), and the document requirements are many (there are more than 20 professional documents to be submitted for application and testing, and there are more than 80 documents required for factory inspection).

Therefore, this requires high professional knowledge and coordination ability, and for many production enterprises, it is difficult to handle 3C certification and obtain certification certificates without experience.

Legal basis: Product Quality Law of the People's Republic of China

Article 8 The market supervision and management department is in charge of the national product quality supervision. The relevant departments are responsible for the supervision of product quality within the scope of their respective responsibilities.

The local market supervision and administration department at or above the county level shall be in charge of product quality supervision within its administrative area. The relevant departments of the local people's government at or above the county level shall be responsible for the supervision of product quality within the scope of their respective responsibilities.

Where the law has other provisions on the supervision department of product quality, it shall be implemented in accordance with the provisions of the relevant laws.

Article 9 The people's staff at all levels and the staff of other state organs shall not abuse their powers, derelict their duties or twist the law for personal gain, shield or indulge the acts that violate the provisions of this Law in the production and sale of products in their own regions or systems, or obstruct or interfere in the investigation and handling of violations of the provisions of this Law in the production and sale of products in accordance with the law.

Where local people** at all levels and other state organs harbor or indulge in acts that violate the provisions of this Law in the production or sale of products, the legal responsibility of their principal responsible persons shall be pursued in accordance with law.