How does a Windows 7 wireless network card share the network to the mobile phone wifi Internet acces

1. Preliminary preparation.

1.First of all, install the Vista wireless card driver and the quickon button driver (installed in Vista compatibility mode) correctly

2.Make sure that the wireless network card can be turned on through the shortcut keys on the laptop or other means.

Second, the establishment of bridges.

1.Open the Network & Sharing Center - Change Adapter Settings, and you'll see Local Connections and Wi-Fi Connections in Network ConnectionsFor a bridge to be successfully created, more than two network connections must not be shared.

Right-click to set the properties of "Local Connection" and "Wireless Network Connection" respectively, and make sure that "Allow other network users to connect through this computer's Internet connection" is not checked in "Sharing".

2.Unplug the network cable and see that both network connections are in a cross-cut state. "Ctrl" to select the two network connections, right-click "Bridge".At this point, the bridge is successfully established.

Three: Plug in the network cable and turn on the wireless network card.

4. Set up a temporary wireless network.

Network Sharing Center" -- Set up a new connection or network -- Set up a wireless temporary network, in the setting page, "Network Name" is customized, "Security Type" is selected as "No Authentication" (no password, easy to operate), save this network (for easy use in the future), click Next, and the wireless network is successfully established.

Open the Network and Sharing Center - > Manage Wireless Network - > Add - > Create a Temporary Network Finally, select Shared Network. After that, just use wifi to connect to the newly created wireless. If encryption is not good at creating a new one, it is best not to encrypt it.

This is possible if you are sure that your phone has WiFi and can search for other signals. If the mobile phone is bought in the mainland, the wifi function is generally canceled. It mainly depends on how to set up your phone!! ]

You need the Ultimate version to set up your home network and make your phone a member. You can share the Internet. ]

Share your broadband connection settings to your Wi-Fi connection if you need to dial-up, and share your local connection settings to Wi-Fi without dialing.

Create a batch file with the following contents:

netsh wlan set hostednetwork mode=allow ssid=your wireless network name key=network password.

netsh wlan start hostednetwork or enter the above two commands in the cmd command prompt, the encryption mode is wpa2-psk, the password is more than 8 digits, and the corresponding client network settings should correspond to the network ID, encryption mode and password set above.

The prerequisite is that the wireless card driver has been installed, and then the subsequent setup is carried out:

1. Press Win+R, enter cmd, and click OK;

2. After the prompt, enter: netsh wlan set hostednetwork mode=allow, press enter; 3. After the prompt, enter: netsh wlan set hostednetwork ssid=android key=12345678 (ssid is the name of wifi, key is the password, the password here must be at least 8 digits), press enter;

4. After the prompt, enter: netsh wlan start hostednetwork, press enter;

5. Enter exit to exit;

6. Press win+r, enter, click OK, right-click the local connection, and select attributes;

7. Click the Share tab, check Allow other network users to connect through the Internet connection of this computer, select Wi-Fi connection for home network connection, and click OK.

Control Panel All Control Panel Items Network & Sharing Center--- Set up a new connection or network If you have a wireless network card, there will be 5 options below, just set up a temporary network. You try.

Question supplement: Basic situation: A desktop computer equipped with win7 flagship system, 2m network and sharing center of Netcom annual subscription-

Run Command Prompt as administrator:

1. Shortcut key win+r Enter cmd and press enter

2. Enable and set the virtual wifi network card

Run the netsh wlan set hostednetwork mode=allow ssid=ace-pc key=12345678".

Press enter again

3. Set up Internet connection sharing

After the command is successfully run, there will be an extra network card in the network connection as "wireless network link 2", renamed as virtual wifi, right-click the network connection that has been connected to the Internet (here is cmcc-edu), select "Properties" "Share", and tick "Allow others··· Connect (n)" and select "Wi-Fi Link 2".

4. After confirmation, the word "shared" will appear next to the icon of the network card that provides sharing, indicating that the "broadband connection" has been shared to the "virtual wifi".

5. Turn on the wireless network

Continue running in the command prompt: netsh wlan start hostednetwork, wifi connection successful

6. Every time you open and click in the future, the shortcut key win+r enters cmd Press the enter key to enter, paste the netsh wlan start hostednetwork into it, press the enter key to enter, and you can connect to wifi.

Buy a small degree of wifi or 360wifi to let the mobile phone access the Internet.

I have a laptop wifi assistant here, which can easily get the laptop for mobile phone Internet access.

1. Use the administrator to open the wifi assistant, set the network name and password and create the network.

2. Open the network manager and see if you see the new network "Wireless Network Link 2". Then click on Local Link Attribute Sharing, and check Wireless Network Link 2, <>

3. Click the WiFi assistant "Turn on the network".

4. Turn on your phone to find the sharing hotspot and enter the password.

And then, no more.

Close the window and use your mobile phone to surf the Internet, so you don't have to worry about the traffic.

Convenient, you can put it in the QQ network hard disk or U disk, as long as there is a wireless network card on a business trip, you can take it out to operate, you can also set the boot start, turn off the network, delete the network, it is very convenient to manage. Friends who need this software can leave an email and send it to you.

It is possible to virtualize wifi hotspots and then share the network.

There's a software wifi sharing wizard that works very well and you can try it.

1. Run cmd as an administrator

2. Use the command netsh wlan set hostednetwork mode=allow ssid=The name of the wireless network to be established is preferably English key=8 digits (is the wireless network password).

For example, netsh wlan set hostednetwork mode=allow ssid=xiaozhou key=88888888

3. Open the network sharing center - the second item on the left seems to be to change the adapter, there will be an extra Microsoft virtual wireless connection in it, right-click the local connection (the one that has been connected to the Internet), select Properties, select Share, tick "Allow other network users to connect through the Internet connection of this computer", select the extra virtual wireless network card when selecting the network card, and click OK.

4. Enter the command: netsh wlan start hostednetwork You can directly search for network signals with wifi products such as mobile phones.

Mobile phone as well, you can try.